The maximum number of mempools per application needs to be configured
on HW during mempool driver initialization. HW can support up to 1M
mempools, Since each mempool costs set of HW resources, the max_pools
devargs parameter is being introduced to configure the number of
mempools required for the application.
For example:
-w 0002:02:00.0,max_pools=512
With the above configuration, the driver will set up only 512 mempools
for the given application to save HW resources.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
This patch adds an optimized arm64 instruction based routine to leverage
CPU pipeline characteristics of octeontx2. The theme is to fill the
pipeline with CASP operations as much HW can do so that HW can do alloc()
HW ops in full throttle.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
The DPDK mempool free operation frees HW AURA
and POOL reserved in alloc operation. In addition to that it free all
the memory resources allocated in mempool alloc operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
The DPDK mempool allocation reserves a single HW AURA
and POOL in 1:1 map mode. Upon reservation, SW programs the slow path
operations such as allocate stack memory for DMA and
bunch HW configurations to respective HW blocks.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add a helper function to dump aura and pool context for NPA debugging.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Register and implement NPA IRQ handler for RAS and all type of
error interrupts to get the fatal errors from HW.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Implement the low-level NPA HW operations such as
alloc, free memory, etc.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
NPA object needs to initialize memory for queue interrupts context,
pool resource management, etc. This patch adds support for initializing
and finalizing the NPA object.
This patch also updates the otx2_npa_lf definition to meet the init/fini
requirements.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This commit adds support for lock-free (linked list based) stack mempool
handler.
In mempool_perf_autotest the lock-based stack outperforms the
lock-free handler for certain lcore/alloc count/free count
combinations*, however:
- For applications with preemptible pthreads, a standard (lock-based)
stack's worst-case performance (i.e. one thread being preempted while
holding the spinlock) is much worse than the lock-free stack's.
- Using per-thread mempool caches will largely mitigate the performance
difference.
*Test setup: x86_64 build with default config, dual-socket Xeon E5-2699 v4,
running on isolcpus cores with a tickless scheduler. The lock-based stack's
rate_persec was 0.6x-3.5x the lock-free stack's.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The new rte_stack library is derived from the mempool handler, so this
commit removes duplicated code and simplifies the handler by migrating it
to this new API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
All drivers should have SPDX on the first line of the source
files in the format
/* SPDX-License-Identifier: ...
Several files used minor modifications which were inconsistent
with the pattern. Fix it to make scanning tools easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Changing the print to DP_DEBUG to avoid continuous prints when
buffer pools runs out of buffers
Fixes: 3646ccf0b0 ("mempool/dpaa2: support dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
We use _GNU_SOURCE all over the place, but often times we miss
defining it, resulting in broken builds on musl. Rather than
fixing every library's and driver's and application's makefile,
fix it by simply defining _GNU_SOURCE by default for all
builds.
Remove all usages of _GNU_SOURCE in source files and makefiles,
and also fixup a couple of instances of using __USE_GNU instead
of _GNU_SOURCE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch add the support for new Management Complex
Firmware version to 10.1x.x. One of the main changes in
the APIs ordered queue.
The fslmc bus lib ABI will need to be bumped to reflect
the MC FW API and structure changes.
This will also result in bumping of ABI verion of all dependent
libs as they internally use the MC FW APIs and structures.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With this patch, dpaa bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa, event/dpaa and net/dpaa as
they are dependent on the bus/dpaa and thus impact linkage of
libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
When the system goes out of buffers temporarily, the logs
further slow down the system. There is no need for this
continuos logs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.
Fixes: 02fd6c7443 ("mempool/octeontx: support allocation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There are two API's which are required by NXP specific Command Interface
Application (AIOP CMDIF). This patch exposes these two API's.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With Hotplugging memory support, the order of memseg has been changed
from physically contiguous to virtual contiguous. DPAA bus and drivers
depend on PA to VA address conversion for I/O.
This patch creates a list of blocks requested to be pinned to the
DPAA mempool. For searching physical addresses, it is expected that
it would belong to this list (from hardware pool) and hence it is
less expensive than memseg walks. Though, there is a marginal drop
in performance vis-a-vis the legacy mode with physically contiguous
memsegs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
With Hotplugging memory support, the order of memseg has been changed
from physically contiguous to virtual contiguous. FSLMC bus and dpaa2
drivers depend on PA to VA address conversion when in Physical
addressing mode.
This patch creates a list of blocks requested to be pinned to the
DPAA2 mempool. For searching physical addresses, it is expected that
it would belong to this list (from hardware pool) and hence it is
less expensive than memseg walks. Though, this has marginal impact on
performance vis-a-vis legacy mode with physically contiguous memsegs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Populate mempool driver callback is executed a bit later than
register memory area, provides the same information and will
substitute the later since it gives more flexibility and in addition
to notification about memory area allows to customize how mempool
objects are stored in memory.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Callback to populate pool objects has all required information and
executed a bit later than register memory area callback.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The callback was introduced to let generic code to know octeontx
mempool driver requirements to use single physically contiguous
memory chunk to store all objects and align object address to
total object size. Now these requirements are met using a new
callbacks to calculate required memory chunk size and to populate
objects using provided memory chunk.
These capability flags are not used anywhere else.
Restricting capabilities to flags is not generic and likely to
be insufficient to describe mempool driver features. If required
in the future, API which returns structured information may be
added.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Meson build currently tracks the dependencies between libraries, which
can often make things easier, but has the side-effect of slowing down
the initial meson run if too many duplicated dependencies are provided.
Therefore, we remove dependencies from the dpaa items where other
dependencies already depend on those. This provides a noticable speed-up
in meson configuration runs when lots of sample apps are included in the
build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
