The values for Rx and Tx copy break should be tunable rather
than hard coded constants.
The rx_copybreak sets the threshold where the driver uses an
external mbuf to avoid having to copy data. Setting 0 for copybreak
will cause driver to always create an external mbuf. Setting
a value greater than the MTU would prevent it from ever making
an external mbuf and always copy. The default value is 256 (bytes).
Likewise the tx_copybreak sets the threshold where the driver
aggregates multiple small packets into one request. If tx_copybreak
is 0 then each packet goes as a VMBus request (no copying).
If tx_copybreak is set larger than the MTU, then all packets smaller
than the chunk size of the VMBus send buffer will be copied; larger
packets always have to go as a single direct request. The default
value is 512 (bytes).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Long Li <longli@microsoft.com>
Adds support for merging a base steering rule with
all flow rules created on a VF.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In nicvf_qset_rbdr_alloc(), we allocate memory for the 'rbdr'
structure but not released when allocate 'rbdr desc ring' fails.
Fixes: 7413feee662d ("net/thunderx: add device start/stop and close")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The v2.2.0 adds support for network interface metrics, includes some bug
fixes and updates HAL to the latest version.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The ARMv8 platform support was tested and works fine with the ENA PMD.
It can be used on the AWS a1.* and m6g.* instances.
The ARMv8 support in ENA is at least from v19.11, where the VFIO DPDK
driver was fixed to work with 32-bit applications compiled for arm.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Latest generation HW requires IO completion queue descriptors to be
aligned to a 4K in order to achieve the best performance.
Because of that, the new allocation macros were added, which allows
driver to allocate the memory with specified alignment.
The previous allocation macros are now wrappers around the macros
doing the alignment, with the alignment value equal to cacheline size.
Fixes: b68309be44c0 ("net/ena/base: update communication layer for the ENAv2")
Cc: stable@dpdk.org
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
The ID 0xEC21 is not associated with LLQ feature of the device, so it
would be misleading for the user. Because of that, the current
identifier is more precise.
Together with code update, the documentation was changed to reflect
current changes
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The driver was never setting PKT_RX_*_CKSUM_GOOD flags, so the only way
of checking if the checksum was checked was by testing for the
PKT_RX_*_CKSUM_BAD. In that situation, the application couldn't detect
if the checksum was valid or unknown, as unknown flag is equal to 0.
Moreover, the l3_csum_err value is only valid if the l3_proto is
indicating IPv4, so it shouldn't be checked for other protocols.
Fixes: 1173fca25af9 ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
There was a bug in a code, which was reading stat_offset value from the
ena_stats_rx_strings array instead of ena_stats_global_strings.
It wasn't causing real problems just because ena_stats_rx_strings was
not smaller than ena_stats_global_strings and both arrays hold the same
offsets.
Fixes: 7830e905b7c9 ("net/ena: expose extended stats")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Several functions use sizeof(struct rte_flow_item_eth) and
sizeof(struct rte_flow_item_ipv6) when copying headers. These sizes
used to coincide with the sizes of rte_ether_hdr and
rte_ipv6_hdr. But, with recently added fields, rte_flow_item_eth and
rte_flow_item_ipv6 have grown in size. Use sizeof(rte_ether_hdr) and
sizeof(rte_ipv6_hdr) instead.
Coverity issue: 363572, 363573
Fixes: ea7768b5bba8 ("net/enic: add flow implementation based on Flow Manager API")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The ARM SVE vector implementation defined macro is
__ARM_FEATURE_SVE and RTE_MACHINE_CPUFLAG macros
have replaced by regular compiler macros.
Besides, we remove the unused macro RTE_LIBRTE_HNS3_INC_VECTOR_SVE.
Fixes: 952ebacce4f2 ("net/hns3: support SVE Rx")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently hns3vf_reinit_dev only judge whether the return value of
setting PCI bus function is not 0, while it will return a negative
value when execute failed.
Fixes: 243651cb6c8c ("net/hns3: check PCI config space reads")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently, the rx HW ring is not cleared after queue stop.
When there are packets remaining in the HW rings and the
queues have been stopped, if upper layer user calls the
rx_burst function at this time, an illegal memory access
will occur due to the sw rings has been released.
This patch fix this by reset the sw ring after disable the
queue.
Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently, u8 type variable is used to control to release fake queues in
hns3_fake_rx/tx_queue_config function. Although there is no case in
which more than 256 fake queues are created in hns3 network engine, it
is unreasonable to compare u8 variable with u16 variable.
Fixes: a951c1ed3ab5 ("net/hns3: support different numbers of Rx and Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
There are coverity defects related "calling
hns3_reset_all_tqps without checking return value
in hns3_do_start".
This patch fixes the warning by add "void" declaration
because here is exception handling, hns3_reset_all_tqps
will have the corresponding error message if it is
handled incorrectly, so it is not necessary to check
hns3_reset_all_tqps return value, here keep ret as the
error code causing the exception.
Coverity issue: 363048
Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently, hns3 supports recognizing a lot of ptypes, but most
tunnel packet types are not reported to the API
rte_eth_dev_get_supported_ptypes.
And there are some errors in L2 and L3 packet recognition. The
ARP and LLDP are classified to L3 field in RX descriptor. So,
the ptype of LLDP and ARP packets will be set twice. And ptypes
are assigned by bitwise OR, which will eventually cause the ptype
result to be incorrect.
Besides, when a packet with only L2 header, its ptype will not
report by hns3 PMD. This is because the L2/L3 ptype table is not
initialized properly. In this case, the table query result is 0
by default.
As a result, it fixes missing supported ptypes and the mistake in
L2/L3 packet recognition and the unreported L2 packet ptype by
reporting its L2 type when the L3 type unrecognized..
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently, driver uses the maximum number of queues configured by user
as the maximum queue id that can be specified by the RSS rule or the
reta_update api. It is unreasonable and may trigger an incorrect
behavior in the multi-TC scenario. The driver must ensure that the queue
id configured in the redirection table must be within the range of the
number of queues allocated to a TC.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Implement the available and used rxd number count function.
In Kunpeng series, the NIC hardware supports to read the bd numbers
which wait processed from the hardware FBD (Full Buffer Descriptor),
and the driver maintains the bd number to be written back hardware.
Compare the number of FBDs with the number of BDs to be written back to
the hardware.
The number of used descriptors of a rx queue is computed as follows:
The fbd numbers of reading from FBD register plus the bd numbers to be
written back to hardware maintained by the driver.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Enable metadata extraction for flexible descriptors in AVF, that would
allow network function directly get metadata without additional parsing
which would reduce the CPU cost for VFs. The enabling metadata
extractions involve the metadata of VLAN/IPv4/IPv6/IPv6-FLOW/TCP/MPLS
flexible descriptors, and the VF could negotiate the capability of
the flexible descriptor with PF and correspondingly configure the
specific offload at receiving queues.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Rename the dynamic mbuf name to 'intel_pmd_xxx' format, so that the
Intel PMD which has the protocol extraction feature will share the
same dynamic field/flags space in mbuf.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The file "rte_pmd_mlx5.h" is used to provide mlx5 PMD specific APIs
and it needs to be included in the document generation.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The multiplication of two u32 integers may cause an overflow with large
mempool sizes.
Fixes: 74b46340e2d4 ("net/af_xdp: support shared UMEM")
Signed-off-by: Martin Weiser <martin.weiser@allegro-packets.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the current implementation of eCPRI flow item parsing of the CLI,
the token items in the list are not connected properly.
A command containing "rtc_ctrl rtc_id spec 14857 rtc_id mask 0xff00"
will be considered invalid. In order to support spec with mask, the
common entry needs to be typed twice and the whole command will be
too long.
By changing the token lists, it could support spec with mask without
backing from the entry of the item.
Fixes: 17d103cc9365 ("app/testpmd: add eCPRI in flow creation patterns")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Updated description of rte_eth_rx_burst() to reflect what drivers,
when using vector instructions, expect from nb_pkts.
Also discussed on the mailing list here:
http://inbox.dpdk.org/dev/98CBD80474FA8B44BF855DF32C47DC35C61257@smartserver.smartshare.dk/
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Intel SSE has __m128i, but ARMv8 has __uint128_t. So, add compat
efsys_uint128_t to be used in driver source and have either __u128i
or __uint128_t behind.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For Kunpeng930 NIC hardware, it supports to use dst/src port to
RSS hash for ipv6-sctp packet type. However, the Kunpeng920 NIC
hardware is different with it. The Kunpeng920 NIC only supports
dst/src ip to RSS hash for ipv6-sctp packet type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
I am a new hns3 pmd developer and reviewer for upstreaming hns3
pmd driver. So I want to help out here as well.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
net/ixgbe driver is the only user of the struct rte_eth_l2_tunnel_conf.
Move it to the driver and use ixgbe_ prefix instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The command uses FDIR filter information get API which
is not supported any more.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Global filter configuration request was supported by net/i40e
driver only to configure GRE key length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of L2 tunnel filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_L2_TUNNEL since it is used in drivers
internally in RTE flow API support.
rte_eth_l2_tunnel_conf structure is used in other ethdev API
functions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of HASH filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_HASH since it is used in drivers
internally in RTE flow API support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/e1000 driver is the only user of the struct rte_eth_flex_filter
and helper defines. Move it to the driver and use igb_ prefix
instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FLEXIBLE filter RTE flow API should be used.
Temporarily preserve helper defines in public interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/i40e driver is the only user of the enum rte_mac_filter_type.
Move the define to the driver and use i40e_ prefix instead of rte_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of MACVLAN filter RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If a device probe fails, the alarm is canceled and will no longer work
for previously probed devices.
Fix this by checking if alarm is necessary at the end of each device
probe. Reset the alarm if there are vdev_netvsc_ctx created.
Fixes: e7dc5d7becc5 ("net/vdev_netvsc: implement core functionality")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Replace the 'rte_panic()' with an error return.
Also change the type of the calling function.
Fixes: a6712cd029a4 ("net/txgbe: add PF module init and uninit for SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
If set TIS lag port affinity to auto, firmware assign port affinity on
each creation with Round Robin. In case of 2 PFs, if create virtq,
destroy and create again, then each virtq will get same port affinity.
To resolve this fw limitation, this patch sets create TIS with specified
affinity for each PF.
Fixes: bff735011078 ("vdpa/mlx5: prepare virtio queues")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
