Several source files include Verbs header files as in (1). These source
files will not compile under non-Linux operating systems. This commit
removes this inclusion in two cases:
Case 1: There is no usage of ibv_* or mlx5dv_* symbols in the source
file so the inclusion in (1) can be safely removed.
Case 2: Verbs symbols are used. Please note the inclusion in (1) already
appears in file linux/mlx5_glue.h (which represents the interface
to the rdma-core library). Therefore, replace (1) in the source file
with (2). Under non-Linux operating systems - file mlx5_glue.h will not
include (1).
(1)
#include <infiniband/verbs.h>
#include <infiniband/mlx5dv.h>
(2)
#include <mlx5_glue.h>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
1. The shared data communication between the primary and the secondary
processes is implemented using Linux API. Move the Linux API code under
linux directory (file linux/mlx5_os.c).
2. File net/mlx5/mlx5_mp.c handles requests to the primary and secondary
processes (e.g. start_rxtx, stop_rxtx). It is Linux based so it is moved
under linux (new file linux/mlx5_mp_os.c).
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The cleanup refers to header file mlx5.h.
1. Remove unused prototypes.
2. Move prototypes under their correct title.
3. Change functions to static and remove their prototye from the header
file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit eliminates Linux dependencies in shared file mlx5.h.
1. All functions using 'struct ifreq' are moved to file
linux/mlx5_ethdev_os.c such that this struct can be removed from mlx5.h.
2. Function mlx5_set_flags() that uses Linux flags (e.g. IFF_UP) is
changed to static and its prototype is removed from mlx5.h.
3. Remove redundant member verbs_action from 'struct mlx5_priv'.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit adds Linux implementation of routines mlx5_os_set_promisc()
and mlx5_os_set_promisc(). The routines call netlink APIs.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move OS specific MAC operations add, remove, modify VF into file
linux/mlx5_os.c.
Remove unused function mlx5_get_mac().
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The following Linux calls are replaced by their matching rte APIs.
mmap ==> rte_mem_map()
munmap == >rte_mem_unmap()
sysconf(_SC_PAGESIZE) ==> rte_mem_page_size()
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Function calls mlx5_flow_adjust_priority() and
mlx5_flow_discover_priorities() are Verbs based. Move them from file
mlx5_flow.c to file mlx5_flow_verbs.c
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are some limitations on some NICs (at least on ConnectX-6 Dx
and BlueField 2) with supporting FCS (frame checksum) scattering for
the tunnel decapsulated packets.
For the case only one of the features can be supported in the same time,
and the new devarg "decap_en" is introduced to provide the choice to the
users.
If FCS scattering feature is not supposed to be engaged by application,
this new devarg should be specified as "decap_en=0", forcing the FCS
feature enable and rejecting tunnel decap actions in the rte_flow engine.
If FCS scatter is not needed and application supposes to use tunnel
decapsulation in rte_flow, the devarg can be omitted or set to non-zero
value (this is default settings).
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As scatter FCS might be not supported for decapsulated tunnel
packets in some NIC HW, a new capability bit which indicates
if scatter FCS works with decap is added.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit allocates the miscellaneous configuration objects from the
unified malloc function.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit allocates the data path object page and B-tree table memory
from unified malloc function with explicit flag MLX5_MEM_RTE.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit allocates the control path objects memory from the unified
malloc function.
These objects are all used during the instances initialize, it will not
affect the data path.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, for MLX5 PMD, once millions of flows created, the memory
consumption of the flows are also very huge. For the system with limited
memory, it means the system need to reserve most of the memory as huge
page memory to serve the flows in advance. And other normal applications
will have no chance to use this reserved memory any more. While most of
the time, the system will not have lots of flows, the reserved huge
page memory becomes a bit waste of memory at most of the time.
By the new sys_mem_en devarg, once set it to be true, it allows the PMD
allocate the memory from system by default with the new add mlx5 memory
management functions. Only once the MLX5_MEM_RTE flag is set, the memory
will be allocate from rte, otherwise, it allocates memory from system.
So in this case, the system with limited memory no need to reserve most
of the memory for hugepage. Only some needed memory for datapath objects
will be enough to allocated with explicitly flag. Other memory will be
allocated from system. For system with enough memory, no need to care
about the devarg, the memory will always be from rte hugepage.
One restriction is that for DPDK application with multiple PCI devices,
if the sys_mem_en devargs are different between the devices, the
sys_mem_en only gets the value from the first device devargs, and print
out a message to warn that.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add the internal mlx5 memory management functions:
mlx5_malloc_mem_select();
mlx5_memory_stat_dump();
mlx5_rellaocate();
mlx5_malloc();
mlx5_free();
User will be allowed to manage memory from system or from rte memory
with the unified functions.
In this case, for the system with limited memory which can not reserve
lots of rte hugepage memory in advanced, will allocate the memory from
system for some of not so important control path objects based on the
sys_mem_en configuration.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Update the release notes of mlx5 PMD part by adding the
support of eCPRI.
Update the firmware configuration in the mlx5 NIC guide to support
the usage of eCPRI.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
If the NIC or the FW does not support the dynamic flex parser,
it will return error when trying to create the parser for eCRPI.
Then it is hard to know the detail error reason of the failure.
Before creating the parser node and the following usage of the
parser, the capacity bit saved in the HCA_CAP could be used to
confirm if the dynamic flex parser is supported.
If no, an error will be returned directly with ENOTSUP to prevent
the following steps to be executed.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
eCPRI protocol has unified format layout for the variants, over
ETH layer (including .1Q) and UDP layer.
The common header of the message has 4 bytes fixed length, and the
message payload layers are different based on the type field. Now
only type #0, #2 and #5 will be supported, and 2 bytes are needed.
When creating the flex parser, the header will be extended to 8
bytes and 2 DW samples are needed. The 1st DW starts from offset 0
and will be used for the type field of the common header. The 2nd
DW starts from offset 4 and will be used for the physical channel
ID, real-time control ID or measurement ID fields.
The parser will be created once a flow with eCPRI item is observed
for the first time. After creating, it will remain in the system
and HW until the device is stopped. Right now, there is no need to
destroy the eCPRI flex parser after the last flow with eCPRI item
is destroyed. This is to get rid of the alternate states of creating
and destroying eCPRI flex parser with a single eCPRI flow.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In order to use dynamic flex parser to parse protocols that is not
supported natively, two steps are needed.
Firstly, creating the parse graph node. There are three parts of the
flex parser: node, arc and sample. Node is the whole structure of a
flex parser, when creating, the length of the protocol should be
specified. Then the input arc(s) is(are) mandatory, it will tell the
HW when to use this parser to parse the packet. For a single parser
node, up to 8 input arcs could be supported and it gives SW ability
to support this protocol over multiple layers. The output arc is
optional and also up to 8 arcs could be supported. If the protocol
is the last header of the stack, then output arc should be NULL. Or
else it should be specified. The protocol type in the arc is used to
indicate the parser pointing to or from this flex parser node. For
output arc, the next header type field offset and size should be set
in the node structure, then the HW could get the proper type of the
next header and decide which parser to point to.
Note: the parsers have two types now, native parser and flex parser.
The arc between two flex parsers are not supported in this stage.
Secondly, querying the sample IDs. If the protocol header parsed
with flex parser needs to used in flow rule offloading, the DW
samples are needed when creating the parse graph node. The offset
of bytes starting from the header needs to be set. After creating
the node successfully, a general object handle will be returned.
This object could be queried with Devx command to get the sample
IDs.
When creating a flow, sample IDs could be used to sample a DW from
the parsed header - 4 continuous bytes starting from the offset. The
flow entry could specify some mask to use part of this DW for
matching. Up to 8 samples could be supported for a single parse
graph node. The offset should not exceed the header length.
The HW resources have some limitation, low layer driver error should
be checked once there is a failure of creating parse graph node.
Signed-off-by: Netanel Gonen <netanelg@mellanox.com>
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The structures and other definitions will be used for the dynamic
flex parser creation via Devx command interface. These structures
will be used as some some intermediate variables and input
parameters for the parser creation API.
It is better to keep all members consistent with the PRM definition
even though some of them will not be used.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the translation stage, the eCPRI item should be translated into
the format that lower layer driver could use. All the fields that
need to match must be in network byte order after translation, as
well as the mask. Since the header in the item belongs to the network
layers stack, and the input parameter of the header is considered to
be in big-endian format already.
Base on the definition in the PRM, the DW samples will be used for
matching in the FTE/STE. Now, the type field and only the PC ID, RTC
ID, and DLY MSR ID of the payload will be supported. The masks should
be 00 ff 00 00 ff ff(00) 00 00 in the network order. Two DWs are
needed to support such matching. The mask fields could be zeros to
support some wildcard rules. But it makes no sense to support the
rule matching only on the payload but without matching type field.
The DW samples should be stored after the flex parser creation for
eCPRI. There is no need to query the sample IDs each time when
creating a flow rule with eCPRI item. It will not introduce
insertion rate degradation significantly.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When creating a flow with eCPRI header item, the validation of it is
mandatory. The detailed limitations are listed below:
1. Over Ether / VLAN, ethertype must be 0xAEFE.
2. No tunnel support is described in the specification now.
3. L3 layer is only supported when L4 is UDP, see #4.
4. Over TCP is not supported from the specification, and over UDP
is not supported right now.
5. Concatenation indicator matching is not supported now.
6. No need to check the revision.
7. Only type field in the common header is mandatory, and one byte
should be matched integrally.
8. Fields in the message payload header are optional.
9. Only messages with type #0, #2 and #5 are supported now.
Some limitations are only from software right now, because there is
no need to support all the message types and variants of protocol
stack listed in the specification.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The ConnectX-6DX supports the timestamps in various formats,
the new realtime format is introduced - the upper 32-bit word
of timestamp contains the UTC seconds and the lower 32-bit word
contains the nanoseconds. This patch detects what format is
configured in the NIC and performs the conversion accordingly.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The DevX routine to read/write NIC registers via DevX API is added.
This is the preparation step to check timestamp modes and units
and gather the extended statistics.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5 PMD exposes the following new introduced
extended statistics counter to report the errors
of packet send scheduling on timestamps:
- txpp_err_miss_int - rearm queue interrupt was not handled
was not handled in time and service routine might miss
the completions
- txpp_err_rearm_queue - reports errors in rearm queue
- txpp_err_clock_queue - reports errors in clock queue
- txpp_err_ts_past - timestamps in the packet being sent
were found in the past, timestamps were ignored
- txpp_err_ts_future - timestamps in the packet being sent
were found in the too distant future (beyond HW/clock queue
capabilities to schedule, typically it is about 16M of
tx_pp devarg periods)
- txpp_jitter - estimated jitter in device clocks between
8K completions of Clock Queue.
- txpp_wander - estimated wander in device clocks between
16M completions of Clock Queue.
- txpp_sync_lost - error flag, the Clock Queue completions
synchronization is lost, accurate packet scheduling can
not be handled, timestamps are being ignored, the restart
of all ports using scheduling must be performed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
If send schedule feature is engaged there is the Clock Queue
created, that reports reliable the current device clock counter
value. The device clock counter can be read directly from the
Clock Queue CQE.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds send scheduling on timestamps into tx_burst
routine template. The feature is controlled by static configuration
flag, the actual routines supporting the new feature are generated
over this updated template.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new static control flag is introduced to control
routine generating from template, enabling the scheduling
on timestamps.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The application provides timestamps in Tx mbuf as clocks,
the hardware performs scheduling on Clock Queue completion index
match. This patch introduces the timestamp-to-completion-index
inline routine.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The fields to support send scheduling on dynamic timestamp
field are introduced and initialized on device start.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Service routine is invoked periodically on Rearm Queue
completion interrupts, typically once per some milliseconds
(1-16) to track clock jitter and wander in robust fashion.
It performs the following:
- fetches the completed CQEs for Rearm Queue
- restarts Rearm Queue on errors
- pushes new requests to Rearm Queue to make it
continuously running and pushing cross-channel requests
to Clock Queue
- reads and caches the Clock Queue CQE to be used in datapath
- gathers statistics to estimate clock jitter and wander
- gathers Clock Queue errors statistics
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch allocates the Packet Pacing context from the kernel,
configures one according to requested pace send scheduling
granularity and assigns to Clock Queue.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
To provide the packet send schedule on mbuf timestamp the Tx
queue must be attached to the same UAR as Clock Queue is.
UAR is special hardware related resource mapped to the host
memory and provides doorbell registers, the assigning UAR
to the queue being created is provided via DevX API only.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The dedicated Rearm Queue is needed to fire the work requests to
the Clock Queue in realtime. The Clock Queue should never stop,
otherwise the clock synchronization might be broken and packet
send scheduling would fail. The Rearm Queue uses cross channel
SEND_EN/WAIT operations to provides the requests to the
Clock Queue in robust way.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch creates the special completion queue providing
reference completions to schedule packet send from
other transmitting queues.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step before moving the Tx queue creation
to the DevX approach. Some features require the shared UAR
for Tx queues and scheduling completion queues, the patch
manages the shared UAR.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The master and representors might be created over the multiport
Infiniband devices and the UAR resource allocated for sibling
ports might belong to the same underlying Infiniband device.
Hardware requires the write access to the UAR must be performed
as atomic 64-bit write, on 32-bit systems this is two sequential
writes, protected by lock. Due to possibility to share the same
UAR between sibling devices the locks must be moved to shared
context.
Fixes: f048f3d479 ("net/mlx5: switch to the shared IB device context")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the new devargs:
tx_pp - enables accurate packet send scheduling on mbuf timestamps
in the PMD. On the device start if "rte_dynflag_timestamp"
dynamic flag is registered and this devarg non-zero value is
specified, the driver initializes all necessary internal
infrastructure to provide packet scheduling. The parameter
value specifies scheduling granularity in nanoseconds.
tx_skew - the parameter adjusts the send packet scheduling on
timestamps and represents the average delay between beginning
of the transmitting descriptor processing by the hardware and
appearance of actual packet data on the wire. The value should
be provided in nanoseconds and is valid only if tx_pp parameter
is specified. The default value is zero.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch prepares the common part of the mlx5 PMDs to
support packet send scheduling on mbuf timestamps:
- the DevX routine to query the packet pacing HCA capabilities
- packet pacing Send Queue attributes support
- the hardware related definitions
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In case the ibverbs glue is a separate library to dlopen,
the PMD library must allocate a glue structure to be filled by dlopen.
The glue management was in mlx5_common.c and moved to mlx5_common_os.c,
but the variable allocation was not removed from the original file.
The consequence was a link failure, if ibverbs dlopen option is enabled,
because of the redefinition of the variable (with GCC 10):
multiple definition of 'mlx5_glue'
The original definition is removed to keep only the one moved
in the Linux sub-directory.
Fixes: 79aa430721 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
As tx mbuf is not set for some advanced descriptors, if there is no
mbuf checking before rte_pktmbuf_free_seg() function be called on
the process of tx done clean up, that will cause a segfault. So add
a NULL pointer check to fix it.
Bugzilla ID: 501
Fixes: 8d907d2b79 ("net/igb: free consumed Tx buffers on demand")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
When the configure pattern involve GTPU inner l3 and l4, even the
configure input set only l3 but not l4, the different l4 protocol
header should also be configured for the different l4 protocol.
Fixes: 215a247b5f ("net/iavf: refactor hash flow")
Fixes: 642f201950 ("net/iavf: support RSS for IPv4 IPv6 mix of GTP")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the configure pattern involve GTPU inner l3 and l4, even the
configure input set only l3 but not l4, the different l4 protocol
header should also be configured for the different l4 protocol.
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Fixes: de32fa2ba2 ("net/ice: support RSS for IPv6 prefix")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some protocol don't support symmetric hash, need to handle these cases.
When set an invalid symmetric hash rule, just return failed.
Fixes: 4eafe71ee9 ("net/ice: fix RSS type")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_eth_dev_set_vlan_offload function will check vlan rx offload
capability, the i350/i210/i211 nics have vlan extend feature but
DEV_RX_OFFLOAD_VLAN_EXTEND is not set into the capability, that will
cause setting fail. So need to add this capability in
igb_get_rx_port_offloads_capa function.
Fixes: ef990fb56e ("net/e1000: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The rte_eth_dev_set_vlan_offload function will check vlan rx offload
capability, the i40e vf has vlan filter feature but
DEV_RX_OFFLOAD_VLAN_FILTER is not set into the capability, that will
cause setting fail. So need to add this capability in
i40e_vf_representor_dev_infos_get function.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
