Split stats from debug, to make mempool statistics available without the
performance cost of continuously validating the debug cookies in the
mempool elements.
mempool_perf_autotest shows the following improvements in rate_persec.
The cost of enabling mempool debug without this patch:
-28.1 % and -74.0 %, respectively without and with cache.
The cost of enabling mempool stats (without debug) after this patch:
-5.8 % and -21.2 %, respectively without and with cache.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Added changes to enable CMAN (RED or PIE) at init
from profile configuration file.
By default CMAN code is enabled but not in use, when
there is no RED or PIE profile configured.
Signed-off-by: Marcin Danilewicz <marcinx.danilewicz@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Rather than explicitly clearing any setting of undefined values in our
rte_config.h file, it's better to instead just add a comment that the
value is not set. Using a comment allows the user to set the value using
CFLAGS or similar mechanism without the config file clearing the value
again.
The text used "<VALUE> is not set" is modelled after the kernel approach
of doing the same thing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Removed RTE_SCHED_SUBPORT_TC_OV from rte_config.h.
Best effort traffic class oversubscription is always enabled.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Grinder configuration is now moved to sched library.
Number of grinders can also modified by specifying
RTE_SCHED_PORT_N_GRINDERS=N in CFLAGS, where N is number of grinders.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Remove RTE_SCHED_VECTOR flag from rte_config.h.
This flag is no longer useful. Only scalar version is supported.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The Kni kthreads seem to be re-scheduled at a granularity of roughly
1 millisecond right now, which seems to be insufficient for performing
tests involving a lot of control plane traffic.
Even if KNI_KTHREAD_RESCHEDULE_INTERVAL is set to 5 microseconds, it
seems that the existing code cannot reschedule at the desired granularily,
due to precision constraints of schedule_timeout_interruptible().
In our use case, we leverage the Linux Kernel for control plane, and
it is not uncommon to have 60K - 100K pps for some signaling protocols.
Since we are not in atomic context, the usleep_range() function seems to be
more appropriate for being able to introduce smaller controlled delays,
in the range of 5-10 microseconds. Upon reading the existing code, it would
seem that this was the original intent. Adding sub-millisecond delays,
seems unfeasible with a call to schedule_timeout_interruptible().
KNI_KTHREAD_RESCHEDULE_INTERVAL 5 /* us */
schedule_timeout_interruptible(
usecs_to_jiffies(KNI_KTHREAD_RESCHEDULE_INTERVAL));
Below, we attempted a brief comparison between the existing implementation,
which uses schedule_timeout_interruptible() and usleep_range().
We attempt to measure the CPU usage, and RTT between two Kni interfaces,
which are created on top of vmxnet3 adapters, connected by a vSwitch.
insmod rte_kni.ko kthread_mode=single carrier=on
schedule_timeout_interruptible(usecs_to_jiffies(5))
kni_single CPU Usage: 2-4 %
[root@localhost ~]# ping 1.1.1.2 -I eth1
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 eth1: 56(84) bytes of data.
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=2.70 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=1.00 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=1.99 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.985 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=1.00 ms
usleep_range(5, 10)
kni_single CPU usage: 50%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.338 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.150 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.123 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.139 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.159 ms
usleep_range(20, 50)
kni_single CPU usage: 24%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.202 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.170 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.171 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.248 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.185 ms
usleep_range(50, 100)
kni_single CPU usage: 13%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.537 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.257 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.231 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.143 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.200 ms
usleep_range(100, 200)
kni_single CPU usage: 7%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.716 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.167 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.459 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.455 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.252 ms
usleep_range(1000, 1100)
kni_single CPU usage: 2%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=2.22 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=1.15 ms
Upon testing, usleep_range(1000, 1100) seems roughly equivalent in
latency and cpu usage to the variant with schedule_timeout_interruptible(),
while usleep_range(100, 200) seems to give a decent tradeoff between
latency and cpu usage, while allowing users to tweak the limits for
improved precision if they have such use cases.
Disabling RTE_KNI_PREEMPT_DEFAULT, interestingly seems to lead to a
softlockup on my kernel.
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 1226 Comm: kni_single Tainted: G W O 3.10 #1
<IRQ> [<ffffffff814f84de>] dump_stack+0x19/0x1b
[<ffffffff814f7891>] panic+0xcd/0x1e0
[<ffffffff810993b0>] watchdog_timer_fn+0x160/0x160
[<ffffffff810644b2>] __run_hrtimer.isra.4+0x42/0xd0
[<ffffffff81064b57>] hrtimer_interrupt+0xe7/0x1f0
[<ffffffff8102cd57>] smp_apic_timer_interrupt+0x67/0xa0
[<ffffffff8150321d>] apic_timer_interrupt+0x6d/0x80
This patch also attempts to remove this option.
References:
[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Padraig Connolly <Padraig.J.Connolly@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Increase default value for config parameter RTE_LIBRTE_IP_FRAG_MAX_FRAG
from 4 to 8. This parameter controls maximum number of fragments per
packet in ip reassembly table. Increasing this value from 4 to 8 will
allow users to cover common case with jumbo packet size of 9KB and
fragments with default frame size (1500B).
As RTE_LIBRTE_IP_FRAG_MAX_FRAG is used in definition of public
structure (struct rte_ip_frag_death_row), this is an ABI change.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
RTE_MBUF_REFCNT_ATOMIC = 0 is not necessary for applications like
Seastar, where it's safe to assume that the mbuf refcnt is only
updated by a single core only.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Allocate max space for internal port, port config, queue config and
link map arrays.
Introduce new macro RTE_EVENT_MAX_PORTS_PER_DEV and set it to max
possible value.
This simplifies the port and queue reconfigure scenarios and will
also allow inline functions to refer pointer to internal port data
without extra checking of current number of configured queues.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The new devarg names and their default values
are listed below. The defaults have not changed, and
none of these parameters are accessed in the fast path.
poll_interval=1000
sw_credit_quantai=32
default_depth_thresh=256
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Remove event/dlb driver from DPDK code base.
Updated release note's removal section to reflect the same.
Also updated doc/guides/rel_notes/release_20_11.rst to fix the
the missing link issue due to removal of doc/guides/eventdevs/dlb.rst
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The NIC can have multiple PCIe links and can be attached to the multiple
hosts, for example the same single NIC can be shared for multiple server
units in the rack. On each PCIe link NIC can provide multiple PFs and
VFs/SFs based on these ones. To provide the unambiguous identification
of the PCIe function the controller index is added. The full representor
identifier consists of three indices - controller index, PF index, and
VF or SF index (if any).
This patch introduces controller index to ethdev representor syntax,
examples:
[[c#]pf#]vf#: VF port representor/s, example: pf0vf1
[[c#]pf#]sf#: SF port representor/s, example: c1pf1sf[0-3]
c# is controller(host) ID/range in case of multi-host, optional.
For user application (e.g. OVS), PMD is responsible to interpret and
locate representor device based on controller ID, PF ID and VF/SF ID in
representor syntax.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove all compatibility build
defines from previous make/meson versions and use only the standardized
ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds APIs to add/remove callback functions on crypto
enqueue/dequeue burst. The callback function will be called for
each burst of crypto ops received/sent on a given crypto device
queue pair.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
With Make build system, RTE_PMD_PACKET_PREFETCH was enabled
by default. It got lost when transitioning to Meson build
system.
In order to avoid performance changes, this patch enables
packet prefetching in rte_config.h.
Fixes: 9314afb68a ("drivers: add infrastructure for meson build")
Cc: stable@dpdk.org
Reported-by: Marvin Liu <yong.liu@intel.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Note that config/rte_config.h contains several configuration
switches, providing for fine control of the PMD's
runtime behaviour.
The meson infrastructure is expanded as additional files are
added to this patchset.
Adds announcement of availability of the new driver
for Intel Dynamic Load Balancer 1.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Adds the meson build infrastructure, which includes
compile-time constants in rte_config.h. DLB2 is
only supported on Linux 64 bit X86 platforms at this time.
Adds announcement of availability for the new driver
for Intel Dynamic Load Balancer 2.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
DLB supports a total of 256 queues, 128 load balanced queues
and 128 directed queues. Increase RTE_EVENT_MAX_QUEUES_PER_DEV
to max possible uint_8_t max value.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When building kernel modules such as kni, the "config" directory is not
passed as a standard path in the EXTRA_CFLAGS value, meaning that the
rte_compatibility_defines.h is not found from rte_config.h. However, since
both headers are in the same directory, we can just use quotes rather than
angle-brackets to ensure the second header is always found if the first is.
Fixes: b0b672aead ("build: add defines for compatibility with make build")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The defines used to indicate what crypto, compression and eventdev drivers
were being built were different to those used in the make build, with meson
defining them with "_PMD" at the end, while make defined them with "_PMD"
in the middle and the specific driver name at the end. This might cause
compatibility issues for applications which used the older defines, which
switching to build against new DPDK releases.
As well as changing the default to match that of make, meson also
special-cases the crypto/compression/event drivers to have both defines
provided. This ensures compatibility for these macros with both meson and
make from older versions.
For a selection of other libraries and drivers, there were other
incompatibilities between the meson and make-defined macros which were not
previously highlighted in a deprecation notice, so we add per-macro
compatibility defines for these to ease the transition from make to meson.
Fixes: 5b9656b157 ("lib: build with meson")
Fixes: 9314afb68a ("drivers: add infrastructure for meson build")
Fixes: dcadbbde8e ("crypto/null: build with meson")
Fixes: 3c32e89f68 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes: eca504f318 ("drivers/event: build skeleton and SW drivers with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Queue stats will be removed from basic stats to xstats.
It will be PMDs responsibility to fill queue stats based on number of
queues they have.
Until all PMDs implement the xstats, a temporary
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' device flag created. PMDs switched
to the xstats should clear this flag to bypass the ethdev layer autofill
for queue stats.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The maximum number of queues for hns3 PF and VF driver is 64 based on
hns3 network engine with revision_id equals 0x21. Based on hns3 network
engine with revision_id equals 0x30, the hns3 PF PMD driver can support
up to 1280 queues, and hns3 VF PMD driver can support up to 128 queues.
The following points need to be modified to support maximizing queue
number and maintain better compatibility:
1) Maximizing the number of queues for hns3 PF and VF PMD driver In
current version, VF is not supported when PF is driven by hns3 PMD
driver. If maximum queue numbers allocated to PF PMD driver is less
than total tqps_num allocated to this port, all remaining number of
queues are mapped to VF function, which is unreasonable. So we fix
that all remaining number of queues are mapped to PF function.
Using RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF which comes from
configuration file to limit the queue number allocated to PF device
based on hns3 network engine with revision_id greater than 0x30. And
PF device still keep the maximum 64 queues based on hns3 network
engine with revision_id equals 0x21.
Remove restriction of the macro HNS3_MAX_TQP_NUM_PER_FUNC on the
maximum number of queues in hns3 VF PMD driver and use the value
allocated by hns3 PF kernel netdev driver.
2) According to the queue number allocated to PF device, a variable
array for Rx and Tx queue is dynamically allocated to record the
statistics of Rx and Tx queues during the .dev_init ops
implementation function.
3) Add an extended field in hns3_pf_res_cmd to support the case that
numbers of queue are greater than 1024.
4) Use new base address of Rx or Tx queue if QUEUE_ID of Rx or Tx queue
is greater than 1024.
5) Remove queue id mask and use all bits of actual queue_id as the
queue_id to configure hardware.
6) Currently, 0~9 bits of qset_id in hns3_nq_to_qs_link_cmd used to
record actual qset id and 10 bit as VLD bit are configured to
hardware. So we also need to use 11~15 bits when actual qset_id is
greater than 1024.
7) The number of queue sets based on different network engine are
different. We use it to calculate group number and configure to
hardware in the backpressure configuration.
8) Adding check operations for number of Rx and Tx queue user configured
when mapping queue to tc Rx queue numbers under a single TC must be
less than rss_size_max supported by a single TC. Rx and Tx queue
numbers are allocated to every TC by average. So Rx and Tx queue
numbers must be an integer multiple of 2, or redundant queues are not
available.
9) We can specify which packets enter the queue with a specific queue
number, when creating flow table rules by rte_flow API. Currently,
driver uses 0~9 bits to record the queue_id. So it is necessary to
extend one bit field to record queue_id and configure to hardware, if
the queue_id is greater than 1024.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This commit introduce the API that is needed by the RegEx devices in
order to work with the RegEX lib.
During the probe of a RegEx device, the device should configure itself,
and allocate the resources it requires.
On completion of the device init, it should call the
rte_regex_dev_register in order to register itself as a RegEx device.
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Guy Kaneti <guyk@marvell.com>
When building with meson, the default size of virtual address space
reserved for mapping pages was globally set at 512GB, which is too big for
use in 32-bit processes. To match the behaviour with "make", we configure
this to be 512GB for 64-bit and 2GB for 32-bit builds.
Bugzilla ID: 498
Fixes: 66cc45e293 ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
The current value is 10, which is not sufficient for many use-cases.
e.g. NXP LX2 with raw qdma devices can use 32-48 raw devices in some
use-cases. So, making it to 64 to cover various cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since we have the version number in a separate file at the root level,
we should not need to duplicate this in rte_version.h too. Best
approach here is to move the macros for specifying the year/month/etc.
parts from the version header file to the build config file - leaving
the other utility macros for e.g. printing the version string, where they
are.
For "make", this is done by having a little bit of awk parse the version
file and pass the results through to the preprocessor for the config
generation stage.
For "meson", this is done by parsing the version and adding it to the
standard dpdk_conf object.
In both cases, we need to append a large number - in this case "99",
previously 16 in original code - to the version number when we want to do
version number comparisons. Without this, the release version e.g. 19.05.0
will compare as less than it's RC's e.g. 19.05.0-rc4. With it, the
comparison is correct as "19.05.0.99 > 19.05.0-rc4.99".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Allow users and packagers to override the default RTE_MAX_ETHPORTS.
This adds a new meson option, max_ethports which defaults to the
current value.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
FreeBSD compilation was failing through meson build.
RTE_EAL_VFIO is not supported in FreeBSD.
But RTE_EAL_VFIO was enabled for both linux and freebsd.
So RTE_EAL_VFIO is removed from config/rte_config.h and
based on the platform RTE_EAL_VFIO flag is enabled/disabled appropriately.
Fixes: 844514c735 ("eal: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch implements the Tx adapter APIs by invoking the
corresponding eventdev PMD callbacks and also provides
the common rte_service function based implementation when
the eventdev PMD support is absent.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
RTE_LIBRTE_I40E_ITR_INTERVAL is not used. So it should also be removed
in config/rte_config.h for meson+ninja build.
Fixes: 864a800d70 ("net/i40e: remove VF interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For meson builds, the define to enable the symbol version
macros in rte_compat.h was missing. This led to symbols being
omitted from shared objects. For example, checking rte_distributor.so
with objdump and comparing make and meson built versions:
$ objdump -T make-build/lib/librte_distributor.so | grep _flush
0000000000001b60 g DF .text 00000000000000a7 (DPDK_2.0) rte_distributor_flush
0000000000003f10 g DF .text 0000000000000434 DPDK_17.05 rte_distributor_flush
$ objdump -T meson-build/lib/librte_distributor.so | grep _flush
0000000000001d50 g DF .text 00000000000000fb DPDK_2.0 rte_distributor_flush
Adding in the missing define fixes this.
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
This patch adds Scatter-Gather List (SGL) feature to
QAT compression PMD.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Add support for interrupt driven queues when eth device is
configured for rxq interrupts and servicing weight for the
queue is configured to be zero.
A interrupt driven packet received counter has been added to
rte_event_eth_rx_adapter_stats.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Most crypto PMDs do not have a limitation
of the number of the sessions that can be handled
internally. The value that was set before was not
actually used at all, since the sessions are created
at the application level.
Therefore, this value is not parsed from the initial
crypto parameters anymore and it is set to 0,
meaning that there is no actual limit.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
This patch adds common code for the crypto adapter to support
SW and HW based transfer mechanisms. The adapter uses an EAL
service core function for SW based packet transfer and uses
the eventdev PMD functions to configure HW based packet
transfer between the crypto device and the event device.
This patch also adds adapter to the meson build system &
updates the necessary makefile & map file.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
