The i40e_add_pd_table_entry() routine is being modified to handle both
cases where a backing page is passed and where backing page is allocated
in i40e_add_pd_table_entry().
For pble resource management, it is more efficient for it to manage its
backing pages. For VF, pble backing page addresses will be send to PF
driver for pble resource.
The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and
free only ones which were allocated in i40e_add_pd_table_entry().
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The firmware has added additional status information to allow software
to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in
CEE DCBX mode.
This patch adds to support those additional checks and will only add
applications to the software table that have oper and sync bits set
without any error.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
In order to support some extra Solaris features the Solaris VF drivers need
additional configuration data from the PF that aren't provided with the current
virtual channel commands.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The struct i40e_aqc_get_cee_dcb_cfg_v1_resp was originally defined with
word boundary layout issues, which most compilers deal with by silently
adding padding, making the actual struct larger than designed.
This patch adds an extra byte in fields reserved3 and reserved4 to directly
acknowledge that padding.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The assignments of addr_high and addr_low were not only wrong because
they were assigning virtual addresses to a hardware accessed variable,
but they were shortly thereafter overwritten by the send_asq_command
call with a non-NULL third argument (buffer) with correctly formatted
data.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Use INLINE macro for better cross-platform code management.
Clean up some unnecessary logic jumping and drop a variable.
There was one more __FUNCTION__ reference that wasn't needed.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add the new Port link status bit and rename the link status to function
link status.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The change is to explicitly assign enum index for each VSI type
so that PF and VF always reference to the same VSI type even if the
enum lists are different.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This will help us avoid a whole bunch of log messages when the driver
is running.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The Flex10 device/function capability has been upgraded to revision 2
to include information needed to support Flex-10 DCC and DCI
configurations. This patch adds new fields to the i40e_hw_capabilities
structure and updates i40e_parse_discover_capabilities functions to
extract them from the AQ response. Naming convention has changed to use
flex10 mode instead of existing mfp_mode_1.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds capability to query and store the CEE DCBX DesiredCfg
and RemoteCfg data from the LLDP MIB.
Added new member "desired_dcbx_config" in the i40e_hw data structure
to hold CEE only DesiredCfg data.
Store the CEE TLV status returned by firmware to allow drivers to dump that
for debug purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Remove unused members in the PHY structure and add a new member to store
all the capabilities the PHY has as reported by the FW. This information will
help us determine what speeds the device is capable of when link is
down.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch prepares the LLDP MIB in IEEE TLV format based on
the local dcb config.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB.
While the driver gets the DCB CEE operational configuration from Firmware
using the "Get CEE DCBX Oper Config" AQ command there is a need to get
the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for
debug and other application purposes.
Also gets rid of unused locals variables.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Use macros for abstracting (1 << foo) to BIT(foo)
and (1ULL << foo64) to BIT_ULL(foo64) in order to match
better with linux kernel requirements.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
With latest LANconf and NVMupdate tools, pf_reset failed due to Firmware not
being ready, so this patch increases I40E_PF_RESET_WAIT_COUNT to 200, using
original value defined for A0 silicon, in order to make sure that FW is ready.
Test result indicates that firmware became ready at the loop count of 114.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch defines a new #define PF_DRIVER.
All the PF specific register definitions are wrapped in it.
The drivers will have to be updated to use the define in the PF
driver builds. Makes for a very short register.h for VF drivers.
Also fixes the code where PF driver register fields were getting used for
VF driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
To prepare for the changes coming up in the X722 device and future
devices, the virtual channel interface has to change slightly. The VF
driver can now report what its capable of supporting, which then informs
the PF driver when it sends the configuration information back to the
VF.
A 1.1 VF driver on a 1.0 PF driver should not send its capabilities.
Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect
or depend upon receiving the VF capabilities.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for "Debug Dump Internal Data" AQ command.
It is used to dump internal firmware or hardware data for debug
purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a workaround to drop any flow control frames from being
transmitted from any VSI. FW can still send Flow control frames if Flow
control is enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
NFV use cases require the ability to steer packets to VSIs by VLAN tag
alone while being in promiscuous mode for multicast and unicast MAC
addresses. These two new functions support that ability.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There are some rare cases where the release resource call will return an
admin Q timeout. In these cases the code needs to try to release the
resource again until it succeeds or it times out.
Also add little endian conversion for checksum
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a new GetStatus command so that the NVM update tool can query
the current status instead of doing fake write requests to probe for
readiness.
Add a facility to run AQ commands through the nvmupdate utility in order
to allow the update tools to interact with the FW and do special
commands needed for updates and configuration changes.
Add a facility to recover the result of a previously run AQ command.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This adds wait states to the NVM update state machine to signify when
waiting for an update operation to finish, whether we're in the middle
of a set of Write operations, or we're now idle but waiting.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for AQ commands related to Tx scheduling.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add the ability to save the AdminQ write back descriptor. If the writeback
descriptor buffer was previously created, this gives it to the AQ command
request to be used to save the results.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Make sure we have the spinlocks before we clear the ARQ and ASQ management
registers. Also, widen the locked portion and make a sanity check earlier
in the send function to be sure we're working with safe register values.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a module_types variable to the link_info struct to save the module
information from get_phy_capabilities. This information can be used to
determine which speeds the module supports.
Also add a new function update_link_info which updates the module_types
parameter and then calls get_link_info. This function should be called
in place of get_link_info so that the module_types variable stays
up-to-date with the rest of the link information.
Also rework the function get_link_status to allow caller to get all
return values in the call chain bubbled back to the source, which keeps
information about failures from being lost.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Update the admin queue command header for the Fortville SW 4 Release. As
part of this release the minor FW API version number is bumped to 4 so
that the FW API version for the FVLSW4 release will now be 1.4.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Replace sprintf with i40e_debug.
Pad the line out with zeros to get to 16 bytes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The error code sent into i40e_aq_rc_to_posix() are signed values, so we
really need to treat them as such.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add status value to string decoding routines to be used in error reporting
in order to give more readable error messages rather than bare error
numbers. This decodes both the i40e_status and the AQ error codes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Due to desires to write userland drivers such as for DPDK support, and
other requests, without needing the rest of the include files, the device
ids are pulled out into a standalone file.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In merge-able RX path, vhost injects interrupts to guest for each packet.
This should degrade performance a lot.
This patch fixes this issue by injecting one interrupt for a batch of packets.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
According to eventfd man page:
typedef uint64_t eventfd_t;
int eventfd_read(int fd, eventfd_t *value);
int eventfd_write(int fd, eventfd_t value);
eventfd_t is defined for the second arg(value), but not for fd.
Here I redefine those fd fields to `int' type, which also removes
the redundant (int) cast. And as the man page stated, we should
cast 1 to eventfd_t type for eventfd_write().
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Update the DPDK 2.2 release notes with recent fixes:
9db649 eal/linux: fix epoll timeout
d49e0f hash: fix memory allocation of cuckoo key table
7fcd13 ixgbe: fix X550 DCB
5e73f4 ixgbe: remove burst size restriction of vector Rx
7e01e3 i40e: fix base driver allocation when not using first numa node
d53364 vhost: fix qemu shutdown
The order of sections (and inside) is inspired from MAINTAINERS file.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vHost eventlink driver is a kernel module that requires a kernel
source/build directory to build the ko. Convert the fixed kernel build
directory specifier to one which may be user specified on the command-line.
Signed-off-by: Aaron Conole <aconole@redhat.com>
This patch originates from the patch:
"Patch for Qemu wrapper for US-VHost to ensure Qemu process ends when
VM is shutdown", http://dpdk.org/ml/archives/dev/2014-June/003606.html
Also update the vhost sample guide doc.
Signed-off-by: Claire Murphy <claire.k.murphy@intel.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
This commit removes the dev-index, so update the doc for this change:
Fixes: 17b8320a3e11 ("vhost: remove index parameter")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
From version 2.2 of DPDK onwards patchsets should include
updates to the Release Notes for additions, fixes and
changes.
Add guideline on what to update in the Release Notes to the
Documentation Contribution guidelines.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Seen by code review.
If dpdk is run with memory only available on a non-0 socket, then i40e pmd
refuses to initialize ports as this pmd requires some memory on socket 0.
Fix this by setting socket to SOCKET_ID_ANY, so that allocations happen on
the caller socket.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
