Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In rte_eth_check_reta_mask(), it is required to align the size of the RETA
table to RTE_RETA_GROUP_SIZE but as the size can be less than the limit,
this should be removed. The change is also applied to a command of testpmd.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch is to add testpmd CLI for getting all loaded DDP profiles.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix the UP and TC mapping to divide multiple UPs to TCs instead of mapping
the UPs who are lager than num_tcs to TC0.
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
In SRIOV mode, the mq_mode of rte_eth_rxmode should not carry VMDQ info
without rx_adv_conf setting.
Fixes: a30979f6ad ("app/testpmd: set Rx VMDq RSS mode")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Extended proc-info application to send DPDK port statistics to
STDOUT in the format expected by collectd exec plugin. Added
HOST ID option to identify the host DPDK process is running on
when multiple instance of DPDK are running in parallel. This is
needed for the barometer project in OPNFV.
Signed-off-by: Roman Korynkevych <romanx.korynkevych@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
RTE_RING_SZ_MASK is redefined here with the original definition in
rte_ring.h. Since rte_ring.h is already included, just remove the
duplicate definition here.
Fixes: caa7028276 ("app/pdump: add tool for packet capturing")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is to logically group unit tests into their own folder,
separating them from "app" folder.
Hopefully this will make the unit test in DPDK more visible.
Following binaries moved to "test" folder:
cmdline-test
test-acl
test-pipeline
test <-- various DPDK unit tests
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Dereferencing a pointer that might be null key_token when calling strstr.
Check if the pointer is null before.
Coverity issue: 141071
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes problem of passing a pointer to sizeof() function.
Now the size of enabled_cdevs structure is passed by RTE_CRYPTO_MAX_DEVS.
Coverity issue: 141068
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes segmentation fault that happens when
using KASUMI, SNOW3G or ZUC authentication algorithms,
as they need authentication keys and was not being set.
It also set value of authentication key to cipher key
when using GMAC algorithm.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit ixes problem with uninitialized nb_cryptodevs variable by
initialize it with 0 value. Program could jump to err label
without running cperf_initialize_cryptodev() function. Also assign 0
value to nb_cryptodevs after cperf_initialize_cryptodev() when value is
negative.
Coverity issue: 141073
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Aleksander Gajewski <aleksanderx.gajewski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Structure opts and structure test_vec are now passed by pointer to
the cperf_check_test_vector.
Coverity issue: 141072
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added total_ops value validation in parse_total_ops() function.
Coverity issue: 141070
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes the case where the string buffer may not have
a null terminator if the source string's length is equal to the
buffer size.
Coverity issue: 141069
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Aleksander Gajewski <aleksanderx.gajewski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some PMDs provide device specific APIs. Bond and xenvirt are existing
samples for this.
And since these are PMD libraries, there are two options on how to link
them for shared library build:
1- They can be linked to all applications by default, using common
rte.app.mk file.
2- They can be explicitly linked to applications that use device
specific API.
Currently option one is in use, this patch switches to the option two.
Moves library linking to the Makefile of application Makefile that uses
device specific API.
This prevent these PMD libraries to be a dependency to applications
that don't use these device specific APIs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes error: implicit declaration of function 'getline'
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
This patchset introduce new application which allows measuring
performance parameters of PMDs available in crypto tree. The goal of
this application is to replace existing performance tests in app/test.
Parameters available are: throughput (--ptest throughput) and latency
(--ptest latency). User can use multiply cores to run tests on but only
one type of crypto PMD can be measured during single application
execution. Cipher parameters, type of device, type of operation and
chain mode have to be specified in the command line as application
parameters. These parameters are checked using device capabilities
structure.
Couple of new library functions in librte_cryptodev are introduced for
application use.
To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set
(it is set by default).
Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
--cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
--total-ops 10000000 --burst-sz 32 --buffer-sz 64
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Same as other cryptodev PMDs, it is necessary to carry out the unit
test for scheduler PMD. Currently the test is designed to attach 2
AESNI-MB cryptodev PMDs as slaves, sets the scheduling mode as round-
robin, and runs almost all AESNI-MB test items (except for sessionless
tests). In the end, the slaves are detached.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When RTE_EFD_VALUE_NUM_BITS is 32, there was a compilation issue
because of an overflow:
app/test/test_efd.c:157:55: error: overflow in expression;
result is 2147483647 with type 'int' [-Werror,-Winteger-overflow]
data[0] = mrand48() & ((1 << RTE_EFD_VALUE_NUM_BITS) - 1);
This commit fixes the issue by using a setting a different
macro VALUE_BITMASK with a conditional
Fixes: 0e925aef27 ("app/test: add EFD functional and perf tests")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add two new commands "show port cap <port>" and "show
port cap all" to display what offload capabilities supported
in ports. It will not only display all the capabilities of
the port, but also the enabling condition for each capability
in the running time.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This enables ACL matches to return 0 where the distinction
from no-match case is not needed.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_acl_add_rules() has no way of checking rule size.
This was hidden because the test effectively checked that
adding a rule with userdata == 0 failed.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce unit tests for ARMv8 crypto PMD.
Add test vectors for short cases such as 160 bytes.
These test cases are ARMv8 specific since the code provides
different processing paths for different input data sizes.
User can validate correctness of algorithms' implementation using:
* cryptodev_sw_armv8_autotest
For performance test one can use:
* cryptodev_sw_armv8_perftest
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added new unit tests for AES-NI GCM PMD to verify new functionalities.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch provides unit tests for set of cipher/hash combinations covering
currently implemented crypto PMD's and allowing to verify scatter gather
support.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
In block cipher test cases, add checks that the source
and destination mbufs are not modified except where expected.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Update driver to use new AESNI Multibuffer IPSec library single
operation functionality (cipher only and authentication only).
This patch also adds tests for this new feature.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This commit adds GCM tests to use within scatter-gather list.
Test use direct chained mbufs created based on the input parameter
for max size for in place operations and out of place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit adds tests of Data Encryption Standard (DES)
algorithm to Intel QuickAssist technology crypto test suites
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Extended functional AES-CBC and AES-CTR cipher-only
tests to run on QAT PMD.
Added AES_CBC cipher-only performance tests on QAT PMD.
No driver changes, but as now tested, QAT documentation
is updated to remove constraint.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
modify set_vf_rx_vlan function to handle the i40e PMD.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
