This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch deprecates the following functions in 17.05,
which will be removed in 17.08.
- rte_crpytodev_scheduler_mode_get()
- rte_crpytodev_scheduler_mode_set()
These two new functions replace them, fixing the typo in their names.
- rte_cryptodev_scheduler_mode_get()
- rte_cryptodev_scheduler_mode_set()
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the incorrection slave session free operation.
Fixes: 57523e682b ("crypto/scheduler: register operation functions")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Refactor capabilities data structures to facilitate
defining different capability sets for different devices
without duplication of data.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds an API to get the run-time slaves number and list
of a cryptodev scheduler PMD.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes segementation fault that may occur in case
of wrong parameters being provided to the cryptographic
session. Unused fields which would cause null dereference
are removed.
Fixes: 1703e94ac5 ("qat: add driver for QuickAssist devices")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds support in OpenSSL PMD for algorithm following the DOCSIS
specification, which combines DES-CBC for full DES blocks (8 bytes)
and DES-CFB for last runt block (less than 8 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Tested-by: Yang Gang <gangx.yang@intel.com>
Underlying IPSec Multi buffer library implements
DOCSIS specification, so this commit adds support
for this new feature, which combines AES-CBC for full
AES blocks (16 bytes) and AES-CFB for last runt block
(less than 16 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
IPSec Multi-buffer library v0.45 has been released,
which includes, among other features, support for DOCSIS BPI
specification and include AVX512 optimizations.
This new version added const qualifiers to some of the function
prototypes, so the PMD has been updated to include these changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Moving the crypto processing from the enqueue burst to the dequeue burst,
to remove the requirement to continually call the
rte_cryptodev_burst_enqueue function to guarantee that all operations get
flushed from the multi-buffer managers buffers.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There is bug when more crypto ops are enqueued than dequeued.
The return value is not checked when trying to enqueue the
processed crypto op into the internal ring, which in the case of being
full will results in crypto ops and mbufs being leaked.
The issue is more obvious with different cores doing enqueue/dequeue.
This patch moves the crypto operation to the dequeue function which
fixes the above issue without having to check for the number of free
entries in the ring.
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fail-over mode works with 2 slaves, primary slave and secondary slave.
In this mode, the scheduler will enqueue the incoming crypto op burst
to the primary slave. When one or more crypto ops are failed to be
enqueued, they then will be enqueued to the secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since the new device configuration API is updated, we can make use of
this feature to the crypto scheduler PMD to configure its slaves
automatically with the same configurations it got. As originally the
slaves have to be manually configured one by one, this patch should
help reducing the coding complexity.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch changes the device configuration API for rte_cryptodev_ops
function prototype, and update all cryptodev PMDs for this change.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch optimizes the crypto op ordering by replacing the
ordering method from using rte_reorder library to using rte_ring
to avoid unnecessary crypto op storing and recovering cost.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch changes the enqueue and dequeue methods to cryptodev
scheduler PMD. Originally a 2-layer function call is carried out
upon enqueuing or dequeuing a burst of crypto ops. This patch
removes one layer to improve the performance.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When a C file for a library/driver is including the public header files for
that library, those need to be included as local includes using quotes
rather than angle-brackets. Without doing so, parallel builds can fail, as
the compiler will only look for those headers in the global include folder
rather than locally, and the build system does not enforce that the headers
for a lib are installed before the rest of the lib is compiled.
Fixes: 097ab0bac0 ("crypto/scheduler: add API")
Fixes: 503e9c5afb ("crypto/scheduler: register as vdev driver")
Fixes: 31439ee72b ("crypto/scheduler: add API implementations")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than reading the size directly from the ring structure, use the
dedicated ring function for that purpose.
Previous commits to do this only did so for the null crypto driver which
was the only one compiled in by default, but all other drivers need to be
similarly updated.
Fixes: b11c78a2e0 ("crypto/null: use ring size function")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Rather than reading the size directly from the ring structure,
use the dedicated function for that purpose.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fixes the missed session backup during enqueue.
Fixes: 100e4f7e44 ("crypto/scheduler: add round-robin mode")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes the wrong slave initialization issue on start-up
Fixes: 100e4f7e44 ("crypto/scheduler: add round-robin mode")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When ciphering and authenticating in the same operation
(cipher-then-auth or auth-then-cipher),
the cipher key and authentication key were set with the same
key, in SNOW3G, KASUMI and ZUC PMDs.
They were using the key of the first transform structure,
instead of using the keys of the two different transform
structures.
This is not a big issue, since usually, the same key is
used for ciphering and authentication, but keys may be different.
Fixes: 3aafc423cf ("snow3g: add driver for SNOW 3G library")
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Fixes: cf7685d68f ("crypto/zuc: add driver for ZUC library")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
AESNI MB now supports authentication only operations,
but the array containing all the possible digest lengths
was not updated to reflect the new algorithm NULL_HASH,
causing an "Out-of-bounds access".
Coverity issue: 140977
Fixes: 8772c3f713 ("crypto/aesni_mb: add single operation functionality")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adds Makefile for scheduler cryptodev PMD, and updates existing
Makefiles. Different than other cryptodev PMDs, scheduler PMD
is required to be built as shared libraries.
Adds scheduler PMD enable and debug flags to config/common_base.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Implements all standard operations required for cryptodev,
and register them to cryptodev operation function pointer table.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds crypto scheduler's PMD's probe and remove function and the device's
enqueue and dequeue burst functions. A cryptodev scheduler PMD is
then registered in the end.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Implements round-robin scheduling mode and register into cryptodev
scheduler ops structure. This mode enqueues a burst of operation
to one of its slaves, and iterates the next burst to the other
slave. Same procedure is done on dequeueing operations.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds the implementations of the APIs for scheduler cryptodev PMD.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds a number of internal structures for the cryptodev scheduler PMD. The
structures include the scheduler context, slave, queue pair context,
and session.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds APIs and function prototypes for the scheduler PMD to perform extra
operations other than standard cryptodev APIs.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This makes struct rte_cryptodev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
This is inline with the recent changes in ethdev
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John Griffin <john.griffin@intel.com>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add two new feature flags:
* RTE_CRYPTODEV_FF_CPU_NEON
represents ARM NEON (TM) instructions
* RTE_CRYPTODEV_FF_CPU_ARM_CE
represents ARM crypto extensions
Add them to both cryptodev library, documentation and relevant
PMD driver for ARMv8.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
This patch introduces crypto poll mode driver
using ARMv8 cryptographic extensions.
CPU compatibility with this driver is detected in
run-time and virtual crypto device will not be
created if CPU doesn't provide:
AES, SHA1, SHA2 and NEON.
This PMD is optimized to provide performance boost
for chained crypto operations processing,
such as encryption + HMAC generation,
decryption + HMAC validation. In particular,
cipher only or hash only operations are
not provided.
The driver currently supports AES-128-CBC
in combination with: SHA256 HMAC and SHA1 HMAC
and relies on the external armv8_crypto library:
https://github.com/caviumnetworks/armv8_crypto
Build ARMv8 crypto PMD if compiling for ARM64
and CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO option
is enable in the configuration file.
ARMV8_CRYPTO_LIB_PATH environment variable will
point to the appropriate library directory.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Current Cryptodev AES-NI GCM PMD is implemented using Multi Buffer
Crypto library.This patch reimplement the device using ISA-L Crypto
library: https://github.com/01org/isa-l_crypto.
The migration entailed the following additional support for:
* GMAC algorithm.
* 256-bit cipher key.
* Session-less mode.
* Out-of place processing
* Scatter-gatter support for chained mbufs (only out-of place and
destination mbuf must be contiguous)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch adds a user defined name initializing parameter to cryptodev
library.
Originally, for software cryptodev PMD, the vdev name parameter is
treated as the driver identifier, and will create an unique name for each
device automatically, which is not necessarily as same as the vdev
parameter.
This patch allows the user to either create a unique name for his software
cryptodev, or by default, let the system creates a unique one. This should
help the user managing the created cryptodevs easily.
Examples:
CLI command fragment 1: --vdev "crypto_aesni_gcm_pmd"
The above command will result in creating a AESNI-GCM PMD with name of
"crypto_aesni_gcm_X", where postfix X is the number assigned by the system,
starting from 0. This fragment can be placed in the same CLI command
multiple times, resulting the postfixs incremented by one for each new
device.
CLI command fragment 2: --vdev "crypto_aesni_gcm_pmd,name=gcm1"
The above command will result in creating a AESNI-GCM PMD with name of
"gcm1". This fragment can be placed in the same CLI command multiple
times, as long as each having a unique name value.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch introduces RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER feature flag
informing that selected crypto device supports segmented mbufs natively
and doesn't need to be coalesced before crypto operation.
While using segmented buffers in crypto devices may have unpredictable
results, for PMDs which doesn't support it natively, additional check is
made for debug compilation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
EVP_CIPHER_CTX_set_padding() function always returns 1, so the check is
unneeded.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Tested-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch sets iv size in qat PMD to 12 bytes to be
conformant with nist SP800-38D.
Fixes: 26c2e4ad5a ("cryptodev: add capabilities discovery")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch sets iv size in aesni gcm PMD to 12 bytes to be
conformant with nist SP800-38D.
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
