The xenvirt PMD was removed from 17.11
while this link parameter was added.
Fixes: 5b590fbe09 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Currently, testpmd CLI doesn't permit to add leaf and non-leaf node when
port is started. It doesn't work in case of i40e device as DCB
configuration is deleted when port is stopped. Therefore, removes the
port status check before invoking leaf and nonleaf node API in the cli.
If needed, device can add port status check at the driver layer.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When defining two failsafe devices in testpmd the port numbers of the
failsafe devices may not be consecutive.
For example: if failsafe device includes a PCI device and a TAP device
then failsafe port numbers would be 0 and 3.
Port 0 - failsafe #1 device
Port 1 - PCI #1 device
Port 2 - TAP #1 device
Port 3 - failsafe #2 device
Port 4 - PCI #2 device
Port 5 - TAP #2 device
If forwarding is defined between the failsafe devices including a peer
address the forwarding should be between peer addresses of ports 0
and 3. Instead testpmd establishes forwarding between peer addresses
of consecutive ports 0 and 1. This commit fixes this bug.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The mempool and the physical address of the crypto operation
at mempool initialization were not being set,
leading to incorrect physical addresses.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Some drivers might allow to commit the traffic management hierarchy
while being in running state. Therefore, removes port status check
before invoking hierarchy commit API in the cli. If needed, device can
add port status check at the driver layer.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use service cores for offloading event scheduling in case of
centralized scheduling instead of calling the schedule api directly.
This removes the dependency on dedicated scheduler core specified by
giving command line option --slcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When number of DCB traffic class is 4, user priority should be
mapped to traffic class 0/1/2/3.
Fixes: cb60ede6e3 ("ethdev: rename DCB field in config structs")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Struct rss_conf.rss_key_len is not initialised forcing the user to
verify the rss_conf.rss_key pointer to know if the key is present
or not. rss_conf.rss_key_len should have a valid length according
to the size of the rss_key pointed.
Fixes: 560e02ee52 ("app/testpmd: configure RSS without restart")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The four function declarations have no function implementation,
remove them.
Fixes: 0db70a8030 ("app/testpmd: add commands for filters")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Add following CLIs in testpmd application for device traffic management;
- commands to add TM hierarchy nodes (leaf and nonleaf).
- command for runtime update of node weight.
- command to commit the TM hierarchy
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
app/test-crypto-perf/main.c:596:6: error: ‘total_nb_qps’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
if (i == total_nb_qps)
^
Fixes: c4f916e332 ("app/crypto-perf: support multiple queue pairs")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Increase port id range to 16 bits and remove the unnecessary cast.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In order to improve memory utilization, a single mempool
is created, containing the crypto operation and mbufs
(one if operation is in-place, two if out-of-place).
This way, a single object is allocated and freed
per operation, reducing the amount of memory in cache,
which improves scalability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for multiple queue pairs, when there are
more logical cores available than crypto devices enabled.
For instance, if there are 4 cores available and
2 crypto devices, each device will have two queue pairs.
This is useful to have multiple logical cores using
a single crypto device, without needing to initialize
a crypto device per core.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For throughput and latency tests, it is not required
to populate the mbufs with any test vector.
For verify test, there is already a function that rewrites
the mbufs every time they are going to be used with
crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When running the verify test, mbufs in the pool were
populated with the test vector loaded from a file.
To avoid limiting the number of operations to the pool size,
mbufs will be rewritten with the test vector, before
linking them to the crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since DPDK 17.08, there is specific parameters
for AEAD algorithm, like AES-GCM. When verifying
crypto operations with test vectors, the parser
was not reading AEAD data (such as IV or key).
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of prepending the AAD (Additional Authenticated Data)
in the mbuf, it is easier to set after the crypto operation,
as it is a read-only value, like the IV, and then it is not
restricted to the size of the mbuf headroom.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Currently, there is some duplication in all the test types,
in the crypto performance application.
In order to improve maintainability of this code,
and ease future work on it, common functions have been separated
in a different file that gets included in all the tests.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb25 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This patch adds a new benchmarking mode, which is intended for
microbenchmarking individual parts of the cryptodev framework,
specifically crypto ops alloc-build-free, cryptodev PMD enqueue
and cryptodev PMD dequeue.
It works by first benchmarking crypto operation alloc-build-free
loop (no enqueues/dequeues happening), and then benchmarking
enqueue and dequeue separately, by first completely filling up the
TX queue, and then completely draining the RX queue.
Results are shown as cycle counts per alloc/build/free, PMD enqueue
and PMD dequeue.
One new test mode is added: "pmd-cyclecount"
(called with --ptest=pmd-cyclecount)
New command-line argument is also added:
--pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter
that controls the delay between enqueue and dequeue. This is
useful for benchmarking hardware acceleration, as hardware may
not be able to keep up with enqueued packets. This parameter
can be increased if there are large amounts of dequeue
retries.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter makes number of cryptodev descriptors adjustable
and defaults to earlier hardcoded default of 2048.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch add a API configuration of queue region in rss.
It can parse the parameters of region index, queue number,
queue start index, user priority, traffic classes and so on.
According to commands from command line, it will call i40e
private API and start the process of set or flush queue region
configure. As this feature is specific for i40e, so private API
will be used. Aslo add a document for these new commands.
Queue region only support PF by now, so this document is
only for configuration of queue region on PF port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
