This patch fixes three problems in memory autotest:
- the regex for IOVA
- missing validation of second and following output lines
- propagation of error to consecutive tests
- conversion base for mem size (hex indtead of dec)
First fix is for changes introduced with IOVA, the regex was not
updated which lead to unit test failure. Patch now also uses loop for
line outputs processing to verify more than just one line. By this we
also satisfy the pexpect() and scan the "Test OK"/"Test Failed" so in
case of error all output lines are consumed and does not break the
consecutive test (error does not propagate).
Fixes: 7ba49d39f1 ("mem: rename segment address from physical to IOVA")
Fixes: b4ce15aa2b ("app/test: fix memory autotest")
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
This patch fixes the memory leaks in memzone_autotest. Those memory leaks
lead to failures in tests from the same testing group due to out of memory
problems. With introduction of rte_memzone_free() it is now possible to
free the memzone. Fix uses this API call to make a clean after each test
case.
Fixes: ff909fe21f ("mem: introduce memzone freeing")
Cc: stable@dpdk.org
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
The printed time values presented in TSC is not straight forward
showing the performance difference. And if the high resolution
counter is not enabled, time value is too small to show the actual
performance (e.g. "1 - 1" seems the same but in fact the perfomance
diffs by 50% or more).
With the performance difference ratio caculated and printed, it'll be
easier for people to read and compare the performance between
rte_memcpy() and memcpy().
Since the TSC values' units may diff a lot on different platforms,
the total execution time of aligned/unaligned memcpy test are
provided to allow comparation between platforms.
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Error can be reproduce if we run pmd_perf_autotest with more then
one device in such way:
RTE>>set_rxtx_sc poll_before_xmit
RTE>>pmd_perf_autotest
if first burst was value less than MAX_PKT_BURST in the end we overwrite
pkts_burst table for rx which was supposed for another interface.
Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
This commit fixes a possible race condition if an application
uses the service-cores infrastructure and the function to run
a service on an application lcore at the same time.
The fix is to change the num_mapped_cores variable to be an
atomic variable. This causes concurrent accesses by multiple
threads to a service using rte_service_run_iter_on_app_lcore()
to detect if another core is currently mapped to the service,
and refuses to run if it is not multi-thread safe.
The run iteration on app lcore function has two arguments, the
service id to run, and if atomics should be used to serialize access
to multi-thread unsafe services. This allows applications to choose
if they wish to use use the service-cores feature, or if they
take responsibility themselves for serializing invoking a service.
See doxygen documentation for more details.
Two unit tests were added to verify the behaviour of the
function to run a service on an application core, testing both
a multi-thread safe service, and a multi-thread unsafe service.
The doxygen API documentation for the function has been updated
to reflect the current and correct behaviour.
Fixes: e9139a32f6 ("service: add function to run on app lcore")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Revert the patchset run-time Linking support including the following
3 commits:
Fixes: 84cc318424 ("eal/x86: select optimized memcpy at run-time")
Fixes: c7fbc80fe6 ("test: select memcpy alignment unit at run-time")
Fixes: 5f180ae329 ("efd: move AVX2 lookup in its own compilation unit")
The patchset would cause perf drop in vhost/virtio loopback performance
test. Because the run-time dispatch must cost at least a function call
comparing to the compile-time dispatch. And the reference cpu cycles value
is small. And in the test, when using 128-256 bytes packet, it would cause
16%-20% perf drop with mergeble path. When using 256 bytes packet, it would
cause 13% perf drop with vector path.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_mem_virt2phy() is kept and used in functions which
works only with physical addresses.
For all other calls this function is replaced by rte_mem_virt2iova()
which does a direct mapping (no conversion) in the VA case.
Note: the new function rte_mem_virt2iova() function matches the
behaviour implemented in rte_mem_virt2phy() by the commit
680f6c1260 ("mem: honor IOVA mode in virt2phy")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use service run iter for event scheduling instead of calling the event
schedule api directly.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Enable out of place buffer test cases in nxp dpaa2_sec
Signed-off-by: Alok Makhariya <alok.makhariya@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The unit test for flow classify should be disabled
if the library is disabled in the configuration.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add flow_classify_autotest program.
Set up IPv4 ACL field definitions.
Create table_acl for use by librte_flow_classify API's.
Create an mbuf pool for use by rte_flow_classify_query.
For each of the librte_flow_classify API's:
test with invalid parameters
test with invalid patterns
test with invalid actions
test with valid parameters
Initialise ipv4 udp traffic for use by the udp test for
rte_flow_classifier_run.
Initialise ipv4 tcp traffic for use by the tcp test for
rte_flow_classifier_run.
Initialise ipv4 sctp traffic for use by the sctp test for
rte_flow_classifier_run.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
add initialize_tcp_header function
add initialize_stcp_header function
add initialize_ipv4_header_proto function
add generate_packet_burst_proto function
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Introduce mask-based hash functions in hash_func.h.
Propagate their usage in test/test, test/test-pipeline and
examples/ip_pipeline.
Remove the non-mask-based hash function prototype from API (which
was previously used as build workaround).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 32-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 16-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 8-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the variable size key LRU hash table to use the
mask-based hash function and the unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the variable size key extendible bucket (EXT) hash
table to use the mask-based hash function and the unified
parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the variable size key Least Recently Used
(LRU) hash tables are removed. The remaining hash tables are renamed
to eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the variable size key extendible bucket
hash tables are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 16-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 8-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Removing calls to hash tables that are going to be removed later.
The calls are removed from test/test, test/test-pipeline,
examples/ip_pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch modifies assignment of alignment unit from build-time
to run-time based on CPU flags that machine supports.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds a test for verifying the bitmap operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added AES-CCM tests for Intel QAT PMD and OpenSSL PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Before adding AES-CCM tests, some test code used
for AES-GCM can be renamed, so it can be reused
for AES-CCM, as both need similar parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
Since the crypto perf application is flexible enough
to cover all the crypto performance tests, these are not needed
anymore, so they will be removed to avoid duplications.
Besides, the crypto perf application gives the user more options
to get performance, for every single supported algorithm,
such as varying the buffer size as the user wants.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that PMDs do not need extra space in the mbuf
to store temporarily the digest when verifying
an authentication tag, it is not required to allocate
more memory in the mbufs passed to cryptodev.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add unit tests for rte_event_eth_rx_adapter_xxx() APIs
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the new_event_threshold port attribute, so the entire port
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds three new queue attributes, so that the entire queue
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
