Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add warning and counter to handle the malicious driver detection (MDD)
event.
When the hardware determines that a malicious driver on VF, this VF will
become unworkable, the PF records and gives a warning message.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update supported Intel NIC driver version and firmware version for 19.11
Update supported Intel NIC driver version to 2.8.43 for 19.08 which is
widely tested.
Fixes: cb8a35c22aa9 ("doc: update supported i40e driver and firmware version")
Cc: stable@dpdk.org
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix OFED and rdma-core versions for current offloads.
Add new offloads minimum versions.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Aligning the Wind River copyright notices to be consistent with the
other files which bare the Wind River copyright notice.
Fixes: 32113d352d3b ("doc: replace license text with SPDX tag in AVP guide")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Commit in fixes line sets the DV (Direct Verbs) flow engine as default.
Newer versions of DV flow engine use the DR (Direct Rules) features.
DR is supported from RDMA Core library version rdma-core-24.0.
This cause failure to start port when using older rdma-core version,
without DR support.
This patch selects DV flow engine if rdma-core version is v24.0 or
higher. Verbs flow engine is selected otherwise.
Fixes: cd4569d2bf3c ("net/mlx5: change default flow engine to DV")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
- Add note for sharing an adapter between DPDK and Linux drivers.
- Update the firmware version in example.
- Add Config note for potential error due to lack of memzone descriptor
count.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Updating bnxt.ini file.
These features were added earlier under the following commits.
1) 94d4afd2d167 ("net/bnxt: advertise scatter Rx offload capability")
2) 57d5e5bc86e4 ("net/bnxt: add statistics")
3) 88920136688c ("net/bnxt: support xstats get by id")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Corrected one typo and IP address according RFC5735.
Fixes: de96fe68ae95 ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Sync mail box data structures to version 1.1.3.
Add mail box version verification and defer initializing octeontx
devices if mail box version mismatches.
Update OCTEON TX limitaion with max mempool size used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since not all data paths support flow mark, the driver needs
a hint from application to select the correct data path if
flow mark is required. The patch introduces a devarg
"flow-mark-support" as a workaround solution, since a standard
way is still ongoing.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As the result of testing it was found that some hosts have
the performance penalty imposed by required write memory barrier
after doorbell writing. Before 19.08 release there was some
heuristics to decide whether write memory barrier should be
performed. For the bursts of recommended size (or multiple)
it was supposed there were some extra ongoing packets in the
next burst and write memory barrier may be skipped (supposed
to be performed in the next burst, at least after descriptor
writing).
This patch restores that behaviour, the devargs tx_db_nc=2
must be specified to engage this performance tuning feature.
Fixes: 8409a28573d3 ("net/mlx5: control transmit doorbell register mapping")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The default flow engine is Verbs flow engine, for legacy reasons.
This patch changes the default to DV flow engine (dv_flow_en = 1).
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add kernel driver, firmware and DDP package matching list
for ice PMD.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Zero-copy slave support for memif PMD.
Slave interface exposes DPDK memory to
master interface. Only single file segments
are supported (EAL option --single-file-segments).
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to set supported ptypes for octeontx2 and
remove devarg scheme to disable ptype parsing support as
application can use rte_eth_dev_set_ptypes() normative API
to enable the same use case.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Retrieve burst mode information according to the selected Rx/Tx mode and
offloads.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Shoot repeated words in all our guides.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
This patch implements use of the API for LRO aggregated packet
max size.
Rx queue create is updated to use the relevant configuration.
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The original design is to use rte_mbuf::udata64 to save the metadata of
protocol extraction which has network protocol data fields and type, a
private API is used to decode this metadata.
Use the dynamic mbuf field and flags to register the needed fields in
mbuf, to avoid overwriting 'rte_mbuf::udata64', since the application
may use it. Now the protocol extraction metadate is saved into dynamic
mbuf field with 4B size, and its type and validity is indicated by the
related dynamic mbuf flags in 'rte_mbuf::ol_flags'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The rdma core library can map doorbell register in two ways,
depending on the environment variable "MLX5_SHUT_UP_BF":
- as regular cached memory, the variable is either missing or
set to zero. This type of mapping may cause the significant
doorbell register writing latency and requires explicit
memory write barrier to mitigate this issue and prevent
write combining.
- as non-cached memory, the variable is present and set to
not "0" value. This type of mapping may cause performance
impact under heavy loading conditions but the explicit write
memory barrier is not required and it may improve core
performance.
The new devarg is introduced "tx_db_nc", if this parameter is
set to zero, the doorbell register is forced to be mapped to
cached memory and requires explicit memory barrier after
writing to. If "tx_db_nc" is set to non-zero value the doorbell
will be mapped as non-cached memory, not requiring the memory
barrier. If "tx_db_nc" is missing the behaviour will be defined
by presence of "MLX5_SHUT_UP_BF" in environment. If variable
is missed the default value zero will be set for ARM64 hosts
and one for others.
In run time the code checks the mapping type and provides the
memory barrier after writing to tx doorbell register if it is
needed. The mapping type is extracted directly from the
uar_mmap_offset field in the queue properties.
Fixes: 18a1c20044c0 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The PMD parameter dv_xmeta_en is added to control extensive
metadata support. A nonzero value enables extensive flow
metadata support if device is capable and driver supports it.
This can enable extensive support of MARK and META item of
rte_flow. The newly introduced SET_TAG and SET_META actions
do not depend on dv_xmeta_en parameter, because there is
no compatibility issue for new entities. The dv_xmeta_en is
disabled by default.
There are some possible configurations, depending on parameter
value:
- 0, this is default value, defines the legacy mode, the MARK
and META related actions and items operate only within NIC Tx
and NIC Rx steering domains, no MARK and META information
crosses the domain boundaries. The MARK item is 24 bits wide,
the META item is 32 bits wide.
- 1, this engages extensive metadata mode, the MARK and META
related actions and items operate within all supported steering
domains, including FDB, MARK and META information may cross
the domain boundaries. The ``MARK`` item is 24 bits wide, the
META item width depends on kernel and firmware configurations
and might be 0, 16 or 32 bits. Within NIC Tx domain META data
width is 32 bits for compatibility, the actual width of data
transferred to the FDB domain depends on kernel configuration
and may be vary. The actual supported width can be retrieved
in runtime by series of rte_flow_validate() trials.
- 2, this engages extensive metadata mode, the MARK and META
related actions and items operate within all supported steering
domains, including FDB, MARK and META information may cross
the domain boundaries. The META item is 32 bits wide, the MARK
item width depends on kernel and firmware configurations and
might be 0, 16 or 24 bits. The actual supported width can be
retrieved in runtime by series of rte_flow_validate() trials.
If there is no E-Switch configuration the ``dv_xmeta_en`` parameter is
ignored and the device is configured to operate in legacy mode (0).
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- ConnectX-6DX device ID
- ConnectX-6DX SRIOV device ID
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
System DPI Packet Interface Unit (SDP) is a co-processor
of OCTEON TX2 which provides PCIe endpoint support for a
remote host to DMA packets into and out of the OCTEON TX2 SoC.
SDP interface comes in to live only when it is connected in
EP mode. It exposes input and output queue pairs to remote host
for instruction input and packet output. It can be used as
a communication channel between remote host and OCTEON TX2.
Host machine needs to use corresponding user/kernel mode
driver to communicate with SDP interface on OCTEON TX2 SoC.
SDP interface support is limited to SDP PF device now.
No SDP VF support.
Signed-off-by: Subrahmanyam Nilla <snilla@marvell.com>
Signed-off-by: Venkateshwarlu Nalla <venkatn@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch removes feature "Free Tx mbuf" on demand from hinic.ini
because pmd driver does not support this feature.
Fixes: 1d09792a270a ("net/hinic: add build and doc files")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch removes deprecated feature Flow Director from hinic.ini,
hinic.rst and release_19_11.rst, because the feature has been
removed from the feature list in the following commit:
Commit 030febb6642c ("doc: remove deprecated ethdev features"), and
adds Flow API feature which is for generic filtering to doc files.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a13 ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68ccd ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c2102 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf53 ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch removes deprecated feature 'Flow Director' from hns3.ini
and hns3_vf.ini because the feature has been removed from the
feature list in the following commit:
Commit 030febb6642c ("doc: remove deprecated ethdev features")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2ac ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Rx queue for LRO is created using DevX. Flows created on this queue
must use the DV flow engine.
This patch adds check of dv_flow_en=1 when configuring LRO support
on device spawn.
Documentation is updated accordingly.
Fixes: 175f1c21d033 ("net/mlx5: check conditions to enable LRO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch bump the supported SDK and MC firmware version
to the latest.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
