This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Updated description of rte_eth_rx_burst() to reflect what drivers,
when using vector instructions, expect from nb_pkts.
Also discussed on the mailing list here:
http://inbox.dpdk.org/dev/98CBD80474FA8B44BF855DF32C47DC35C61257@smartserver.smartshare.dk/
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The definitions of RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP
and RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP were inserted
before the last comment of Tx offloads.
It is moved in a better place,
with comments moved to be before the definition.
A group comment is added to better describe device capabilities.
Fixes: cac923cfea47 ("ethdev: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For consistency between Rx and Tx timestamps,
managing mbuf registrations inside the driver, as properly documented,
is a simpler expectation.
The only driver to support this feature (mlx5) is updated
as well as the testpmd application.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The offload flag DEV_RX_OFFLOAD_TIMESTAMP had no documentation.
After switching to dynamic mbuf flag and field,
it becomes even more important to explicit the feature behaviour.
A doxygen comment for the timesync API was mentioning
the deprecated timestamp field, so it is also updated.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Use ENODEV as the error code if specified port ID is invalid.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Queue stats will be removed from basic stats to xstats.
It will be PMDs responsibility to fill queue stats based on number of
queues they have.
Until all PMDs implement the xstats, a temporary
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' device flag created. PMDs switched
to the xstats should clear this flag to bypass the ethdev layer autofill
for queue stats.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change rte_eth_dev_stop() return value from void to int
and return negative errno values in case of error conditions.
Also update the usage of the function in ethdev according to
the new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API function rte_eth_dev_close() was returning void.
The return type is changed to int for notifying of errors.
If an error happens during a close operation,
the status of the port is undefined,
a maximum of resources having been freed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The DPDK datapath in the transmit direction is very flexible.
An application can build the multi-segment packet and manages
almost all data aspects - the memory pools where segments
are allocated from, the segment lengths, the memory attributes
like external buffers, registered for DMA, etc.
In the receiving direction, the datapath is much less flexible,
an application can only specify the memory pool to configure the
receiving queue and nothing more. In order to extend receiving
datapath capabilities it is proposed to add the way to provide
extended information how to split the packets being received.
The new offload flag RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT in device
capabilities is introduced to present the way for PMD to report to
application about supporting Rx packet split to configurable
segments. Prior invoking the rte_eth_rx_queue_setup() routine
application should check RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT flag.
The following structure is introduced to specify the Rx packet
segment for RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT offload:
struct rte_eth_rxseg_split {
struct rte_mempool *mp; /* memory pools to allocate segment from */
uint16_t length; /* segment maximal data length,
configures "split point" */
uint16_t offset; /* data offset from beginning
of mbuf data buffer */
uint32_t reserved; /* reserved field */
};
The segment descriptions are added to the rte_eth_rxconf structure:
rx_seg - pointer the array of segment descriptions, each element
describes the memory pool, maximal data length, initial
data offset from the beginning of data buffer in mbuf.
This array allows to specify the different settings for
each segment in individual fashion.
rx_nseg - number of elements in the array
If the extended segment descriptions is provided with these new
fields the mp parameter of the rte_eth_rx_queue_setup must be
specified as NULL to avoid ambiguity.
There are two options to specify Rx buffer configuration:
- mp is not NULL, rrx_conf.rx_nseg is zero, it is compatible
configuration, follows existing implementation, provides
the single pool and no description for segment sizes
and offsets.
- mp is NULL, rx_conf.rx_seg is not NULL, rx_conf.rx_nseg is not
zero, it provides the extended configuration, individually for
each segment.
f the Rx queue is configured with new settings the packets being
received will be split into multiple segments pushed to the mbufs
with specified attributes. The PMD will split the received packets
into multiple segments according to the specification in the
description array.
For example, let's suppose we configured the Rx queue with the
following segments:
seg0 - pool0, len0=14B, off0=2
seg1 - pool1, len1=20B, off1=128B
seg2 - pool2, len2=20B, off2=0B
seg3 - pool3, len3=512B, off3=0B
The packet 46 bytes long will look like the following:
seg0 - 14B long @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B long @ 128 in mbuf from pool1
seg2 - 12B long @ 0 in mbuf from pool2
The packet 1500 bytes long will look like the following:
seg0 - 14B @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B @ 128 in mbuf from pool1
seg2 - 20B @ 0 in mbuf from pool2
seg3 - 512B @ 0 in mbuf from pool3
seg4 - 512B @ 0 in mbuf from pool3
seg5 - 422B @ 0 in mbuf from pool3
The offload RTE_ETH_RX_OFFLOAD_SCATTER must be present and
configured to support new buffer split feature (if rx_nseg
is greater than one).
The split limitations imposed by underlying PMD is reported
in the new introduced rte_eth_dev_info->rx_seg_capa field.
The new approach would allow splitting the ingress packets into
multiple parts pushed to the memory with different attributes.
For example, the packet headers can be pushed to the embedded
data buffers within mbufs and the application data into
the external buffers attached to mbufs allocated from the
different memory pools. The memory attributes for the split
parts may differ either - for example the application data
may be pushed into the external memory located on the dedicated
physical device, say GPU or NVMe. This would improve the DPDK
receiving datapath flexibility with preserving compatibility
with existing API.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
After hairpin queues are configured, in general, the application will
maintain the ports topology and even the queues configuration for
the hairpin. But sometimes it will not.
If there is no hot-plug, it is easy to bind and unbind hairpin among
all the ports. The application can just connect or disconnect the
hairpin egress ports to/from all the probed ingress ports. Then all
the connections could be handled properly.
But with hot-plug / hot-unplug, one port could be probed and removed
dynamically. With two ports hairpin, all the connections from and to
this port should be handled after start(bind) or before stop(unbind).
It is necessary to know the hairpin topology with this port.
This function will return the ports list with the actual peer ports
number after configuration. Either peer Rx or Tx ports will be
gotten with this function call.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
To support two ports hairpin mode and keep the backward compatibility
for the application, two new attribute members of the hairpin queue
configuration structure will be added.
`tx_explicit` means if the application itself will insert the Tx part
flow rules. If not set, PMD will insert the rules implicitly.
`manual_bind` means if the hairpin Tx queue and peer Rx queue will be
bound automatically during the device start stage.
Different Tx and Rx queue pairs could have different values, but it
is highly recommended that all paired queues between one egress and
its peer ingress ports have the same values, in order not to bring
any chaos to the system. The actual support of these attribute
parameters will be checked and decided by the PMD drivers.
In the single port hairpin, if both are zero without any setting, the
behavior will remain the same as before. It means that no bind API
needs to be called and no Tx flow rules need to be inserted manually
by the application.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In single port hairpin mode, all the hairpin Tx and Rx queues belong
to the same device. After the queues are set up properly, there is
no other dependency between the Tx queue and its Rx peer queue. The
binding process that connected the Tx and Rx queues together from
hardware level will be done automatically during the device start
procedure. Everything required is configured and initialized already
for the binding process.
But in two ports hairpin mode, there will be some cross-dependences
between two different ports. Usually, the ports will be initialized
serially by the main thread but not in parallel. The earlier port
will not be able to enable the bind if the following peer port is
not yet configured with HW resources. What's more, if one port is
detached / attached dynamically, it would introduce more trouble
for the hairpin binding.
To overcome these, new APIs for binding and unbinding are added.
During startup, only the hairpin Tx and Rx peer queues will be set
up. Nothing will be done when starting the device if the queues are
without auto-bind attribute. Only after the required ports pair
started, the `rte_eth_hairpin_bind()` API can be called to bind the
all Tx queues of the egress port to the Rx queues of the peer port.
Then the connection between the egress and ingress ports pair will
be established.
The `rte_eth_hairpin_unbind()` API could be used to disconnect the
egress and the peer ingress ports. This should only be called before
the device is closed if needed. When doing the clean up, all the
egress and ingress pairs related to a single port should be taken
into consideration, especially in the hot unplug case.
mode is described.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Call back functions are registered on the control plane. They
are accessed from the data plane. Hence, correct memory orderings
should be used to avoid race conditions.
Fixes: 4dc294158cac ("ethdev: support optional Rx and Tx callbacks")
Fixes: c8231c63ddcb ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds checking whether the related Tx or Rx queue has been
setup in the queue-related API functions to avoid illegal address
access.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As described in doc/guides/prog_guide/poll_mode_drv.rst,
the naming scheme for the xstats is parts separated with underscore:
* direction
* detail 1
* detail 2
* detail n
* unit
where detail 1 can be "q" followed with a queue number.
It means the name of the stats per queue should be rx_qN_* or tx_qN_*.
The second underscore was missing so far.
Fixing the basic xstat names may be considered an API change,
that's why it should not be backported.
While fixing this mistake, some examples of the naming scheme
are given as part of the API documentation of rte_eth_xstat_name.
More proposals about standardizing statistics:
http://fast.dpdk.org/events/slides/DPDK-2019-09-Ethernet_Statistics.pdf
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Currently, the rte_flow functions are not defined as thread safe.
DPDK applications either call the functions in single thread or
protect any concurrent calling for the rte_flow operations using
a lock.
For PMDs support the flow operations thread safe natively, the
redundant protection in application hurts the performance of the
rte_flow operation functions.
And the restriction of thread safe is not guaranteed for the
rte_flow functions also limits the applications' expectation.
This feature is going to change the rte_flow functions to be thread
safe. As different PMDs have different flow operations, some may
support thread safe already and others may not. For PMDs don't
support flow thread safe operation, a new lock is defined in ethdev
in order to protects thread unsafe PMDs from rte_flow level.
A new RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE device flag is added to
determine whether the PMD supports thread safe flow operation or not.
For PMDs support thread safe flow operations, set the
RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE flag, rte_flow level functions will
skip the thread safe helper lock for these PMDs. Again the rte_flow
level thread safe lock only works when PMD operation functions are
not thread safe.
For the PMDs which don't want the default mutex lock, just set the
flag in the PMD, and add the prefer type of lock in the PMD. Then
the default mutex lock is easily replaced by the PMD level lock.
The change has no effect on the current DPDK applications. No change
is required for the current DPDK applications. For the standard posix
pthread_mutex, if no lock contention with the added rte_flow level
mutex, the mutex only does the atomic increasing in
pthread_mutex_lock() and decreasing in
pthread_mutex_unlock(). No futex() syscall will be involved.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch adds Forward error correction(FEC) support for ethdev.
Introduce APIs which support query and config FEC information in
hardware.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, base and nb_queue in the tc_rxq and tc_txq information
of queue and TC mapping on both TX and RX paths are uint8_t.
However, these data will be truncated when queue number under a TC
is greater than 256. So it is necessary for base and nb_queue to
change from uint8_t to uint16_t.
Fixes: 89d6728c7837 ("ethdev: get DCB information")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When generating the documentation, a new warning can be seen:
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2441:
warning: argument 'link_speed' of command @param is not found in the
argument list of rte_eth_link_speed_to_str(uint32_t speed_link)
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2455: warning: The following
parameters of rte_eth_link_speed_to_str(uint32_t speed_link) are not
documented: parameter 'speed_link'
Align the function prototype to its doxygen description.
Fixes: fbf931c9c392 ("ethdev: format link status text")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch reserves 2 bits as input selection to select inner and outer
encapsulation level for RSS computation. It is combined with existing
ETH_RSS_* to choose inner or outer layers.
This functionality already exists in rte_flow through level parameter in
RSS action configuration rte_flow_action_rss.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some ethdev functions are for drivers only, not for applications.
Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.
Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Marking 'rte_eth_rx_descriptor_done()' API as deprecated.
``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.
Plan is to remove the API on 21.11 release.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When querying the link information, the link status is
a mandatory major information.
Other boolean values are supposed to be accurate:
- duplex mode (half/full)
- negotiation (auto/fixed)
This API update is making explicit that the link speed information
is optional.
The value ETH_SPEED_NUM_NONE (0) was already part of the API.
The value ETH_SPEED_NUM_UNKNOWN (infinite) is added to cover
two different cases:
- speed is not known by the driver
- device is virtual
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Suggested-by: Benoit Ganne <bganne@cisco.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The comment used the term whitelist and was awkardly written.
Replace it with simpler direct description of adding a new address.
No code or API changes for this.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some confusing comments were still present from old days,
when most drivers were from Intel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is the requirement on some networks for precise traffic timing
management. The ability to send (and, generally speaking, receive)
the packets at the very precisely specified moment of time provides
the opportunity to support the connections with Time Division
Multiplexing using the contemporary general purpose NIC without involving
an auxiliary hardware. For example, the supporting of O-RAN Fronthaul
interface is one of the promising features for potentially usage of the
precise time management for the egress packets.
The main objective of this patchset is to specify the way how applications
can provide the moment of time at what the packet transmission must be
started and to describe in preliminary the supporting this feature
from mlx5 PMD side [1].
The new dynamic timestamp field is proposed, it provides some timing
information, the units and time references (initial phase) are not
explicitly defined but are maintained always the same for a given port.
Some devices allow to query rte_eth_read_clock() that will return
the current device timestamp. The dynamic timestamp flag tells whether
the field contains actual timestamp value. For the packets being sent
this value can be used by PMD to schedule packet sending.
The device clock is opaque entity, the units and frequency are
vendor specific and might depend on hardware capabilities and
configurations. If might (or not) be synchronized with real time
via PTP, might (or not) be synchronous with CPU clock (for example
if NIC and CPU share the same clock source there might be no
any drift between the NIC and CPU clocks), etc.
After PKT_RX_TIMESTAMP flag and fixed timestamp field supposed
deprecation and obsoleting, these dynamic flag and field might be
used to manage the timestamps on receiving datapath as well. Having
the dedicated flags for Rx/Tx timestamps allows applications not
to perform explicit flags reset on forwarding and not to promote
received timestamps to the transmitting datapath by default.
The static PKT_RX_TIMESTAMP is considered as candidate to become
the dynamic flag and this move should be discussed.
When PMD sees the "rte_dynfield_timestamp" set on the packet being sent
it tries to synchronize the time of packet appearing on the wire with
the specified packet timestamp. If the specified one is in the past it
should be ignored, if one is in the distant future it should be capped
with some reasonable value (in range of seconds). These specific cases
("too late" and "distant future") can be optionally reported via
device xstats to assist applications to detect the time-related
problems.
There is no any packet reordering according timestamps is supposed,
neither within packet burst, nor between packets, it is an entirely
application responsibility to generate packets and its timestamps
in desired order. The timestamps can be put only in the first packet
in the burst providing the entire burst scheduling.
PMD reports the ability to synchronize packet sending on timestamp
with new offload flag:
This is palliative and might be replaced with new eth_dev API
about reporting/managing the supported dynamic flags and its related
features. This API would break ABI compatibility and can't be introduced
at the moment, so is postponed to 20.11.
For testing purposes it is proposed to update testpmd "txonly"
forwarding mode routine. With this update testpmd application generates
the packets and sets the dynamic timestamps according to specified time
pattern if it sees the "rte_dynfield_timestamp" is registered.
The new testpmd command is proposed to configure sending pattern:
set tx_times <burst_gap>,<intra_gap>
<intra_gap> - the delay between the packets within the burst
specified in the device clock units. The number
of packets in the burst is defined by txburst parameter
<burst_gap> - the delay between the bursts in the device clock units
As the result the bursts of packet will be transmitted with specific
delays between the packets within the burst and specific delay between
the bursts. The rte_eth_read_clock is supposed to be engaged to get the
current device clock value and provide the reference for the timestamps.
[1] http://patches.dpdk.org/patch/73714/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for PPPoE. Typically,
session id would be the RSS input set for a PPPoE packet, but
as a hint, each driver may have different default behaviors.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defines some new RSS offload types for ETH/S_VLAN/C_VLAN/L2TPV3/
/PFCP/L2_SRC_ONLY/L2_DST_ONLY.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add tracepoints at important and mandatory APIs for tracing support.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
The maximum amount of unique swutching domain is supposed
to be equal RTE_MAX_ETHPORTS. Current implementation allows
to allocate only RTE_MAX_ETHPORTS-1 domains.
The definition of RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID is
changed from 0 to UINT16_MAX, the rte_eth_dev_info_get is
updated to initialize dev_ibfo structure accordingly.
Fixes: ce9250406323 ("ethdev: add switch domain allocator")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to allow smooth addition of features without breaking
ABI compatibility, some space is reserved in several core structs
of ethdev API.
The struct rte_eth_dev and rte_eth_dev_data are supposed
to be used internally only, but there is a chance that
increasing their size would break ABI for some applications.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a13 ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68ccd ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c2102 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf53 ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
