5-tuple exact Flow support for 1200 series adapters. This allows:
Attributes: ingress
Items: ipv4, ipv6, udp, tcp (must exactly match src/dst IP
addresses and ports and all must be specified).
Actions: queue and void
Selectors: 'is'
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode disabled via the UCS management interface. This allows:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
With advanced filters disabled, an IPv4 or IPv6 item must be specified
in the pattern.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
For VICs with filter tagging, support the MARK and FLAG actions
by setting appropriate mbuf ol_flags if there is a filter match.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode enabled via the UCS management interface. This enables:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue, and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Stub callbacks for the generic flow API and a new FLOW debug define.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Update the base functions for the Cisco VIC. These files are mostly
common with other VIC drivers so are left alone is as much as possible.
Includes in a new filter/action interface which is needed for Generic
Flow API PMD support. Update FDIR code to use the new interface.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Unfortunately the datasheet has a mistake. The
address of the TX error counter is wrong.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
i210 and i211 also support unicast MAC filters.
The patch was tested on i210 based hw, for i211
support was looked up in the specs.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, the FDIR programming time is +11ms on i40e.
This patch will result in an average programming time of
22usec with a max of 60usec .
Signed-off-by: Michael Lilja <ml@napatech.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Coverity issue: 144512
Coverity issue: 144513
Fixes: 9c7188a68d ("net/ark: provide API for hardware modules pktchkr and pktgen")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Check for the current MAC address on both the remote and the tap
netdevices before setting a new value.
While there, remove wrong empty lines and ensure tap_ioctl() return
value is negative, just like what is done throughout this code.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
This has three main benefits:
- tun_alloc is now generic again for any queue,
- mtu no longer needs to be handled in tap_setup_queue(),
- an actual netdevice is created as soon as the device is probed.
On top of it, code in eth_dev_tap_create() has been reworked to have a
more logical behavior; initialization can now fail if a remote is
requested but cannot be set up.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Print a detailed debug message inside tap_ioctl() directly. The caller
now only needs to check for return value.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Support for a fixed MAC address for testing with the last octet
incrementing by one for each interface defined with the new 'mac=fixed'
string on the --vdev option. The default option is still to randomize
the MAC address for each tap interface.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
mbuf next and nb_segs fields already have the default values when get
from mempool, no need to update them in PMD.
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The thunderx PMD is sensitive to the layout of the mbuf on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In mlx5_dev_start(), the spinlock isn't released when returning error.
Fixes: c8d4ee50cc ("net/mlx5: fix startup when flow cannot be applied")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
With the change in base APIs the logic for 100G handling needs to be
adjusted to pass cid values instead for queue ids. The current API
works assuming its queue id.
Fixes: 69d7ba88f1 ("net/qede/base: use L2-handles for RSS configuration")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In the main loop of mlx5_tx_burst(), pointers/indexes are advanced at the
beginning. Therefore, those should be rolled back if checking resource
availability fails and breaks the loop. And some of them are even
redundant.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In case of resource deficiency on Tx, mlx5_tx_burst() breaks the loop
without rolling back consumed resources (txq->wqes[] and txq->elts[]). This
can make application crash because unposted mbufs can be freed while
processing completions. Other Tx functions don't have this issue.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Fixes: f04f1d5156 ("net/mlx5: fix Tx WQE corruption caused by starvation")
Cc: stable@dpdk.org
Reported-by: Hanoch Haim <hhaim@cisco.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is a bug in previous fix for lsc interrupt.
lsc interrupt is not disabled before delayed handler,
that cause the delayed handler be re-entered.
Fixes: 9b66721070 ("net/ixgbe: fix blocked interrupts")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
hw->mac.ops.get_media-type() of ixgbe VF is NULL and should not
be called directly. It had better be replaced by calling
ixgbe_get_media_type( ) to avoid crash.
Fixes: c12d22f65b ("net/ixgbe: ensure link status is updated")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Laurent Hardy <laurent.hardy@6wind.com>
Add a comment documenting explicitly that we are falling through the case
statements to the next one.
Fixes: f9072f8b90 ("ixgbe: migrate flow director filtering to new API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add in a comment for each switch fall-through indicating that it is
intentional. This will fix compiler warnings with GCC 7.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
GCC 7 flags a value as uninitialized before used. While it's a false
positive, there is little harm in providing an initial value for the
variable.
Fixes: bb1d14b87f ("vmxnet3: fix link state handling")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For base code in drivers shared with other projects, disable the new
warnings from gcc 7 about unlabelled fall-through in switch statements.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
strncpy may left destination buffer not NULL terminated, switched using
snprintf to be sure destination buffer is NULL terminated.
Coverity issue: 1407495
Coverity issue: 1407498
Fixes: cc68ac4847 ("net/af_packet: support MTU change")
Fixes: 218259590e ("net/af_packet: support promiscuous")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
If mlx5_dev_start() fails, it tries to rollback data structures related to
rte_flow including drop queue. The destruction code doesn't assume the
structures are created but priv_flow_delete_drop_queue() never does sanity
check. This can cause a crash.
Fixes: 028761059a ("net/mlx5: use an RSS drop queue")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When TSO is enabled, Verbs layer aggregates the TSO
inline size with the txq inline size for the Tx creation,
while the PMD takes the maximum among them.
Fixing it by adjusting the max inline parameter before
passing to to Verbs.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
When counting max packet length from MTU, count
VLAN tag length twice for QinQ packets.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
There exists case that software sets mtu (i.e jumbo frame) of
ixgbe device when it's stopped. Before the fix, scattered_rx
is cleared during device stop, and setting jumbo frame mtu
after device stop will always fail as scattered_rx is 0.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
