Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
All drivers should have SPDX on the first line of the source
files in the format
/* SPDX-License-Identifier: ...
Several files used minor modifications which were inconsistent
with the pattern. Fix it to make scanning tools easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Until now, DPAA2 driver was configured to drop any packet which
was marked as malformed by hardware - which included those with
wrong checksum.
With this patch, that configuration has been removed - hereafter,
all packets arriving on a DPMAC link would be forwarded to a DPNI
and further processing would be done as configured for a standard
packet path.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The I/O threads for DPAA2 take their reference for bpool ID, the
port ID and other info like qdid, from the rte_eth_dev. Further,
to get this data during I/O operation, a reference of the RTE
device is kept in the queue structure (dpaa2_queue).
In case of secondary processes, rte_eth_dev is not same as the
primary process. Thus, the reference goes invalid.
This patch changes the implementation to use the dev_private
rather than the rte_eth_dev as that is shared area across
all the processes.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The DPAA2 hw can support a special offset based
configuration to program distribution on hash.
This is for all cases, which are not directly supported.
e.g. HASH based distribution on inner ip header
of a GRE tunnel.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch introduces an rte pmd API to configure dpdmux from
the application.
dpdmux can work in association with dpni as an additional
distribution capability on the NIC.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
dpdmux object is added as a part of net driver as it is used to
de-multiplex packets to separate interfaces on basis of specific rules.
These rules can be configured from the software
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch enables the population of timestamp field
in mbuf on packet receive.
It may give performance impact on LX2xxx platforms.
So, it has been made optional for Lx2xxx platform.
One shall call, rte_dpaa2_enable_ts() to enable it.
Nothing is required for LS2 and LS1088 platforms.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
In order to support I/O from secondary process, the
burst APIs and OPS APIs shall be mapped/plugged.
Fixes: c147eae01cb3 ("net/dpaa2: introduce NXP DPAA2 driver")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In case the link is down during initial link state check, messages for
link state check flood the console. Reducing the log level for these.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch adds the support to update the mbuf vlan tci field
from the HW parse results in annotation area.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Earlier the tx queue data was getting cleaned up in close
while rest of the functionality was in un-init.
Now a new func is created to free queue memory.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
various field of FD structure was getting reset in scattered
fashion. This patch align them in single macro.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch copies the flc based hw provided hash results
to the mbuf rss field for lx2 platform only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
For now, only the packet count stats per queue is available. This is
part of xstats output (though, per queue stats are actually part of
rte_eth_stats basic stats).
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Firmware would contain pre-configured devices for each DPMAC backing
a DPNI. This patch reads those MAC address when the device is
initialized and sets it. THereafter, it can be changed through API or
commands from testpmd.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
In case of LX2 we get parse result summary in FD. We do not need to
prefetch and read the annotation to fetch the parse results.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add the support for new Management Complex
Firmware version to 10.1x.x. One of the main changes in
the APIs ordered queue.
The fslmc bus lib ABI will need to be bumped to reflect
the MC FW API and structure changes.
This will also result in bumping of ABI verion of all dependent
libs as they internally use the MC FW APIs and structures.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable the VLAN filters only when requested in rx offload.
Fixes: 0ebce6129bc6 ("net/dpaa2: support new ethdev offload APIs")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The code was incorrectly using the Virtual mode, whent
the IOVA mode was set as Physical.
Fixes: 5ae1edff6895 ("dpaa2: prepare for 32-bit build")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Removing double copy of driver information. 04664e5c8346 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c8346 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Currently only one buffer pool is configured and in use,
looping for up to maxmum 8 times is unnecessary and might
be buggy as assigned uninititalized values.
The fix is to loop for the configured times with initialize
with valid values.
Fixes: 16bbc98a3e ("bus/fslmc: update MC to 10.3.x")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch fixes prefetch rx routine to
set the next prefetch request to the size of nb_pkts.
It assumes that next request would ideally be
of same size.
Fixes: 4bc5ab88dbd6 ("net/dpaa2: fix Tx only mode")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
