A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The following commit introduced several new actions. Make the dump
function to print those actions.
commit 6faf81f1d2 ("net/enic: update flow manager API")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Flow manager API includes push/pop actions, so support corresponding
DPDK flow actions.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
1400 series adapters support multiple MARK and FLAG action types.
e.g.: mark id 10 / queue index 2 / mark id 11 / queue index 3
Remove the restriction in the Flow Manager implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Support rte_flow RSS action on outer headers (level 0). RSS ranges on
the non-default port is OK.
Restrictions:
- The RETA is ignored. The hash function is simply applied across
the RSS queue range.
- The queues used in the RSS group must be sequential.
- There is a performance hit if the number of queues is not a power
of 2.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Each RTE RQ is represented on enic as a Start Of Packet (SOP) queue
and overflow queue (DATA). There were arranged SOP0/DATA0, SOP1/DATA1,..
But need to be arranged SOP0, SOP1,..., DATA0, DATA1... so that
rte_flow RSS queue ranges work.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Update the VIC Flow Manager API. The extensions will allow support for:
- Decap and strip VLAN
- Remove outer VLAN
- Set Egress port
- Set VLAN when replicating encapped packets
- RSS queue ranges on outer header
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The current implementation produces wrong ordering for several cases
like these:
1. mark, decap, steer
Current: steer, mark, decap
Correct: mark, steer, decap
2. decap, steer, steer
Current: steer, steer, decap
Correct: steer, decap, steer
Simplify the logic and swap 1st steer and decap.
Also, allow just one decap action per flow.
Fixes: ea7768b5bb ("net/enic: add flow implementation based on Flow Manager API")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This is a helper function in case components would like to do more work
than just logging a message based on log level, like for example
collecting some stats if the log type is DEBUG etc..
A few existing relevant usage converted to this new API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Use the RTE_MIN and RTE_MAX macros instead of private macros.
Fixes: aae7dd40cd ("net/enic: move min/max macros")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Move a macro from a widely included header file to a header file
used only by the one caller of the macro.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
There were defines which originally allowed sharing of some code with
the enic kernel driver. The code has long since diverged and now the
abstraction just makes the code harder to read. Mostly mechanical
replacement of defines and reformatting.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Use the memzone namesize, Ethernet address length defines from the RTE
header files instead of locally defined versions.
Use the RTE byte swap functions instead of the x86 specific locally
defined versions.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
By default RSS hash delivery (offload) is bound to RSS mode and
it is incorrect to advertise it as enabled if Rx multi-queue mode
has no RSS.
Fixes: 8b945a7f7d ("drivers/net: update Rx RSS hash offload capabilities")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When INTx is used, the interrupt handler needs to explicitly re-enable
interrupt in order to receive another one in future. The LSC interrupt
handler currently does not, and the link state never gets updated when
INTx is used (e.g. uio_pci_generic). Call rte_intr_ack() at the end of
the handler, to re-enable INTx.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Do not log errors when CMD_OVERLAY_OFFLOAD_CTRL and
CMD_GET_SUPP_FEATURE_VER fail, as they are only used to probe if a
feature is provisioned. They are expected to fail if the feature is
not provisioned.
Do not log an error when disabling Geneve offload fails. It is
expected to fail if this feature is provisioned but not enabled.
Fixes: c02a96fc4a ("net/enic: enable GENEVE with options offload")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
VFs all have subsystem ID 0. VIC models with the latest VF are at
least 40G, so report that as a more reasonable speed than 10G.
Fixes: 57bb45b37b ("net/enic: add PCI id for new virtual function")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a space between the function name and message.
Fixes: bbd8ecc054 ("net/enic: remove PMD log type references")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The VXLAN related definitions and structures are moved from
rte_ether.h to a new header file: rte_xvlan.h.
Also introducing a new define macro for VXLAN default port id:
RTE_VXLAN_DEFAULT_PORT
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Flow Manager API is the new firmware interface that exposes match
action capabilities in 1400 series VIC adapters. It is intended for
virtual switch offloads and enables more advanced features than the
existing filter API. For example, it supports VXLAN encap and decap
actions, and exposes TCAM and exact match tables.
Add the new flow implementation using Flow Manager and use it when
available. When Flow Manager is not available, the driver will
continue to use the old filter-based flow implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Both primary and secondary processes may call the queue start/stop,
link update handlers. These functions use the rte_eth_dev pointer
cached in the adapter private data (struct enic). But, this pointer is
valid only in the primary process, as rte_eth_dev addresses may differ
in different processes. Using that cached pointer in secondary
processes leads to a crash.
For the link update handler (enic_link_update), use the rte_eth_dev
pointer passed down from the rte layer as it is valid in the current
process. For the queue start/stop handlers (enic_start_wq and
friends), cache the rte_eth_dev_data pointer in the adapter private
data, and use that. rte_eth_dev_data is in shared memory and its
address is same across processes.
Fixes: 837e68ae94 ("net/enic: fix queue stop and start")
Fixes: cf8d9826b7 ("net/enic: extract code for checking link status")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Only the primary process initializes the adapter private data and
rte_eth_dev_data. For secondary processes, do not touch them.
Secondary processes need to select the right Tx and Rx handlers. Pick
the same handlers that the primary process uses.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Probe for the PCI ID of a new mode of VF which will be added to VIC
adapter firmware. When fully implemented, the new mode will operate
independent of the Cisco Virtual Machine Fabric Extender (VM-FEX) and
will not need to be provisioned through libvirt. The new mode is dubbed
"Standalone vNic" mode or "SN" mode.
Also, minor formatting changes.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Prior to the fix, RTE_LOGTYPE_INFO messages were displayed by default.
After the fix, only NOTICE level and higher were displayed by default
and INFO level were not. There are INFO level vNIC config related
messages which customers and tech support currently depend on for
debugging and so on and to suddenly hide these messages is not a good
idea.
This patch changes the default log level to RTE_LOG_INFO for enic so
messages are printed as before the fix.
Fixes: bbd8ecc054 ("net/enic: remove PMD log type references")
Signed-off-by: John Daley <johndale@cisco.com>
Don't use RTE_LOGTYPE_PMD as it is too general.
Also, just use 1 log type for all of enic PMD (pmd.net.enic)
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
There is no requirement for thread safety in the flow PMD code and no
need for the locks.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The firmware in 1400 series VIC adapters which would support COUNT
flow action was postponed and reworked. The capability will be
re-added in a future release when the firmware is available.
This reverts the following commits.
commit 86df6c4e2f ("net/enic: support flow counter action")
commit 1b4ce87dc5 ("net/enic: fix counter action")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Available link speeds are based on VIC adapter model, which is encoded
in PCI subsystem device ID.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
These values correspond to those used in the MTU handler (enic_set_mtu).
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The device private pointer (dev_private) is of type void *
therefore no cast is necessary in C.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>