Add a helper to iterate all lcores.
The iterator callback is read-only wrt the lcores list.
Implement a dump function on top of this for debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK components and applications can have their say when a new lcore is
initialized. For this, they can register a callback for initializing and
releasing their private data.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The test checks that the service may be active API works
when there are two cores: a non-service lcore and a service one.
The API notes to take care when checking the status of a running
service, but the test setup allows for a safe usage in that case.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This commit fixes the setting of relative rpath on dpdk-test for
drivers ($libdir/dpdk/pmd-$abiver) to the correct absolute rpath
($prefix$libdir/dpdk/pmd-$abiver).
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RTE_TRACE_POINT_DEFINE and RTE_TRACE_POINT_REGISTER must come in pairs.
Merge them and let RTE_TRACE_POINT_REGISTER handle the constructor part.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The node library had a need of being linked as a whole
to make some constructors effective.
Now that all libraries are linked with --whole-archive,
there is no need to have this library separate.
Fixes: e2db26f766 ("build: always link whole DPDK static libraries")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Rename test_ring_peek_stress to test_ring_mt_peek_stress to
keep same naming conventions for ST and MT test cases.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test ST peek API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Rework test code to reduce code complexity for the compiler and
bring down compilation time and memory consumption.
Current test_ring_enqueue/test_ring_dequeue functions contain
too many branches and it takes compiler a lot of effort to resolve all
of them at compile time.
So the patch replaces these branchy function invocations
with an array of function pointers (test_enqdeq_impl[]).
That way compiler knows straightway which function to use
for each particular case.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
To ensure all constructors are included in static build, we need to pass
the --whole-archive flag when linking, which is used with the
"link_whole" meson option. Since we use link_whole for all libs, we no
longer need to track the lib as part of the static dependency, just the
path to the headers for compiling.
After this patch is applied, all DPDK .a files are inside
--whole-archive/--no-whole-archive flags, but external dependencies and
shared libs being linked against remain outside.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If the bonding pmd is disabled, all autotest associated with it should be
disabled. However, some of those tests also depended upon the ring PMD so
were placed in a block depending on that driver - and unfortunately that
driver alone. This caused build failures if the ring PMD was enabled but
the bonding PMD disabled, due to missing header files and driver libs.
This error can be reproduced by configuring DPDK using e.g.
meson configure -Ddisable_drivers=net/[!r]* build
(which will disable all drivers not starting with "r"), and then building
using ninja.
Fix this by moving all link bonding autotests to the one block and putting
a second conditional check within that block for those also requiring the
ring PMD.
Fixes: 7f6ef16640 ("test/bonding: allow disabling driver")
Fixes: 207b1c813f ("test: fix build without ring PMD")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
In size 32 bulk ring enq/dequeue performance test, the "Total count"
statistics is incorrect. For example, running the test on lcore 25 and
lcore 26, the output is as follows:
The test command:
$sudo ./arm64-armv8a-linuxapp-gcc/app/test -l 25-26
RTE>>ring_perf_autotest
Bulk enq/dequeue count on size 32
Core [25] count = 288268
Core [26] count = 288281
Total count (size: 32): 1066323
Fixed it by reset the counter at the beginning of each loop. The
revised output is as follows:
Bulk enq/dequeue count on size 32
Core [25] count = 285643
Core [26] count = 285688
Total count (size: 32): 571331
Fixes: 759cf9b563 ("test/ring: enhance mp/mc coverage")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Caught by code review, bitops test name is incorrect.
Fixes: 7660614c11 ("test/bitops: add bit operations test case")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
To fill the gap with linux kernel eBPF implementation,
add support for two non-generic instructions:
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
which are used to access packet data.
These instructions can only be used when BPF context is a pointer
to 'struct rte_mbuf' (i.e: RTE_BPF_ARG_PTR_MBUF type).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Address for few small issues:
- unreachable return statement
- failed test-case can finish with 'success' status
Also use unified cmp_res() function to check return value.
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add test cases for setting bit, clearing bit, testing
and setting bit, testing and clearing bit operation.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Both bitratestats_autotest latency test initializes the metrics library.
It should be cleaned during exit.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The test case - test_stats is directly accessing the
cryptodev and its dev_ops which are internal to library
and should not be used directly by the application.
However, the test case is also missing to check for the
error ENOTSUP. It should skip the case if the API returns
ENOTSUP. This patch fixes these two issues.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev doesn't limit the number of descriptors that can be supported
by the PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This is testpmd part of new line cleanup.
Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
dev info is set but not used in
test_queue_pair_descriptor_setup().
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
In test_queue_pair_descriptor_setup() and
test_device_configure_invalid_queue_pair_ids a QAT specific
check is there, however the test case can be run on any PMD.
Hence removed the unnecessary check.
test_queue_pair_descriptor_setup and
test_device_configure_invalid_queue_pair_ids execution
need to be altered as the valid device values should be
configured in the end so that all other tests can be
executed.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
dpaa_sec and dpaa2_sec PMDs can run generic
cryptodev_testsuite. Hence removing the specific
test suites.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
cryptodevs which support rte_security PDCP protocol,
can run all PDCP cases if it sets a feature flag
RTE_CRYPTODEV_FF_SECURITY. Previously, only dpaa2_sec
and dpaa_sec test suites were running these tests.
Now it is moved to generic test suite with a check
on the feature flag and the case will be skipped if it
is not supported by the PMD.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported feature.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
There were some PMD specific checks to skip the case if
it is not supported. This patch checks the feature flag
RTE_CRYPTODEV_FF_SYM_SESSIONLESS if PMD supports it or not.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Checked the PMD feature flag list to identify if
inplace or OOP SGLs are supported or not. If not supported
the cases are skipped.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Skipped the test cases for the PMDs which do not support
RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA and subsequently
removed the PMD specific checks for running that case.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported features. For other return values like -EINVAL
or -ENOMEM the test can be treated as failure.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For null cipher the iv length should be set to zero.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
After re-enabling checks for non-implemented ops in non-debug mode
in librte_security set_pkt_metadata and get_userdata functions,
tests verifying proper work of tests can be enabled also.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add new test-case to measure performance of
IPsec data-path functions.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit fixes failures of the flow_classify_autotest when
ran on dual-socket servers, as the sample application does not
support more than a single socket. Increasing the NB_SOCKETS
value allows the test to run successfully.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The autotest application build was partially enabled for building with
the net/bond driver disabled, but a number of items were missed, leading
to build errors when the driver was disabled, e.g. by simply doing
"-Ddisable_drivers=net/*" when calling meson.
../app/test/test_link_bonding.c:25:10: fatal error: rte_eth_bond.h: \
No such file or directory
With this fix in place, it's possible to build DPDK with meson with all
non-bus, non-mempool drivers disabled i.e. using meson option
-Ddisable_drivers=baseband/*,compress/*,crypto/*,event/*,net/*,raw/*,vdpa/*
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
The size checking is done in the caller. The size parameter is an
unsigned (64b wide) right now, so the comparison with zero should be
enough in most cases. But it won't help in the following case.
If the allocating request input a huge number by mistake, e.g., some
overflow after the calculation (especially subtraction), the checking
in the caller will succeed since it is not zero. Indeed, there is not
enough space in the system to support such huge memory allocation.
Usually it will return failure in the following code. But if the
input size is just a little smaller than the UINT64_MAX, like -2 in
signed type.
The roundup will cause an overflow and then "reset" the size to 0,
and then only a header (128B now) with zero length will be returned.
The following will be the previous allocation header.
It should be OK in most cases if the application won't access the
memory body. Or else, some critical issue will be caused and not easy
to debug. So this issue should be prevented at the beginning, like
other big size failure, NULL pointer should be returned also.
Fixes: fdf20fa7be ("add prefix to cache line macros")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit adds a basic test to check the cycle cost
of related to calling into a service.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
The functions added in this patch will make it easier for telemetry
to convert data to correct JSON responses to telemetry requests.
Tests are also added for these json utility functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Invert the current trace point headers logic by making
rte_trace_point_register.h include rte_trace_point.h.
There is no more need for a RTE_TRACE_POINT_REGISTER_SELECT special macro
since including rte_trace_point_register.h itself means we want to
register trace points.
The unexplained "provider" notion is removed from the documentation and
rte_trace_point_provider.h is merged into rte_trace_point.h.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unit test framework to create and test performance of various
graph models.
example command to test:
echo "graph_perf_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding the unit test to test the functionality of node and graph APIs.
Testing includes registering a node, cloning a node, creating a graph,
perform graph walk, collecting stats and all node and graph debug APIs.
example command to test:
echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Implement rte_hash_lookup_with_hash_bulk_data() and
rte_hash_lookup_with_hash_bulk() - bulk lookup
functions with precomputed hash signatures.
Add these two functions into performance tests.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
