TSO should be set if either of the TSO offload flags is requested.
Fixes: dbccb4cddc ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Igb has a bug about queue index for rss rule flow configuration
when set redirection table.
Fixes: 424ae915ba ("net/e1000: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add support the set_mc_addr_list device operation in the i40evf PMD.
The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
I40e needs a protection for rss rule flow configuration
after a rule is set for a port.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support of choice the preferred firmware variant to use in device
parameters.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When user reissues same flow director cmd with a different queue
update the existing filter to redirect flow to the new desired
queue as destination just like the other filters like 5 tuple and
generic flow.
Fixes: 2d64da097a ("net/bnxt: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The 'opaque' pointer in handler function is the last argument
of sfc_kvargs_process() function and it is pointer to the adapter
'evq_flags' that has a uint32_t type. So 'value' must be pointer
to uint32_t.
Fixes: c22d3c508e ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Device must be started before start any queue.
Fixes: 0748be2cf9 ("ethdev: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
"struct rte_eth_rxtx_callback" is defined as internal data structure and
used as named opaque type.
So the functions that are adding callbacks can return objects in this
type instead of void pointer.
Also const qualifier added to "struct rte_eth_rxtx_callback *" to
protect it better from application modification.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This change updates the AVP driver to conform with the new ethdev
offload API. As per these commits:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")'
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")'
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Unlike ffs() rte_bsf32() counts bit position from 0.
Fixes: 0c7a0c35f2 ("net/sfc: calculate Rx buffer size which may be used")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When the vnic_tpa_cfg HWRM command is sent to the FW,
we are not passing the VNIC ID in case of disable.
This can cause the FW to return an error.
Correct VNIC ID needs to be passed for both enable and disable.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Dynamic log types are registered on RTE_INIT() step.
This allows one to set log levels by EAL options on
application launch. However, this does not allow to
manage log types if they are created during runtime.
EAL does not store log levels and types passed from
the command line. Thus, they cannot be picked later.
This is an obvious flaw since it would be better to
be able to pick levels for dynamic types registered
for runtime-determined facilities such as NIC ports.
This patch provides a mechanism to store log levels
passed from EAL options and adds an API to register
log types and pick levels from the internal storage.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Verbs specification doesn't help to distinguish between packets having an
VLAN and those which do not have, this ends by having flow rule which does
not react as the user expects e.g.
flow create 0 ingress pattern eth / vlan / end action queue index 0 / end
flow create 0 ingress pattern eth / end action queue index 1 / end
are colliding in Verbs definition as in both rule are matching packets with
or without VLAN.
For this reason, the VLAN specification must not be empty, otherwise the
PMD has to refuse it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Fill the error context in conversion function to provide a better reason on
why it cannot be done to the user.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Packet matching inner and outer flow rules are caught by the first one
added in the device as both flows are configured with the same priority.
To avoid such situation, the inner flow can have an higher priority than
the outer ones as their pattern matching will otherwise collide.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Wait to complete is present to let the application get a correct status
when it requires it, it should not be ignored.
Fixes: e313ef4c2f ("net/mlx5: fix link state on device start")
Fixes: cb8faed7dd ("mlx5: support link status update")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This behavior is mixed between what should be handled by the application
and what is under PMD responsibility.
According to DPDK API:
- link_update() should only query the link status [1]
- link_set_{up,down}() should only set the link to the according status [1]
- dev_{start,stop}() should enable/disable traffic reception/emission [2]
On this PMD, the link status is retrieved from the net device associated
owned by the Linux Kernel, it does not means that even when this interface
is down, the PMD cannot send/receive traffic from the NIC those two
information are unrelated, until the physical port is active and has a
link, the PMD can receive/send traffic on the wire.
According to DPDK API, calling the rte_eth_dev_start() even when the Linux
interface link is down is then possible and allowed, as the traffic will
flow between the DPDK application and the Physical port.
This also means that a synchronization between the Linux interface and the
DPDK application remains under the DPDK application responsibility.
To handle such synchronization the application should behave as the
following scheme, to start:
rte_eth_get_link(port_id, &link);
if (link.link_status == ETH_DOWN)
rte_eth_dev_set_link_up(port_id);
rte_eth_dev_start(port_id);
Taking in account the possible returned values for each function.
and to stop:
rte_eth_dev_stop(port_id);
rte_eth_dev_set_link_down(port_id);
The application should also set the LSC interrupt callbacks to catch and
behave accordingly when the administrator set the Linux device down/up.
The same callbacks are called when the link on the medium falls/raise.
[1] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev_core.h
[2] https://dpdk.org/browse/dpdk/tree/lib/librte_ether/rte_ethdev.h#n1677
Fixes: c7bf62255e ("net/mlx5: fix handling link status event")
Fixes: e313ef4c2f ("net/mlx5: fix link state on device start")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Kernel version check was introduced in
commit 3a49ffe38a ("net/mlx5: fix link status query")
due to a bug fixed by
commit ef09a7fc76 ("net/mlx5: fix inconsistent link status query")
This patch restore the previous behavior as described in Linux API.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
rdma-core v16 has a bug. The following compilation error occurs on ARM
hosts.
In file included
from drivers/net/mlx5/mlx5_glue.h:16:0,
from drivers/net/mlx5/mlx5_glue.c:11:
/usr/include/infiniband/mlx5dv.h:144:2: error: unknown type name 'off_t'
off_t uar_mmap_offset;
^
As a temporary fix, sys/types.h is included in PMD. This has been fixed in
rdma-core v17. This can be removed when all the Linux distros are shipped
with rdma-core v17 or back-ported fix. As of now, RedHat 7.5 is known to
have rdma-core v16.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no guarantee that the file won't be removed by external
user/application between the stat() and remove() syscalls, remove() will
fail if the file no longer exists.
Fixes: f8b9a3bad4 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
These functions return int although they are not supposed to fail,
resulting in unnecessary checks in their callers.
Some are returning error where is should be a boolean.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.
At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In priv struct only the memory region needs to be protected against
concurrent access between the control plane and the data plane.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Some empty lines have been added in the middle of the code without any
reason. This commit removes them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replaces all (void)foo; by __rte_unused macro except when variables are
under #if statements.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
priv_get_num_vfs() was used to help the PMD in prefetching the mbuf in
datapath when the PMD was behaving in VF mode.
This knowledge is no more used.
Fixes: 528a9fbec6 ("net/mlx5: support ConnectX-5 devices")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since filling hardware buffer pool (bpool) is Rx related
constant describing maximum number of rx descriptors
instead of maximum number of Tx descriptors should be used.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Show appropriate log message in case Tx offloads are either
not supported or missing.
Fixes: 7d8f6c20cc ("net/mrvl: switch to the new Tx offload API")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Allow TAP PMD to pass user desired MAC address as argument.
The argument value is processed as string delimited by ':',
is parsed and converted to HEX MAC address after validation.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Previously all null devices were getting MAC address "00:00:00:00:00:00"
After attaching two Null device to OVS, seeing "00.00.00.00.00.00" mac
address for both null devices.
Fix this issue, by setting different mac address.
Signed-off-by: Mallesh Koujalagi <malleshx.koujalagi@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
