qede PMD does not support SR-IOV PF driver functionality, so
max_vfs is set to 0 to imply the same.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch includes the following:
- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
instead make use of existing RSS APIs for default RSS configuration
Fixes: 6d9e26c42c ("net/qede: get RSS hash configuration")
Fixes: 9c5d0a669f ("net/qede: fix RSS")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Update the version of shared codes to cid-ixgbe.2016.11.21.tar.gz,
All files in net/ixgbe/base are developed by another team and
DPDK PMD uses them accordingly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).
Signed-off-by: Wei Dai <wei.dai@intel.com>
This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch adds Energy Efficient Ethernet (EEE) support for
some Marvell PHYs on some future platforms.
Because EEE capability or status was not indicated previously,
this patch simply assumes that it is supported.
As soon as there is a PHY that does not support EEE, there will
be defects in this area because the driver will not report the
EEE status correctly.
This also deletes some now-unused definitions from an earlier
Marvell PHY implementation and combines a device ID check into a
switch statement.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes the flow control conversion from Rx and Tx to pause
and asymmetric pause, as that is handled by the ixgbe_negotiate_fc().
Performing the conversion prior to ixgbe_negotiate_fc() results in
an incorrect fc mode if Rx only pause is selected when the link partner
is advertising Tx.
Signed-off-by: Wei Dai <wei.dai@intel.com>
ixgbe_read_i2c_combined_generic_int() is only used by devices >= X550.
Set the initial value accordingly and remove the MAC type check.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The "FW" PHY type now supports speeds 10M, 100M, and 1G.
Previously, only the 1G speed was reported for this PHY type.
Add reporting 10M and 100M speed options.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch moves some of the extended speeds that come with X552
(5G, 2.5G, 10M) into the link check functions.
It also now returns speed_unknown for speeds that are not known
how to interpret.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Read and store NW_MNG_IF_SEL register because register fields are
used to determine SGMII link for busy SGMII register reads.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Update ixgbe_setup_phy_link_generic that set/unset auto-negotiation.
Ensure that unsupported auto-negotiation speeds are unset.
This is necessary since the PHY NVM may advertise unsupported speeds.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Fix ixgbe_setup_sgmii_m88 to set lane speed to autoneg instead of 1G
to prevent problems with link between PHYs
Fixes: d4b4c68454 ("net/ixgbe/base: add X550em_a FW ALEF support")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Return correct physical layer for some x550 devices.
Fixes: 76d5b807ff ("ixgbe/base: new X557 phy")
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Signed-off-by: Wei Dai <wei.dai@intel.com>
The MAC register NW_MNG_IF_SEL fields have been redefined for X553.
These changes impact the iXFI driver code flow. Since iXFI is only
supported in X552, this patch adds X552 MAC check for iXFI flows.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Enable the Link Alarm Status Interrupt (LASI) only for X552 devices
to receive notifications of the link configurations of the external
PHY and correspondingly support the configuration of the internal
iXFI link, since iXFI does not support auto-negotiation.
This is not required for X553 devices having KR support, which
performs auto-negotiations and which is used as the internal
link to the external PHY.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The variable checksum_last_word is used only for bounds check.
So remove this variable and use IXGBE_EEPROM_CHECKSUM directly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add support to get the link active LED index via the LEDCTL register.
If the LEDCTL register does not have link active LED set then
use MAC default LED index.
Link active LED is used for adapter identify/blink support.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch cleans up the code and clarifies the comment around
the X557 PHY link status check in ixgbe_check_link_t_x550em().
Signed-off-by: Wei Dai <wei.dai@intel.com>
Method to identify the CS4223/CS4227 is incorrect and unreliable.
Provide a new register to differentiate between these PHY SKUs.
Fixes: fc0559bdb5 ("net/ixgbe/base: add link MAC setup for X550a SFP+")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Devices that cannot go 10G speeds can safely select a faster
Management Data Input/Output (MDIO) speed.
Select fast MDIO clock speed for for those devices.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Receive Address Register (RAR) entries, including SAN MAC address,
are cleared when VMDq pool bits are cleared.
Prevent SAN MAC address to be cleared.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
PHY type ixgbe_phy_x550em_ext_t requires different check
to verify reset status.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
NFP supports more speeds than just 40 and 100GB, which were
what was advertised before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Previous reported speed was hardcoded because there was not firmware
support for getting this information. This change needs also to support
old firmware versions, but instead of the previous hardcoded report, no
speed is reported to the user avoiding to give the wrong speed when link
is not configured to 40G.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Because macros for TCP and UDP related to offload cksums have
same values, this was not a main problem. But better to use the
right ones.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Our use case is that we have an app that needs to keep mbufs around
for a while. We've seen cases when calling vmxnet3_post_rx_bufs() from
vmxet3_recv_pkts(), it might not succeed to add any mbufs to any RX
descriptors (where it returns -err). Since there are no mbufs that the
virtual hardware can use, no packets will be received after this; the
driver won't refill the mbuf after this so it gets stuck in this
state. I call this a deadlock for lack of a better term - the virtual
HW waits for free mbufs, while the app waits for the hardware to
notify it for data (by flipping the generation bit on the used Rx
descriptors). Note that after this, the app can't recover.
This fix is a rework of this patch by Marco Lee:
http://dpdk.org/dev/patchwork/patch/6575/. I had to forward port
it, address review comments and also reverted the allocation
failure handling to the first version of the patch
(http://dpdk.org/ml/archives/dev/2015-July/022079.html), since
that's the only approach that seems to work, and seems to be what
other drivers are doing (I checked ixgbe and em). Reusing the mbuf
that's getting passed to the application doesn't seem to make
sense, and it was causing weird issues in our app. Also, reusing
rxm without checking if it's NULL could cause the code to crash.
Fixes: 14680e3747 ("vmxnet3: improve Rx performance")
Signed-off-by: Stefan Puiu <stefan.puiu@gmail.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
