In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails,
'stats' is uncertainty value. The display result will be abnormal.
This patch check the return value of 'rte_eth_stats_get' to avoid
display abnormal stats.
Fixes: 53324971a1 ("app/testpmd: display/clear forwarding stats on demand")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Whether the RSS is enabled depends on RTE_ETH_MQ_RX_RSS_FLAG and packet
tuple are enabled. So the RSS switch is unnecessary.
Fixes: 5e782bc257 ("net/hns3: fix configuring RSS hash when rules are flushed")
Fixes: fd81968387 ("net/hns3: fix configuring device with RSS enabled")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The RTE_ETH_MQ_RX_RSS_FLAG flag is a switch to enable RSS. If the flag
is not set in dev_configure, RSS will be not configured and enabled.
However, RSS hash and reta can still be configured by ethdev ops to
enable RSS if the flag isn't set. The behavior is inconsistent.
Fixes: 99a2dd955f ("lib: remove librte_ prefix from directory names")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The 'rss_tuple_fields' in struct struct hns3_rss_conf::rss_tuple_sets is
redundant. Because the enabled RSS tuple in PMD is already managed by
the 'types' in struct hns3_rss_conf::conf. This patch removes this
redundant variable.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The RSS tuple isn't restored when RSS key length is invalid or setting
algo key failed. This patch fixes it.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, hns3 PMD disable RSS by resetting redirection table when user
set rss_hf to 0 so as to all packets go to queue 0. The implementation
may cause following problems:
1) the same type packet may go to different queue on the case of
disabling all tuples and partial tuples. The problem is determined by
hardware design.
2) affect the configuration of redirection table and user experience.
For hns3 hardware, the packets with RSS disabled are always go to the
queue corresponding to first entry of the redirection table. Generally,
disable RSS should be implemented by disabling all tuples, This patch
fix the implementation.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the hns3 PMD may free more mbufs than free_cnt parameter,
this is an incorrect implementation. This patch fixes it.
Fixes: 0b77e8f3d3 ("net/hns3: optimize Tx performance")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Some fields in the end of 'struct hns3_rx_queue' and
'struct hns3_tx_queue' are not accessed in the I/O path.
But these fields may be accessed in other threads, which may lead to the
problem of cache pseudo-sharing of IO threads. This patch add a
cacheline alignment to avoid it.
Fixes: 9261fd3caf ("net/hns3: improve IO path data cache usage")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The MAC and queues statistics are 32-bit registers in hardware. If
hardware statistics are not obtained for a long time, these statistics
will be overflow.
So PF and VF driver have to periodically obtain and save these
statistics. Since the periodical task and the stats API are in different
threads, we introduce a statistics lock to protect the statistics.
Fixes: 8839c5e202 ("net/hns3: support device stats")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Clearing imissed registers in PF hardware depends on the
'drop_stats_mode' in struct hns3_hw. The variable is initialized after
the "hns3_get_configuration". But, in current code, the clearing
operation runs before the function.
So this patch fixes this order. In addition, this patch extracts a
public function to initialize and uninitialize statistics to improve the
maintainability of these codes.
Fixes: 3e9f3042d7 ("net/hns3: add imissed packet stats")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
rte_pmd_tun/tap_probe() allocates pmd->intr_handle in eth_dev_tap_create()
and it should not be freed until rte_pmd_tap_remove() is called.
Inspection of tap_rx_intr_vec_set() shows that the call to
tap_tx_intr_vec_uninstall() was calling rte_intr_instance_free() but
tap_tx_intr_vec_install() can then be immediately called, and this then
uses pmd->intr_handle without it being reallocated.
Move rte_intr_instance_free() call from tap_tx_intr_vec_uninstall()
to rte_pmd_tap_remove().
Fixes: d61138d4f0 ("drivers: remove direct access to interrupt handle")
Cc: stable@dpdk.org
Signed-off-by: Quentin Armitage <quentin@armitage.org.uk>
Reviewed-by: David Marchand <david.marchand@redhat.com>
All slaves will be stopped and removed when closing a bonded port.
But the while loop can not end if both rte_eth_dev_stop and
rte_eth_bond_slave_remove fails, runs infinitely.
This is because the skipped slave port counted in both function failures
but it should be counted only one.
Fixing by not continue to process in the loop after first failure.
Fixes: fb0379bc5d ("net/bonding: check stop call status")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When stopping a bonded port, all slaves should be stopped. But only
active slaves are stopped.
So fix by stopping all slave ports and later do "deactivate_slave()" for
active slaves.
Fixes: 0911d4ec01 ("net/bonding: fix crash when stopping mode 4 port")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Implement support for the power management API by implementing a
'get_monitor_addr' function that will return an address of an RX ring's
status bit.
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support configuration of unicast and multicast promisc on dcf.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add API "dev_supported_ptypes_get" to DCF, that DCF pmd can get
ptypes through the new API.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
add API "mtu_set" to dcf, and it can configure the port mtu through
cmdline.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for ops rte_eth_tx_done_cleanup in dcf
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS HASH should be updated and queried by application,
Add related ops ('.rss_hash_update', '.rss_hash_conf_get') for DCF.
Because DCF doesn't support configure RSS HASH, only HASH key can be
updated within ops '.rss_hash_update'.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS RETA should be updated and queried by application,
Add related ops ('.reta_update', '.reta_query') for DCF.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In this patch, We use CPU ticks instead of HW register
to determine whether low 32 bits timestamp has turned
over. It can avoid requesting register value frequently
and improve receiving performance.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Dump Rx timestamp value into dynamic mbuf field by flex descriptor.
This feature is turned on by dev config "enable-rx-timestamp".
Currently, it's only supported under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add new ops and structures to support VF to support Rx timestamp
on flex descriptor.
"VIRTCHNL_OP_1588_PTP_GET_CAPS" ops is sent by the VF to request PTP
capabilities and responded by the PF with capabilities enabled for
that VF.
"VIRTCHNL_OP_1588_PTP_GET_TIME" ops is sent by the VF to request
the current time of the PHC. The PF will respond by reading the
device time and reporting it back to the VF.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add recommended matching list for ice PMD in DPDK 22.03.
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Remove the limitation that max queue pair number must be 2^n.
With this patch, even on a 8 ports device, the max queue pair
number increased from 128 to 254.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenjun Wu <wenjun1.wu@intel.com>
The 'max_rx_pktlen' value was previously read from hardware, which was
set by the running firmware. This caused confusion due to different
meanings of 'MAX_MTU'. This patch updates the 'max_rx_pktlen' to the
maximum value that the NFP NIC can support. The 'max_mtu' value that is
read from hardware, is assigned to the 'dev_info->max_mtu' variable.
If more layer 2 metadata must be used, the firmware can be updated to
report a smaller 'max_mtu' value.
The constant defined for NFP_FRAME_SIZE_MAX is derived for the maximum
supported buffer size of 10240, minus 136 bytes that is reserved by the
hardware and another 56 bytes reserved for expansion in firmware. This
results in a usable maximum packet length of 10048 bytes.
Signed-off-by: Walter Heymans <walter.heymans@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Richard Donkin <richard.donkin@corigine.com>
In order to speed-up the device suspend and resume, make the statistics
counters persistent in reconfiguration until the device gets removed.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch supports device cleanup callback API which is called when
the device is disconnected from the VM. Cached resources like VM MR and
VQ memory are released.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
During device suspend and resume, resources are not changed normally.
When huge resources were allocated to VM, like huge memory size or lots
of queues, time spent on release and recreate became significant.
To speed up, this patch reuses resources like VM MR and VirtQ memory if
not changed.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To speed up device resume, create reuseable resources during device
probe state, release when device is removed. Reused resources includes
TIS,
TD, VAR Doorbell mmap, error handling event channel and interrupt
handler, UAR, Rx event channel, NULL MR, steer domain and table.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When Qemu suspends a VM, HW notifier is un-mmapped while vCPU thread may
still be active and write notifier through kick socket.
PMD kick handler thread tries to install HW notifier through client
socket. In such case, it will timeout and slow down device close.
This patch skips HW notifier install if VQ or device in middle of
shutdown.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In Ctrl+C handling, sometimes kick handling thread gets endless EGAIN
error and fall into dead lock.
Kick happens frequently in real system due to busy traffic or retry
mechanism. This patch simplifies kick firmware anyway and skip setting
hardware notifier due to potential device error, notifier could be set
in next successful kick request.
Fixes: 62c813706e ("vdpa/mlx5: map doorbell")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch ensures virtqueue metadata are not being
modified while rte_vhost_vring_call() is executed.
Fixes: 6c299bb732 ("vhost: introduce vring call API")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Some message handlers do not expect any file descriptor attached as
ancillary data.
Provide a common way to enforce this by adding a accepts_fd boolean in
the message handler structure. When a message handler sets accepts_fd to
true, it is responsible for calling validate_msg_fds with a right
expected file descriptor count.
This will avoid leaking some file descriptor by mistake when adding
support for new vhost user message types.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Move message handler description and callbacks into a single array and
remove unneeded VHOST_USER_MAX and VHOST_SLAVE_MAX enums.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
By default, TSO feature should be disabled because it requires
application's support to be functional as mentioned in the
documentation.
However, if "tso" devarg was not specified, the feature did
not get disabled.
This patch fixes this issue, so that TSO is disabled, even if
"tso=0" is not passed as devarg.
Fixes: e289400669 ("net/vhost: support TSO disabling")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Those optimisations were only enabled with make builds, fix the meson
part.
Fixes: 77d66da838 ("net/virtio: add vectorized packed ring Rx")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In async data path, call rte_vhost_async_get_inflight_thread_unsafe()
API to directly return the number of in-flight packets instead of
maintaining a local variable.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In async data path, when vring state changes or device is destroyed,
it is necessary to know the number of in-flight packets in DMA engine.
This patch provides a thread unsafe API to return the number of
in-flight packets for a vhost queue without using any lock.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
