Added TruFlow hash API for common hash uses across TruFlow
core functions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
'port_id' storage size should be 'uint16_t', the API
'rte_pmd_dpaa_set_tx_loopback()' has it as 'uint8_t' but fixing it is an
ABI breakage, that is why planning the fix in v20.11 release where ABI
breakage is allowed.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
This patch updates 20.08 release notes inside
the part that describe changes in Intel QuickAssist PMD.
Fixes: faa57df0b458 ("crypto/qat: support ChaCha20-Poly1305")
Fixes: 9904ff684981 ("common/qat: improve multi-process handling")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This adds pci detection and documentation for Intel GEN2
QuickAssist device 200xx (PF Did 0x18ee, VF Did 0x18ef).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add generic mlx5 PCI PMD layer as part of existing common_mlx5
module. This enables multiple classes (net, regex, vdpa) PMDs
to be supported at same time.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Update the release notes of mlx5 PMD part by adding the
support of eCPRI.
Update the firmware configuration in the mlx5 NIC guide to support
the usage of eCPRI.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Two new sync modes were introduced into rte_ring:
relaxed tail sync (RTS) and head/tail sync (HTS).
This change provides user with ability to select these
modes for ring based mempool via mempool ops API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
refcnt_atomic member in structures rte_mbuf and rte_mbuf_ext_shared_info
will be removed in 20.11 release.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@redhat.com>
RTE_FLOW API allows hardware parsing and steering of packets to specific
queues which helps in distributing ingress traffic across various cores.
Adding 'flow' rules allows user to specify the distribution required.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The new 5-tuple swap engine swaps:
source and destination mac address,
source and destination address in ipv4/ipv6,
source and destination port in UDP/TCP.
The forwarding engine will parse each layer
and swap it, and will stop when the next
layer doesn't match.
The mentioned headers of ICMP/ARP/Multicast
packets will be swapped as well according to
matching layers.
usage: --forward-mode=5tswap
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is the requirement on some networks for precise traffic timing
management. The ability to send (and, generally speaking, receive)
the packets at the very precisely specified moment of time provides
the opportunity to support the connections with Time Division
Multiplexing using the contemporary general purpose NIC without involving
an auxiliary hardware. For example, the supporting of O-RAN Fronthaul
interface is one of the promising features for potentially usage of the
precise time management for the egress packets.
The main objective of this patchset is to specify the way how applications
can provide the moment of time at what the packet transmission must be
started and to describe in preliminary the supporting this feature
from mlx5 PMD side [1].
The new dynamic timestamp field is proposed, it provides some timing
information, the units and time references (initial phase) are not
explicitly defined but are maintained always the same for a given port.
Some devices allow to query rte_eth_read_clock() that will return
the current device timestamp. The dynamic timestamp flag tells whether
the field contains actual timestamp value. For the packets being sent
this value can be used by PMD to schedule packet sending.
The device clock is opaque entity, the units and frequency are
vendor specific and might depend on hardware capabilities and
configurations. If might (or not) be synchronized with real time
via PTP, might (or not) be synchronous with CPU clock (for example
if NIC and CPU share the same clock source there might be no
any drift between the NIC and CPU clocks), etc.
After PKT_RX_TIMESTAMP flag and fixed timestamp field supposed
deprecation and obsoleting, these dynamic flag and field might be
used to manage the timestamps on receiving datapath as well. Having
the dedicated flags for Rx/Tx timestamps allows applications not
to perform explicit flags reset on forwarding and not to promote
received timestamps to the transmitting datapath by default.
The static PKT_RX_TIMESTAMP is considered as candidate to become
the dynamic flag and this move should be discussed.
When PMD sees the "rte_dynfield_timestamp" set on the packet being sent
it tries to synchronize the time of packet appearing on the wire with
the specified packet timestamp. If the specified one is in the past it
should be ignored, if one is in the distant future it should be capped
with some reasonable value (in range of seconds). These specific cases
("too late" and "distant future") can be optionally reported via
device xstats to assist applications to detect the time-related
problems.
There is no any packet reordering according timestamps is supposed,
neither within packet burst, nor between packets, it is an entirely
application responsibility to generate packets and its timestamps
in desired order. The timestamps can be put only in the first packet
in the burst providing the entire burst scheduling.
PMD reports the ability to synchronize packet sending on timestamp
with new offload flag:
This is palliative and might be replaced with new eth_dev API
about reporting/managing the supported dynamic flags and its related
features. This API would break ABI compatibility and can't be introduced
at the moment, so is postponed to 20.11.
For testing purposes it is proposed to update testpmd "txonly"
forwarding mode routine. With this update testpmd application generates
the packets and sets the dynamic timestamps according to specified time
pattern if it sees the "rte_dynfield_timestamp" is registered.
The new testpmd command is proposed to configure sending pattern:
set tx_times <burst_gap>,<intra_gap>
<intra_gap> - the delay between the packets within the burst
specified in the device clock units. The number
of packets in the burst is defined by txburst parameter
<burst_gap> - the delay between the bursts in the device clock units
As the result the bursts of packet will be transmitted with specific
delays between the packets within the burst and specific delay between
the bursts. The rte_eth_read_clock is supposed to be engaged to get the
current device clock value and provide the reference for the timestamps.
[1] http://patches.dpdk.org/patch/73714/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The APIs are marked in the doxygen comment but better to mark the
symbols too. This is planned for v20.11 release.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Flow manager API includes push/pop actions, so support corresponding
DPDK flow actions.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Added support for set ipv4 address action items. It allows the source
or destination ip address to be changed for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan push and vlan pop actions
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add bnxt vector PMD support using NEON SIMD instructions.
Also update the 20.08 release notes with this information.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Dynamic flow used instead of layout defined.
The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask should start from the beginning of IOVA.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds support for portal migration by disabling stashing
for the portals which is used in the non-affined threads, or on
threads affined to multiple cores
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables flow query function to get the
configuration of the specified rule.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Two APIs are added:
rte_pmd_ixgbe_get_fdir_info.
rte_pmd_ixgbe_get_fdir_stats.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Three APIs are added:
rte_pmd_i40e_get_fdir_info.
rte_pmd_i40e_get_fdir_stats.
rte_pmd_i40e_set_gre_key_len.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
This patch enables cloud filter for IPv4/6_UDP/TCP/SCTP with
SRC port only or DST port only.
This supports different filter types for the same packet type.
E.g. one IPv4_UDP rules with SRC port only and another IPv4_UDP rule
with DST port only.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch add more support for switch parser of PPPoE packet,
it enable parse tcp/udp L4 layer and ipv4/ipv6 L3 layer parser for
PPPoE payload, so we can use L4 dst/src port and L3 ip address as
input set for switch filter PPPoE related rule.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch refactors qat data into structures
which are local to the process and structures which
are intended to be shared by primary and secondary
processes. This enables qat devices to be used by
multi process applications.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add support to the QAT SYM PMD for the DOCSIS protocol, through the
rte_security API. This, therefore, includes adding support for the
rte_security API to this PMD.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Add support to the AESNI-MB PMD for the DOCSIS protocol, through the
rte_security API. This, therefore, includes adding support for the
rte_security API to this PMD.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for DOCSIS protocol to rte_security library. This support
currently comprises the combination of Crypto and CRC operations.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_cio_*mb APIs will be deprecated in 20.11 release.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the barrier APIs for IO to reflect that Armv8-a is other-multi-copy
atomicity memory model.
Armv8-a memory model has been strengthened to require
other-multi-copy atomicity. This property requires memory accesses
from an observer to become visible to all other observers
simultaneously [3]. This means
a) A write arriving at an endpoint shared between multiple CPUs is
visible to all CPUs
b) A write that is visible to all CPUs is also visible to all other
observers in the shareability domain
This allows for using cheaper DMB instructions in the place of DSB
for devices that are visible to all CPUs (i.e. devices that DPDK
caters to).
Please refer to [1], [2] and [3] for more information.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=22ec71615d824f4f11d38d0e55a88d8956b7e45f
[2] https://www.youtube.com/watch?v=i6DayghhA8Q
[3] https://www.cl.cam.ac.uk/~pes20/armv8-mca/
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The Linux kernel module vfio-pci introduces the VF token to enable
SR-IOV support since 5.7.
The VF token can be set by a vfio-pci based PF driver and must be known
by the vfio-pci based VF driver in order to gain access to the device.
Since the vfio-pci module uses the VF token as internal data to provide
the collaboration between SR-IOV PF and VFs, so DPDK can use the same
VF token for all PF devices by specifying the related EAL option.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Current l2fwd application statically configures adjacent ports as
destination ports for forwarding the traffic.
Add a portmap option to pass the forwarding port pair mapping which allows
the user to configure forwarding port mapping.
If no portmap argument is specified, destination port map is not
changed and traffic gets forwarded with existing mapping.
To align port/queue configuration of each lcore with destination port
map, port/queue configuration of each lcore gets modified when portmap
option is specified.
Ex: ./l2fwd -c 0xff -- -p 0x3f -q 2 --portmap="(0,3)(1,4)(2,5)"
With above portmap option, traffic received from portid = 0 gets forwarded
to port = 3 and vice versa, similarly traffic gets forwarded on other port
pairs (1,4) and (2,5)
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As an arrangement to per queue operations in the vDPA device it is
needed to change the next experimental API:
The API ``rte_vhost_host_notifier_ctrl`` was changed to be per queue
instead of per device.
A `qid` parameter was added to the API arguments list.
Setting the parameter to the value RTE_VHOST_QUEUE_ALL configures the
host notifier to all the device queues as done before this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The new devarg will control the steering of the lacp traffic.
When setting dv_lacp_by_user = 0 the lacp traffic will be
steered to kernel and managed there.
When setting dv_lacp_by_user = 1 the lacp traffic will
not be steered and the user will need to manage it.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
New cn98xx SOC comes up with two NIX blocks wrt
cn96xx, cn93xx, to achieve higher performance.
Also the no of cores increased to 36 from 24.
Adding support for cn98xx where need a logic to
detect if the LF is attached to NIX0 or NIX1 and
then accordingly use the respective NIX block.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The guest virtio device may request MTU updating when the vhost backend
device exposes a capability to support it.
Expose the MTU feature capability.
At configuration time, check the requested MTU and update it in the HW
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for statistics operations.
A DevX counter object is allocated per virtq in order to
manage the virtq statistics.
The counter object is allocated before the virtq creation
and destroyed after it, so the statistics are valid only in
the life time of the virtq.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The vDPA device offloads all the datapath of the vhost
device to the HW device.
In order to expose to the user traffic information this
patch introduces new 3 APIs to get traffic statistics, the
device statistics name and to reset the statistics per
virtio queue.
The statistics are taken directly from the vDPA driver
managing the HW device and can be different for each vendor
driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
