Add support for rte_flow_item_raw to parse custom L2 and L3 protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Driver re-allocates memory for the command response buffer
when the installed firmware version is newer (and has a larger
max response length) than the version of HWRM that was used to
build the PMD.
This change helps to avoid the re-allocation by allocating the
memory for the command response buffer with PAGE_SIZE.
Coverity issue: 366256, 366204, 366180
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
When the mask field of an rte_flow pattern item is NULL,
the default mask for that item type should be used.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove early buffer posting logic from burst receive loop to address
several issues:
- Posting receive descriptors without first posting completion
entries risks overflowing the completion queue.
- Posting receive descriptors without updating rx_raw_prod
creates the possibility that the receive descriptor doorbell
can be written twice with the same value.
- Having this logic in the inner descriptor processing loop
can impact performance.
Fixes: 637e34befd9c ("net/bnxt: optimize Rx processing")
Fixes: 04067844a3e9 ("net/bnxt: reduce CQ queue size without aggregation ring")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed to return error when PTP support is not supported on the port.
Also, removed an unnecessary check inside bnxt_get_rx_ts().
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VFs does not have the privilege to change link configuration.
But the driver silently returns success to these ethdev callbacks
without actually issuing the HWRM command to bring the link up/down.
Fixes: 5c206086feaa ("net/bnxt: add link state operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The PMD is allocating an extra RSS context with each port start.
But it is freeing only one RSS context during port stop. So at some point
we run out of RSS contexts when we do multiple port stop/start sequences.
bnxt_hwrm_vnic_ctx_alloc() is called by bnxt_setup_one_vnic(), but
bnxt_hwrm_vnic_ctx_free() is not called in the corresponding
bnxt_free_one_vnic().
Fix this by calling bnxt_hwrm_vnic_ctx_free() in bnxt_free_one_vnic().
Fixes: 7fe5668d2ea3 ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
CID 363716 (#1 of 1): Unchecked return value (CHECKED_RETURN)
check_return: Calling rte_pci_write_config without checking
return value (as is done elsewhere 46 out of 49 times).
Coverity issue: 363716
Fixes: be14720def9c ("net/bnxt: support FW reset")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix to read the sequence ID register to get Tx timestamp.
Reading the sequence ID register is necessary for the HW FIFO to
advance and thereby get the correct value of the timestamp on Tx side.
This patch fixes that.
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
These items allow the user to avoid having to set the EtherType field in an
ETH item to match PPPoE traffic. Using a PPPoED (PPPoE discovery) or PPPoES
(PPPoE session) item will lead to EtherType filter being set up with
a corresponding value. If an ETH item provides its own EtherType value,
it will be checked for correctness.
Matching on PPPoE fields is not supported.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For NVGRE protocol, the default value of 'c_k_s_rsvd0_ver'
must be 0x2000, and protocol type must be 0x6558 in the NVGRE
header.
This patch updates these two configurations while parsing the nvgre
encap.
Fixes: dcd962fc6b4e ("app/testpmd: add NVGRE encap/decap")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add support for query Rx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Add support for query Tx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch added function level imissed stats for PF and VF. In
Kunpeng920, imissed is supported, only including RPU drop stats in PF.
In kunpeng930, imissed is supported,including RPU drop stats and SSU
drop stats in PF.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The current RAS code stores the reported RAS statistics in xstats.
This part of statistics is of little use in practice, and because
of the change of RAS scheme on Kunpeng930, the driver can not
obtain the RAS information any more, so this patch delete these
redundant RAS statistics.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Adjust the format of hns3 RAS related structures to resolve
the static check warnings.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Kunpeng930 support outer UDP cksum, this patch add support for it.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the driver support multiple IO burst function and auto
selection of the most appropriate function based on offload
configuration.
Most applications such as l2fwd/l3fwd don't provide the means to
change offload configuration, so it will use the auto selection's io
burst function.
This patch support runtime config to select io burst function, which
add two config: rx_func_hint and tx_func_hint, both could assign
vec/sve/simple/common.
The driver will use the following rules to select io burst func:
a. if hint equal vec and meet the vec Rx/Tx usage condition then use the
neon function.
b. if hint equal sve and meet the sve Rx/Tx usage condition then use the
sve function.
c. if hint equal simple and meet the simple Rx/Tx usage condition then
use the simple function.
d. if hint equal common then use the common function.
e. if hint not set then:
e.1. if meet the vec Rx/Tx usage condition then use the neon function.
e.2. if meet the simple Rx/Tx usage condition then use the simple
function.
e.3. else use the common function.
Note: the sve Rx/Tx usage condition based on the vec Rx/Tx usage
condition and runtime environment (which must support SVE).
In the previous versions, driver will preferred use the sve function
when meet the sve Rx/Tx usage condition, but in this case driver could
get better performance if use the neon function.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When link goes down, disable the port's Rx path to drop the incoming
traffic closer to the wire, instead of accepting them in for further
Rx processing, only to eventually drop them at the port's RxQs. This
prevents unnecessary congestion in the Rx path. The port's Rx path
will be re-enabled once the link up event is received in the firmware
event queue.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The first GA of the SN1022 does not support Geneve.
Fixes: d874d2a149ed ("common/sfc_efx/base: support UDP tunnel operations for EF100")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
If there is no VXLAN among pattern items, the action will be turned down.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The action has no arguments.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Provide necessary facilities for handling this action.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Current API signature makes it hard to add other entities that
belong to a flow specification. Pass the flow specification
so that additional members can be accessed through the spec.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
For convenience, there are two separate APIs provided, one for
adding the action and one for setting the encap. header ID.
This design allows the client driver to first build the action
set specification (which validates the order of the actions)
and, if everything is correct, proceed with allocation of the
resource utilised by the action set (encap. header). This
facilitates clarity of the client code and its efficiency.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Let the client allocate / free encap. headers.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
One ought to reuse existing header structs in flow items.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
These fields have network byte order. Highlight it using dedicated type.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One ought to reuse existing header structs in flow items.
This particular item contains non-header fields, so it's
important to keep the header fields in a separate struct.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One ought to reuse existing header structs in flow items.
This particular item contains non-header fields, so it's
important to keep the header fields in a separate struct.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In this commit we generalize the movement of user-specified
meta data between mbufs and FPGA AXIS tuser fields using
user-defined hook functions.
- Previous use of PMD dynfields are removed
- Remove emptied rte_pmd_ark.h
- Hook function added to ark_user_ext
- Add hook function calls in Rx and Tx paths
- Update guide with example of hook function use
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
- New PCIe IDs using net/ark driver
- Update Version IDs and structures specified by hardware
- New internal descriptor status for TX
- Adjust data placement in RX operations, headroom in retained for
segmented mbufs
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Allocate mbufs for Rx path in bulk of at least 64 buffers
to improve performance. Allow recovery even without
a Rx operation to support lack of buffers in pool.
Fixes: be410a861598 ("net/ark: add recovery for lack of mbufs")
Cc: stable@dpdk.org
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Fixes: b33ccdb17f55 ("net/ark: provide API for hardware modules MPU RQP and pktdir")
Cc: stable@dpdk.org
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
The experimental banner can be removed.
Every in-tree file is compiled with _GNU_SOURCE, so RTE_HAS_CPUSET is
unneeded for an internal header.
Fixes: 0e64ae618e10 ("telemetry: move init function to internal header")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
rte_eal_memory_detach() did not account for cases where multi-process
mode is disabled: --in-memory and --no-shconf. This resulted
in unmapping memory that had not been mapped, which caused errors:
EAL: Could not unmap memory: No error (Windows)
EAL: Cannot munmap(0x1d47f40, 0x7000): Invalid argument (Linux)
Confusing "No error" was caused by using errno instead of rte_errno
set by rte_mem_unmap().
Skip detaching memory altogether when --in-memory is specified.
Skip unmapping configuration when it's not shared.
Fix and add error handling to produce proper log messages.
Fixes: dfbc61a2f9a6 ("mem: detach memsegs on cleanup")
Reported-by: Jie Zhou <jizh@microsoft.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Rename the key opaque pointer from rte_tls_key to
rte_thread_key to avoid confusion with transport layer security.
Also rename and remove the "_tls" term from the following
functions to avoid redundancy:
rte_thread_tls_key_create
rte_thread_tls_key_delete
rte_thread_tls_value_set
rte_thread_tls_value_get
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Add error number reporting to rte_errno in all
functions in the rte_thread_tls_* API.
Suggested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
In case the number of requested hugepages cannot be set,
a more detailed error message is printed.
The new message does not mention "reserve" because setting
can be reserving or clearing.
The filename and numbers requested/set are printed to ease debugging.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The default page size can be None, and the page size from user request
can be 0 kB if lower than 1024. In these cases, a division will fail.
In order to avoid a Python exception, the page size is checked
and an error message "Invalid page size" is printed.
A similar error message is printed in set_hugepages()
if the size is not supported, except at this stage the message can be
completed with "Valid page sizes".
Unfortunately the first check is too early to print such information.
A third error message can be printed in a different place (get_memsize)
in case of a format issue, e.g. a negative size.
The function get_memsize() is also used for total requested size,
so the error message "not a valid page size" was potentially wrong.
This message is replaced with the more general "is not a valid size".
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When the dpdk-telemetry client connects to a DPDK instance, we can use the
PID provided in the initial connection message to query from /proc the name
of the process we are connected to, and display that to the user. We use
the "cmdline" procfs entry for the query since that is available on both
Linux and FreeBSD (assuming procfs is mounted on the BSD instance).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Currently the dpdk-telemetry.py script connects to all running DPDK apps
consecutively. With the addition of this file-prefix argument, we can limit
the amount of information returned providing improved consumability and
precision to the user.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The rte_telemetry_init() function is for EAL use only, so can be moved to
the internal header rather than being in the public one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
