This patch use input_set_o and input_set_i to distinguish inner/outer
input set. input_set_i is only used for inner field.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In Single VLAN Mode, single VLAN filters via ICE_SW_LKUP_VLAN are based
on the inner VLAN ID, so the VLAN TPID (i.e. 0x8100 or 0x888a8) doesn't
matter.
In Double VLAN Mode, outer/single VLAN filters via ICE_SW_LKUP_VLAN are
based on the outer/single VLAN ID + VLAN TPID.
For both modes, adding a VLAN 0 + no VLAN TPID filter to handle untagged
traffic when VLAN pruning is enabled. Also, this handles VLAN 0 priority
tagged traffic in Single VLAN Mode, since the VLAN TPID is not part of
filtering.
If Double VLAN Mode is enabled then an explicit VLAN 0 + VLAN TPID filter
needs to be added to allow VLAN 0 priority tagged traffic in DVM, since
the VLAN TPID is part of filtering.
Fixes: 14e7a4b37b4f ("net/ice/base: support configuring device in double VLAN mode")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Fixes: 1b009275e2c8 ("net/ice: add Rx queue init in DCF")
Fixes: ae2bdd0219cb ("net/ice: support MTU setting")
Fixes: 50370662b727 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use struct ice_rss_hash_cfg as parameter for
ice_add_rss_cfg, ice_add_rss_cfg_sync and
ice_rem_rss_cfg, ice_rem_rss_cfg_sync.
Introduce enmu ice_rss_cfg_hdr_type to allow user specify the more
flexible RSS configure.
ICE_RSS_OUTER_HEADERS - take outer layer as RSS inputset
ICE_RSS_INNER_HEADERS - take inner layer as RSS inputset
ICE_RSS_INNER_HEADERS_W_OUTER_IPV4
- take inner layer as RSS inputset for packet with outer IPV4
ICE_RSS_INNER_HEADERS_W_OUTER_IPV6
- take inner layer as RSS inputset for packet with outer IPV6
ICE_RSS_ANY_HEADERS - try with outer first then inner
(same as the behaviour without this change)
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Implement interface 'ice_rss_hash_conf_get' to support show RSS
hash configuration.
Note:
Only return rss_hf from latest dev_configure or dev_rss_hash_update.
All configures from rte_flow are ignored.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ice_acl_create_filter to create a rule and ice_acl_destroy_filter
to destroy a rule. If a flow is matched by ACL filter, filter rule
will be set to HW. Currently IPV4/IPV4_UDP/IPV4_TCP/IPV4_SCTP pattern
and drop action are supported.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Current implementation for PF RSS config wrap function has some
potential bugs about GTPU, e.g., same input set for GTPU inner and
non-TUN have different hash values, which should be same. Thus, we
use extra pre and post processing to re-config GTPU rules.
Fixes: 185fe122f489 ("net/ice: fix GTPU down/uplink and extension conflict")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, all data paths already support flow mark, so remove devargs
"flow-mark-support". FDIR matched ID will display in verbose
when packets match the created rule.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
The patch adds fdir_enabled flag to identify if parse flow director mark
ID from flexible Rx descriptor.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
This patch supports RxDID #22 by the following changes:
- add structure and macro definition for RxDID #22.
- support RxDID #22 format in normal path.
- change RSS hash parsing from RxDID #22 in AVX/SSE data path.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
For tunnel and non-tunnel packets, it can share the same seg_tun info.
seg_tun[1] can be used for supporting inner fields with tunnel flow rule
or for non-tunnel packets, seg_tun[0] only used for tunnel outer part.
Add outer_input_set to distinguish inner/outer input set. So we can
identify different fields in outer or inner part.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add RXDID #25 to support Auxiliary IP Offset Rx descriptor, including
FlexiMD.4: Outer/Single IPv4 Header offset
FlexiMD.5: Outer/Single IPv6 Header offset
And parse the valid IP Offset into mbuf by flexible descriptor
section via devargs "proto_xtr" with "proto_xtr=ip_offset".
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The Flexible Metadata #4 and #5 in the Rx Flex Descriptor are defined to
extract the protocol specified fields or its offset. Its function relays
on the DDP package support in hardware.
Optimize to only check the hardware support when the user specifies the
'proto_xtr' devargs. And not require all the types need to be support in
hardware, otherwise if new protocol extraction type is introduced, it is
hard to maintain the compatibility. Just check the type support in need.
And the protocol IDs are 8 bits length, so the uint8_t is the right type
to be used. Also introduce the 'opcode' variable to specify the metadata
extraction type: it can be protocol fields or offset report.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When adding a RSS rule with GTPU_DWN/UP, it will write from top to
bottom for profile due to firmware limitation. If a RSS rule with
GTPU_EH already exists, then GTPU_DWN/UP packet will match GTPU_EH
profile. This patch solves this issue by remembering a gtpu_eh RSS
configure and removing it before the corresponding RSS configure
for downlink/uplink rule is issued.
Fixes: 2e2810fc1868 ("net/ice: fix GTPU RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixed the issue that rx/tx bytes overflowed
on 40 bit limitation by enlarging the limitation.
Fixes: a37bde56314d ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Initialize and update RSS configure based on user request
(rte_eth_rss_conf) from dev_configure and .rss_hash_update ops.
All previous default configure has been removed.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For DCF, flow ops may be executed in different threads,
so an thread safe option for generic flow APIs is needed.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
A new DCF PMD will be introduced, which runs on Intel VF hardware, and
it is a pure software design to control the advance functionality (such
as switch, ACL) for rest of the VFs.
The DCF (Device Config Function) feature shares the core functions of
the ICE PMD, like it needs to export the DDP definition symbols for the
new DCF PMD use.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The patch distinguishes fdir rules for GTPU with or without
extend header, so flow to match below patterns can be created
correctly.
1. eth / ipv4 / udp / gtpu teid is 10 / ...
2. eth / ipv4 / udp / gtpu teid is 10 / gtp_psc / ...
3. eth / ipv4 / udp / gtpu / gtp_psc qfi is 10 / ...
4. eth / ipv4 / udp / gtpu teid is 10 / gtp_psc is 10 / ...
Fixes: efc16c621415 ("net/ice: support flow director GTPU tunnel")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Since not all data paths support flow mark, the driver needs
a hint from application to select the correct data path if
flow mark is required. The patch introduces a devarg
"flow-mark-support" as a workaround solution, since a standard
way is still ongoing.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
By moving irq enable/disable from device start/stop to FDIR
setup/teardown, FDIR queue irq config is independent of LAN queue irq
config. So device stop will not cause FDIR rule failure.
Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Qi Zhang <qi.z.zhang@intel.com>
To avoid memzone reserve failure and memory leak, following
resources management should be added.
- Check if the FDIR Memzone already exists before reserving.
- Free FDIR memzone when teardown and other failure scenarios.
Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch fixes a kernel driver link status issue by recovering
link status when device stops.
Fixes: e6161345d8a9 ("net/ice: support link status change")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The original design is to use rte_mbuf::udata64 to save the metadata of
protocol extraction which has network protocol data fields and type, a
private API is used to decode this metadata.
Use the dynamic mbuf field and flags to register the needed fields in
mbuf, to avoid overwriting 'rte_mbuf::udata64', since the application
may use it. Now the protocol extraction metadate is saved into dynamic
mbuf field with 4B size, and its type and validity is indicated by the
related dynamic mbuf flags in 'rte_mbuf::ol_flags'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch add FDIR statistical counter support
and it includes RTE_FLOW count actions support
and query support.
RTE_FLOW count actions support id and shared.
RTE_FLOW query record packet hits by default.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The patch integrates the counter resource init/release into fdir's
init/release scenario
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add ice_create_fdir_filter to create a rule. If a flow is matched by
flow director filter, filter rule will be set to HW. For now common
pattern and queue/passthru/drop/mark actions are supported.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch adds a HW FDIR rule to the FDIR HW table
without adding a FDIR filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Enable flow director engine, including initialization and teardown.
- Control VSI create and release.
- Queue pair allocated, set up and release.
- Programming packet create and release.
- FDIR profile create and release.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The patch reworks the generic flow API (rte_flow) implementation.
It introduces an abstract layer which provides a unified interface
for low-level filter engine (switch, fdir, hash) to register supported
patterns and actions and implement flow validate/create/destroy/flush/
query activities.
The patch also removes the existing switch filter implementation to
avoid compile error. Switch filter implementation for the new framework
will be added in the following patch.
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added a devarg to control the mode in generic flow API.
We use none-pipeline mode by default.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
If the default dev args 'proto_xtr' is not in the first position, it
will overwrite the parsed queue map value, so use an new variable to
save the default.
And enhance the error message printing to show the right information.
Fixes: 7e124ff12c85 ("net/ice: support protocol extraction per Rx queue")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds the feature that supports loading DDP package
according to the device serial number. Prior to loading the
default DDP package (ice.pkg), the driver will check for the
presence of a device-specific DDP package with the name containing
64-bit PCIe Device Serial Number (ice-xxxxxxxxxxxxxxxx.pkg)
during initialization. Users can use "lspci -vs" to get the device
serial number.
The pkg search path are /lib/firmware/updates/intel/ice/ddp/
and /lib/firmware/intel/ice/ddp/. If the package exists,
the driver will download it to the device instead of the default
one. The loaded package type (OS default and COMMS) will be
stored in ice_adapter->active_pkg_type. The package version is
stored in ice_hw->active_pkg_ver.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add multiple processes support for ice, secondary processes will share
memory and configuration with primary process, do not need further
initialization for secondary processes.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When OS package is not provided driver silently goes into safe mode,
since safe mode is missing most of advanced features, this may confuse
the users.
Instead of going into safe mode silently, add devarg for safe mode
enabling only for users that are asking for it.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
This patch adds ice_flow_create, ice_flow_destroy,
ice_flow_flush and ice_flow_validate support,
these are used to handle all the generic filters.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The patch enables the backend of rte_flow. It transfers
rte_flow_xxx to device specific data structure and
configures packet process engine's binary classifier
(switch) properly.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Max frame size setup should consider double VLAN case.
Fixes: ae2bdd0219cb ("net/ice: support MTU setting")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Device speed capability should be specified based on different PHY types
instead of a fixed value, this patch fix the issue.
Fixes: 690175ee51bf ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If E810 download package failed, driver need to go to safe mode.
In the safe mode, some advanced features will not be supported.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
