Add variable wd_state to make driver functional without keep alive
AENQ handler.
The watchdog will be executed only if the aenq group has keep alive
enabled.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The admin queue can stop responding or became inactive due to unexpected
behaviour of the device. In that case, the whole device should be
restarted.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Keep alive is executing AENQ interrupt periodically. It allows to check
health of the device and trigger reset event if the device will stop
responding.
To check for the state of the device, the DPDK application must call
rte_timer_manage().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reset routine can be used by the DPDK application to reset the device in
case of receiving RTE_ETH_EVENT_INTR_RESET from the PMD.
The reset event is not triggered by the driver, yet. It will be added in
next commits to enable error recovery in case of misfunctioning of the
device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
There is no need to check for restart all queues. It is sufficient to
check only previously initialized queues.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
When ENA notifications are provided ena_notification handler is called.
It checks if received value is not corrupted and if necessary it
reports proper warnings.
Data received from NIC is parsed in ena_update_hints. Fields for
storing those information was added to ena_adapter structure.
ENA notification are enabled by setting ENA_ADMIN_NOTIFICATION flag in
aenq_groups.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
To make the LSC interrupt working, the AENQ must be configured properly
in the ENA device. The AENQ interrupt is common for all maintenance
interrupts - the proper handler is then executed depending on the
received descriptor.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Lack of uninit routine could lead to memory leak.
Stop was added to fulfill allowed PMD operations.
Checks for the PMD states in the start and configure routine were
removed, as the upper layer is already checking for them.
The interrupt setup was moved from start to init function.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The ENA device is able to send MSI-X when it will complete an command
when polling mode is deactivated. Further, the same interrupt handler
will be used for the AENQ handling - services of the ENA device, that
allows to implement watchdog or LSC handler.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The legacy LLQ should no longer be supported by the drivers, as this API
is deprecated. Because of that, it was removed from the driver.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
ena_com is the HAL provided by the vendor and it shouldn't be modified
by the driver developers.
The PMD and platform file was adjusted for the new version of the
ena_com:
* Do not use deprecated meta descriptor fields
* Add empty AENQ handler structure with unimplemented handlers
* Add memzone allocations count to ena_ethdev.c file - it was
removed from ena_com.c file
* Add new macros used in new ena_com files
* Use error code ENA_COM_UNSUPPORTED instead of ENA_COM_PERMISSION
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Rafal Kozik <rk@semihalf.com>
The upcoming patches for the ENA PMD are part of 1.1.0 update of the PMD
and the version number is updated accordingly.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The xstats API expects that the driver fills both values and ids for
each filled entries.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As per existing behavior, when firmware sends a link change
notification, PMD only updates the link structure but does
not notify applications about it.
This results in application sending packets even when link
status is down.
Fix this issue by issuing RTE_ETH_EVENT_INTR_LSC.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
qede_link_update() always returns -1 i.e. link not changed,
because it compares the variables which always hold same value.
Fix this function by using rte_eth_linkstatus_set().
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Multiple port reconfigurations can lead to memory allocation failures
due to hitting RTE memzone limit or no more room in config while
reserving memzone.
When freeing memzones, update the memzone mapping and the memzone count.
Release Rx and Tx queue rings allocated during queue setup.
Fixes: a39001d90d ("net/qede: fix DMA memory leak")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Kevin Traynor <ktraynor@redhat.com>
Fix fast path array index which is used for passing L2 handles to RSS
indirection table, properly distribute rxq handles for indirection table.
Currently, it is using the local copy of indirection table. When the RX
queue configuration changes the local copy becomes invalid.
Fixes: 69d7ba88f1 ("net/qede/base: use L2-handles for RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Kevin Traynor <ktraynor@redhat.com>
Avoid NULL dereference by checking pointer before using it.
Note that the fixes tag is before the driver was renamed
to mvpp2, so the patch will not apply that far back.
Fixes: 3588aaa68e ("net/mrvl: fix HIF objects allocation")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Do not error out on invalid devarg, log the message and continue.
Decide updating the tx-switching config in check args. Add a check for
VF when disabling tx-switching
Fixes: 612ce81b20 ("net/qede: add devargs to disable NPAR Tx switching")
Fixes: f64b91b0eb ("net/qede: replace config option with run-time arg")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes VF MTU update to work without having to restart the
vport and there by not requiring port re-configuration. It adds a
VF MTU Update TLV to achieve the same. Firmware can handle VF MTU update
by just pausing the vport.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Updating the logic to reflect unsigned integer as index for TAP PMD.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
For HMAC algorithms (SHAx-HMAC), the supported digest sizes are not a
fixed value, but a range between 1 and the maximum digest size for those
algorithms.
Fixes: 0f89def761 ("crypto/armv8: fix HMAC supported key sizes")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The callback should be invoked only for memory that has been registered
in a device, hence, no need to track cleanup events if no device is
present.
Bugzilla ID: 56
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx descriptor status callback was lost and request of the Rx
descriptor status crashes application if equal stride super-buffer
Rx mode is used.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch fixes link status update problem in interrupt mode.
Previously, directly reading link status register instead of
accessing via admin queue command may cause the link status
change interrupt callback inactive. This patch fixes the
problem by making the driver only read the register in
"no wait" and polling mode.
Bugzilla ID: 54
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Although uncommon, applications may destroy a device immediately after
probing it without going through dev_configure() first.
This patch addresses a crash which occurs when mlx4_dev_close() calls
mlx4_mr_release() due to an uninitialized entry in the private structure.
In addition MR cache init takes place on the device configuration.
When the device is re-configured multiple times, for example when
changing the number of queue on the flight, deadlock can happen.
This patch moved MR cache init from device configuration function to
probe function to make sure init only once.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
MR cache init takes place on the device configuration.
When the device is re-configured multiple times, for example when
changing the number of queue on the flight, deadlock can happen.
This patch moved MR cache init from device configuration function to
probe function to make sure init only once.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Although uncommon, applications may destroy a device immediately after
probing it without going through dev_configure() first.
This patch addresses a crash which occurs when mlx5_dev_close() calls
mlx5_mr_release() due to an uninitialized entry in the private structure.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The function dpdmai_set_tx_queue() is not implemented,
so it is removed from the export map file.
Fixes: 23e8fcb018 ("bus/fslmc: support MC DPDMAI object")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Internal buffers names have been shortened to meet ring names size
requirements after device name changed.
Fixes: 7ce00bf31b ("bbdev: change names of baseband devices")
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The TAP keep-alive queue was created in order to keep the TAP device
in Linux even in case all of its Rx/Tx queues are released (in Linux
terminology: even in case all of the TAP device file descriptors are
closed), however, the keep-alive queue itself is attached to the TAP
device like all other Rx/Tx queues and therefore the kernel will
enqueue to it some Rx packets based on the kernel RSS distribution
rules. Those packets are unknown to the application and will remain
lost in the keep-alive queue.
All queues are attached by default to the TAP device after they are
created though TUNSETIFF ioctl call.
The fix is to detach the keep-alive queue after its creation through
TUNSETQUEUE ioctl call.
Fixes: 3101191c63 ("net/tap: fix device removal when no queue exist")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
In 100G mode, we poll firmware slow path completion for every 1 second,
which is not enough and may result in completion timeout if
driver misses that window.
Patch "eal: set affinity for control threads" exposed this issue since
alarm callback runs in control thread context.
Fix this issue by update polling period to 100ms.
Fixes: d651ee4919 ("eal: set affinity for control threads")
Fixes: 2af14ca79c ("net/qede: support 100G")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
On some distros, the inbox rdma-core tree can contain the Software
Parser enum while the remaining structs still missing.
Fixes: 5f8ba81c42 ("net/mlx5: support generic tunnel offloading")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This is to fix the offloads introduced by commits
5f8ba81 net/mlx5: support generic tunnel offloading
5355f44 ethdev: introduce generic IP/UDP tunnel checksum and TSO
Fixes: 8589e944d0 ("net/mlx5: fix setting offsets for SW parser")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
DPDK apps can be executed as non-root users but current NFP lock
file for avoiding concurrent accesses to CPP interface is precluding
this option or requires to modify system file permissions.
When the NFP device is bound to VFIO, this driver does not allow this
concurrent access, so the lock file is not required at all.
OVS-DPDK as executed in RedHat distributions is the main NFP user
needing this fix.
Fixes: c7e9729da6 ("net/nfp: support CPP")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
For virtio-user server mode, one use case comes across segmentation fault.
step 1: Launch vhost side as client firstly.
step 2: launch virtio-user side as server.
The cause is: after registering virtio_interrupt_handler into
eal-intr-thread, two threads (main thread and eal-intr-thread) have
sync issues, so add rxvq pointer checking in function virtio_notify_peers
to decide if the code can continue.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This was missed in a previous patch for using new offload API.
It turns out the line can be removed because that internal PMD
crc_len data is not being used.
Fixes: a922c6a789 ("net/nfp: support new HW offloads API")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Some files were left with full license and wrong copyright format.
They are switched to this format:
SPDX-License-Identifier: BSD-3-Clause
Copyright 2017 Mellanox Technologies, Ltd
Fixes: 5feecc57d9 ("align SPDX Mellanox copyrights")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Enables TUN PMD sharing by attaching the port from the shared data.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The TX function is shared between TAP and TUN PMD. Checking TUN-TAP
type field will ensure the TAP PMD will always have protocol field
as 0.
Fixes: 204d026a39 ("net/tap: support tun")
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clear link state information during device start for fetching new state
before function completion.
Fixes: 605164c8e7 ("net/liquidio: add API to validate VF MTU")
Cc: stable@dpdk.org
Signed-off-by: Chuhong Yao <ych@panath.cn>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
