The ulp template database is updated to support the new
combined opcodes.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The fields in the device params structure are renamed to reflect
the usage of those fields.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp mapper changes to support mark actions for non
GFID entries that support only LFID rules.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vfr flag to the mark manager.
The vf representor flag is added to class table so it can be set in
the template details.
Also added the vfr flag process in mark database.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support of internal exact match flows and the action
mark is supported for these flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Unify the opcodes of the different enums into a single enum for reuse of
common processors. Also the ADD_PAD opcode is now SET_TO_ZERO.
This change better reflects the intent of the opcode and allows it to be
used in more circumstances without overloading the term pad.
The fields that were setting a constant zero have now been switched to
use the new SET_TO_ZERO opcode as an optimization. The SET_TO_ZERO does
not copy data into the key/result/mask fields, but rather simply
increments the write pointer.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp template db file is broken into three parts namely the
table, class and action files.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The implicit update of the egress vnic action bitset for a flow
that does not specify the forwarding port explicitly is removed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
ipv6 vtc_flow contains three fields
1. Version
2. Priority / Traffic Class
3. Flow Label
Currently, these are not parsed separately and also not set separately
in the field bitmap by the flow parser. However, the template treats
them separately. As a result, the flow matching doesn't succeed because
the bitmaps of parser and the template doesn't match.
This patch fixes this problem by parsing the above mentioned fields
individually to align with the template.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added flow db api to get the vf representor action
record for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Two templates are added to ulp template db, an ingress rule
for vxlan decap and an egress rule for vxlan encap.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
User could set max flow count by passing a devarg
"-w 0000:0d:00.0,max_num_kflows=64" to a DPDK application;
The value must be not less than 32K and be power-of-2;
the default value is 32K.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- rename regfile_wr_idx to regfile_idx
The regfile index shall be used for both write and read operations.
Hence the field is renamed.
- remove the unused enum BNXT_ULP_REGFILE_INDEX_CACHE_ENTRY_PTR
- rename the enums in the bnxt_ulp_resource_sub_type
The enums in the bnxt_ulp_resource_sub_type are renamed to reflect
the table types explicitly.
- rename an enum in the regfile index
The BNXT_ULP_REGFILE_INDEX_ACTION_PTR_MAIN is renamed to
BNXT_ULP_REGFILE_INDEX_MAIN_ACTION_PTR since it is the main
action pointer.
- remove cache_tbl_id enums
The bnxt_ulp_cache_tbl_id enums are not required any longer
since the index is now calculated using resource sub type
and direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The critical resource field in the template table is assigned
enumeration values instead of hard coded values.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The phy port action handler should get vport details and not
vnic id. The fix is to calculate the vport of the given
port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Extend index table processing to process action templates.
The index table processing is extended to address encapsulation fields
so that action template index table can be processed by a common index
processing function that can process both class and action index
tables.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This enables using the action bitmap to update the action result
fields in the flow creation instead of using computed header fields.
Direction bit needs to be added to the action bitmap during
flow parsing, so that egress flows can be matched to the
template signature.
An example would be the usage of the vlan pop action bitmap that is
used to updated action result field as part of this commit.
Also the ulp action bitmap enumeration values that
contain open flow string are renamed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The cache table id is not needed anymore since the value can
be calculated from resource sub type and direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for resource sub type to class and action tables
renamed table id to resource type.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The default identifier list in ulp mapper is extended to support
other truflow resource types and not just identifiers.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The compute field is extended to support action fields and not
just header fields, hence CHF is changed to CF. The access macro
for compute field is renamed to address this.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for computed header fields in the result field
processing. The computed header fields are fields that are extracted
from header fields or derived from data that is not part of the flow
command but shall be used in setting up of the flow rule.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support to include more resource functions in the flow
database. The number of bits increased from 3 to 8 for storing
the resource function.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove unnecessary fields from bitmap and mapper table.
- remove svif and VLAN info from header bitmap
The svif and vlan information are removed from header bitmap
signature so that the matching algorithm does not use these
fields to perform matching. So flows with or without vlan
tag could use the same flow template.
- remove mem field from mapper class table
Remove the unused mem field in the ulp mapper class table structure
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Created sub Makefile for tf_ulp and and tf_core for easy management.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue has been observed where packets are getting dropped
at DMAC filtering if a new dmac address is added before
starting of port.
Fixes: c43adf6168 ("net/octeontx2: add unicast MAC filter")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch split the vDPA header file in two, making
rte_vdpa_device structure opaque to the application.
Applications should only include rte_vdpa.h, while drivers
should include both rte_vdpa.h and rte_vdpa_dev.h.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This removes the notion of device ID in Vhost library
as a preliminary step to get rid of the vDPA device ID.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patch is a preliminary step to get rid of the
vDPA device ID. It makes vDPA callbacks to use the
vDPA device struct as a reference instead of the ID.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patch makes the vDPA framework to no more
support only PCI devices, but any devices by relying
on the generic device name as identifier.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
Expand vector PMD support to aarch32.
Enable i40e PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The include of 'arm_neon.h' causes issues to old gcc and aarch32.
Including 'rte_vect.h' instead fixes these issues.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable ixgbe PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code inspection, for a non-EAL thread identified with
rte_lcore_id() == LCORE_ID_ANY, the code currently arbitrarily uses
lcore 0 while there is no guarantee this lcore is used.
Fixes: 3588aaa68e ("net/mrvl: fix HIF objects allocation")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Liron Himi <lironh@marvell.com>
After enabling promiscuous mode all packets whose destination MAC
address is a multicast address were being dropped. This fix configures
H/W to receive all traffic in promiscuous mode. Promiscuous mode also
overrides allmulticast mode on/off status.
Fixes: 40e9f6fc15 ("net/qede: enable VF-VF traffic with unmatched dest address")
Cc: stable@dpdk.org
Signed-off-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
New cn98xx SOC comes up with two NIX blocks wrt
cn96xx, cn93xx, to achieve higher performance.
Also the no of cores increased to 36 from 24.
Adding support for cn98xx where need a logic to
detect if the LF is attached to NIX0 or NIX1 and
then accordingly use the respective NIX block.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The new kernel adds the names like "pf0" for Host PCI physical
function representor on Bluefield SmartNIC hosts. This patch
provides correct HPF representor recognition over the kernel
versions 5.7 and laters.
The following port naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is
assumed, the value is the index of attached VF
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index, for example "pf0", Host PF
representor is assumed on SmartNIC systems.
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of Host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Fixes: 79aa430721 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Initialize and update RSS configure based on user request
(rte_eth_rss_conf) from dev_configure and .rss_hash_update ops.
All previous default configure has been removed.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The creation of DBR can be used by a number of different
Mellanox PMDs. for example RegEx / Net / VDPA.
This commits moves the DBR creation and release functions to common
folder.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' are implemented under net directory. To enable
additional devices (e.g. regex, vdpa) to access these getter functions
they are moved under common directory.
As part of this commit string sizes DEV_SYSFS_NAME_MAX and
DEV_SYSFS_PATH_MAX are increased by 1 to make sure that the destination
string size in strncpy() function is bigger than the source string size.
This update will avoid GCC version 8 error -Werror=stringop-truncation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, when allocate a new counter, it needs loop the whole
container pool list to get a free counter.
In the case with millions of counters allocated, and all the pools
are empty, allocate the new counter will still need to loop the
whole container pool list first, then allocate a new pool to get a
free counter. It wastes the cycles during the pool list traversal.
Add a global free counter list in the container helps to get the free
counters more efficiently.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For single counter, when allocate a new counter, it needs to find the pool
it belongs in order to do the query together.
Once there are millions of counters allocated, the pool array in the
counter container will become very large. In this case, the pool search
from the pool array will become extremely slow.
Save the minimum and maximum counter ID to have a quick check of current
counter ID range. And start searching the pool from the last pool in the
container will mostly get the needed pool since counter ID increases
sequentially.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, to check if any shared counter with same ID existing, it will
have to loop the counter pools to search for the counter. Even add the
counter to the list will also not so helpful while there are thousands
of shared counters in the list.
Change Three-Level table to look up the counter index saved in the
relevant table entry will be more efficient.
This patch introduces the Three-level table to save the ID relevant
counter index in the table. Then the next while the same ID comes, just
check the table entry of this ID will get the counter index directly.
No search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For the case which data is linked with sequence increased index, the
array table will be more efficient than hash table once need to search
one data entry in large numbers of entries. Since the traditional hash
tables has fixed table size, when huge numbers of data saved to the hash
table, it also comes lots of hash conflict.
But simple array table also has fixed size, allocates all the needed
memory at once will waste lots of memory. For the case don't know the
exactly number of entries will be impossible to allocate the array.
Then the multiple level table helps to balance the two disadvantages.
Allocate a global high level table with sub table entries at first,
the global table contains the sub table entries, and the sub table will
be allocated only once the corresponding index entry need to be saved.
e.g. for up to 32-bits index, three level table with 10-10-12 splitting,
with sequence increased index, the memory grows with every 4K entries.
The currently implementation introduces 10-10-12 32-bits splitting
Three-Level table to help the cases which have millions of entries to
save. The index entries can be addressed directly by the index, no
search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The guest virtio device may request MTU updating when the vhost backend
device exposes a capability to support it.
Expose the MTU feature capability.
At configuration time, check the requested MTU and update it in the HW
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some configuration of the mlx5 port are done by the kernel net device
associated to the IB device represents the PCI device.
The DPDK mlx5 driver uses Linux system calls, for example ioctl, in
order to configure per port configurations requested by the DPDK user.
One of the basic knowledges required to access the correct kernel net
device is its name.
Move function to get interface name from IB device path to the common
library.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
