The change includes several parts:
1. Get maximum number of VMDQ pools supported in dev_init.
2. Fill VMDQ info in i40e_dev_info_get.
3. Setup VMDQ pools in i40e_dev_configure.
4. i40e_vsi_setup change to support creation of VMDQ VSI.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
'PFINT_ICR0_ENA' shouldn't be cleared in user space ISR,
otherwise adminq interrupts might be missed during
co-working with VF initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
As driver flag of 'RTE_PCI_DRV_INTR_LSC' was introduced
recently, it must be added in i40e. One second waiting
is needed for link up event, to wait the hardware into a
stable state, so the interrupt could be processed in two
parts. In addition, it should finally call the callback
function registered by application.
Test: http://dpdk.org/ml/archives/dev/2014-September/006091.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To get the code cleaner and more straightforward, a macro
is defined for all interrupt cause enable flags. Two more
causes are enabled, and all the interrupt causes for
reporting any errors are compiled conditionally, as they
are for debug only.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
To be more straightforward, two local variables in interrupt
handler are renamed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
Reviewed-by: Jijiang Liu <jijiang.liu@intel.com>
This patch fixes two issues:
- one is to fix the log issues
- the other is to set filter type when updating the default MAC filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
It mainly add i40e_vf_mac_filter_set() function to support perfect match
and hash match of MAC address and VLAN ID for VF.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
This patch mainly optimizes the i40e_add_macvlan_filters() and
the i40e_remove_macvlan_filters() functions in order that
we are able to provide filter type configuration.
And another relevant MAC filter codes are changed based on new data structures.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
As i40e_register_x710_int.h is defined for early hardware
only, it should be deleted.
For the register which is still required, just define it in
code directly as workaround.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Inside NIC RX interrupt is needed for single RX descriptor
write back. The fix is to correct the wrong configuration
of register 'I40E_QINT_RQCTL'.
Note that interrupt will be inside NIC only, that means it
will never be reported outside NIC hardware.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The filter types supported are listed below for VXLAN:
1. Inner MAC and Inner VLAN ID.
2. Inner MAC address, inner VLAN ID and tenant ID.
3. Inner MAC and tenant ID.
4. Inner MAC address.
5. Outer MAC address, tenant ID and inner MAC address.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Implement the configuration API of VXLAN destination UDP port,
and add new Rx offload flags for supporting VXLAN packet offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Only provide empty handler.
It can be completed to support filter features on fortville.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused empty functions]
To reuse code, 'i40e_config_hena()' and 'i40e_parse_hena()' and
their relevant macros need to be extern, and then can be used for
both PF and VF parts.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Overloading the 'msg_size' field in the 'arq_event_info' struct
is a bad idea. It leads to bugs when the structure is used in a
loop, since the input value (buffer size) is overwritten by the
output value (actual message length). The fix introduces one
more field of 'buf_len' for the buffer size, and renames the
field of 'msg_size' to 'msg_len' for the real message size.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Rename start_?x_per_q to ?x_deferred_start
and add comments.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
- remove leading \n in some messages,
- remove trailing \n in some messages,
- split multi lines messages.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Prepare for next commit, indent sections where log messages will be modified so
that next patch is only about \n.
Signed-off-by: David Marchand <david.marchand@6wind.com>
- Don't use DEBUGFUNC macro in pmd.
- Don't use printf for logs.
- We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs.
- Replace some PMD_INIT_LOG(DEBUG, "some_func") with PMD_INIT_FUNC_TRACE().
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
IPv6 will run NDP with multicast packets, but multicast packets will be
filtered by i40e driver by default. So we need to enable multicast when
promiscuous mode is on, or IPv6 will fail.
Signed-off-by: Ding Heng <hengx.ding@intel.com>
Reviewed-by: Helin Zhang <helin.zhang@intel.com>
i40e was failing to run in XEN domain0, as the physical
memory for adminq DMA should be allocated and translated
in a different way for XEN domain0. So
rte_memzone_reserve_bounded() should be used for DMA
memory allocation, and rte_mem_phy2mch() should be used
for DMA memory address translation to support running
i40e PMD in XEN domain0.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Hardware specification changed recently which requires to set
or clear TX queue disable flags before actually enabling or
disabling a specific TX queue. 'QTX_HEAD' register needs to
be cleared before setting the QENA_REQ flag.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
i40e_clear_hw() was provided recently in shared code (base driver)
to clear hardware, which can cover disabling all queues.
The code changes are to remove i40e_pf_disable_all_queues() and use
i40e_clear_hw() instead.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Mark the rte_log, cmdline_printf and rte_snprintf functions as
being printf-style functions. This causes compilation errors
due to mis-matched parameter types, so the parameter types are
fixed where appropriate.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Intel PMDs are built on top of the base drivers which are provided by Intel
and shouldn't be modified to allow easy batch upgrade from Intel.
The base driver is a "shared code" between many projects. But in DPDK,
the "base driver" naming makes more sense.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For NVM4.2.2 or after, the firmware has the correct configurations
and load the macvlan filter as expected. It is not needed to
Update the default macvlan filter which cannot be removed at
all during initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Double vlan should be specifically disabled by default during
port initialization which is expected.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The bit shifting were written wrongly in '0x1 < j',
the correct one should be '0x1 << j'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Change original 2 functions to common ones that can take effect on
both VF and PF VSIs.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In old firmware versions, the default mac vlan filter setting is
not the one that we expected, so we'll try to remove it and add
new one to change default setting. After firmware updated, it
change default setting to the one that we expected and don't
allow to remove the setting. In this case, we should add the
perenant mac address into mac list and then return.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
