mlx5 PMDs use the mlx5_dev_to_pci_addr() routine to convert
Infiniband device name to the Bus-Device-Function location
on the PCI bus. The routine returned success even in case of
not found identification string. On caller side it likely
caused the wrong match with the BDF of previous device
resulting in wrong representor and master recognitions.
Fixes: 771fa900b73a ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
There was a segment fault when dump flows with device argument of
dv_flow_en=0. In such case, Verbs flow engine was enabled and fdb
resources were not initialized. It's suggested to use mlx_fs_dump
for Verbs flow dump.
This patch adds verbs engine check, prints warning message and return
gracefully.
Fixes: f6d7202402c9 ("net/mlx5: support flow dump API")
Cc: stable@dpdk.org
Reported-by: Jørgen Østergaard Sloth <jorgen.sloth@xci.dk>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add support for DEV_TX_OFFLOAD_MBUF_FAST_FREE to bnxt
vector mode transmit. This offload may be enabled
only when multi-segment transmit is not needed, all
transmitted mbufs for a given queue will be allocated
from the same pool, and all transmitted mbufs will
have a reference count of 1.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. When port is stopped, we can forcibly set the link status for the
device to down.
2. VFs and MH PFs do not have the privilege to bring the link down.
As a result driver prints "Link Up" when port is stopped.
3. When driver receives link status/speed/config async event from fw,
driver invokes bnxt_link_update() with exp_link_status as ETH_LINK_UP
This is not logically correct as the async event could be for Link up
or link down or for speed change.
Fixes: 074cacb9907a ("net/bnxt: fix link during port toggle")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Once the separation between Verbs and DevX is done using function
pointers, the type field of the Rx queue object structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Separate Rx state modification to the Verbs and DevX modules.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Once the separation between Verbs and DevX is done using function
pointers, the type field of the Tx queue object structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use new modify_qp functions for Tx object creation in DevX and Verbs
modules.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Separate Tx object modification to the Verbs and DevX modules.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
1. Rename function to mention the internal resources.
2. Reduce the number of function arguments.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
1. Rename functions to mention the internal resources.
2. Reduce the number of function arguments.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Move Tx object similar resources allocations and debug logs from DevX
and Verbs modules to a shared location.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
As an arrangement to Windows OS support, the Verbs operations should be
separated to another file.
By this way, the build can easily cut the unsupported Verbs APIs from
the compilation process.
Define operation structure and DevX module in addition to the existing
Linux Verbs module.
Separate Tx object creation into the Verbs/DevX modules and update the
operation structure according to the OS support and the user
configuration.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The eqn field has become a field of sh directly since it is also
relevant for Tx and Rx.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Move the creation of the completion queue from the mlx5_txq_obj_new
function into an auxiliary function.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Move the creation of the send queue and the completion queue resources
from the mlx5_txq_obj_devx_new function into auxiliary functions.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The Tx queue structures manage 2 different reference counter per queue:
txq_ctrl reference counter and txq_obj reference counter.
There is no real need to use two different counters, it just complicates
the release functions.
Remove the txq_obj counter and use only the txq_ctrl counter.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a CQ is not created by DevX, it be allocated by either DV function
or by regular Verbs function.
The CQ DV attributes variable was wrongly defined and initialized in Tx
queue creation while the CQ is created by the regular Verbs function
what remained the attributes variable unused.
Remove the unused variable.
Fixes: faf2667fe8d5 ("net/mlx5: separate DPDK from verbs Tx queue objects")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
As part of SQ creation for Tx queue objects, a HW doorbell memory should
be allocated and mapped to the HW.
The SQ doorbell handler was wrongly saved on the CQ fields what caused
wrong doorbell release in the Tx queue object destroy flow.
Save the SQ doorbell handler in the SQ fields.
Fixes: 3a87b964edd3 ("net/mlx5: create Tx queues with DevX")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, base and nb_queue in the tc_rxq and tc_txq information
of queue and TC mapping on both TX and RX paths are uint8_t.
However, these data will be truncated when queue number under a TC
is greater than 256. So it is necessary for base and nb_queue to
change from uint8_t to uint16_t.
Fixes: 89d6728c7837 ("ethdev: get DCB information")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch [1] added support for RSS flow expansion.
It was added in ethdev for public use, but until now it is used only
by MLX5 PMD.
To allow local changes in this code, this patch removes it from ethdev
and moves it to MLX5 PMD file.
[1] commit 4ed05fcd441b ("ethdev: add flow API to expand RSS flows")
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Function rte_flow_expand_rss() is used to expand a flow rule with
partial pattern into several rules, to ensure all relevant packets
are matched.
It uses utility function rte_flow_expand_rss_item_complete(), to check
if the last valid item in the flow rule pattern needs to be completed.
For example the pattern "eth / ipv4 proto is 17 / end" will be completed
with a "udp" item.
This function returns "void" item in two cases:
1) The last item has empty spec, for example "eth / ipv4 / end".
2) The last itme has spec that can't be expanded for RSS.
For example the pattern "eth / ipv4 proto is 47 / end" ends with IPv4
item that has next protocol GRE.
In both cases the flow rule may be expanded, but in the second case such
expansion may create rules with invalid pattern.
For example "eth / ipv4 proto is 47 / udp / end".
In such a case the flow rule should not be expanded.
This patch updates function rte_flow_expand_rss_item_complete().
Return value RTE_FLOW_ITEM_TYPE_END is used to indicate the flow rule
should not be expanded.
In such a case, rte_flow_expand_rss() will return with the original flow
rule only, without any expansion.
Fixes: fc2dd8dd492f ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
A crash is detected when '--txpkts=#' parameter provided to the testpmd,
this is because queue information is requested before queues have been
allocated.
Adding check to queue info APIs
('rte_eth_rx_queue_info_get()' & 'rte_eth_tx_queue_info_get')
to protect against similar cases.
Fixes: ba2fb4f022fc ("ethdev: check if queue setup when getting queue info")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes get current link details, without this change the link
details can be inaccurate if proper lock is not acquired.
Fixes: 739a5b2f2b49 ("net/qede/base: use passed ptt handler")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
There are a few discrepancies in the Rx queue count calculation.
The wrong index is used to calculate the number of used descriptors
in an Rx queue in case of the compressed CQE processing. The global
CQ index is used while we really need an internal index in a single
compressed session to get the right number of elements processed.
The total number of CQs should be used instead of the number of mbufs
to find out about the maximum number of Rx descriptors. These numbers
are not equal for the Multi-Packet Rx queue.
Allow the Rx queue count calculation for all possible Rx bursts since
CQ handling is the same for regular, vectorized, and multi-packet Rx
queues.
Fixes: 26f04883441a ("net/mlx5: support Rx queue count API")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
As metering and metadata features were developed at the same time. The
metering and metadata tables are defined conflicted.
This cause the meter suffix flow jump to the same metadata table and
cause flow deadloop.
Adjust the metering table define to fix that issue.
Fixes: 46a5e6bc6a85 ("net/mlx5: prepare meter flow tables")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Previous patch wrongly used rdma-core defined values, when preparing
attributes for creating DevX CQ object.
This patch adds the correct value definition and uses them instead.
Fixes: 08d1838f645a ("net/mlx5: implement CQ for Rx using DevX API")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
HWRM API to a newer 1.10.1.70 version.
Few fields have been renamed because of this.
rx_err_pkt -> rx_discard_pkts
rx_drop_pkts -> rx_error_pkts
tx_err_pkts -> tx_discard_pkts
tx_drop_pkts -> tx_error_pkts
link_signal_mode -> active_fec_signal_mode
tx_bd_long_hi.mss -> tx_bd_long_hi.kid_or_ts_high_mss
tx_bd_long_hi.hdr_size -> tx_bd_long_hi.kid_or_ts_low_hdr_size
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to select RSS hash based on innermost or outermost
headers. If an application is started without any specific settings
the default mode configured by FW or HW shall be used.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The mbuf library now has routine to free multiple buffers.
Loop is no longer needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
When an error occurs in the reset process, -EIO is returned.
The assignment of ret here is redundant, so deleted it.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The new generation hns3 network engine supports independent enabling and
disabling of a single Tx/Rx queue. So, it can support the queue start
and stop feature. In addition, when different numbers of Tx and Rx
queues need to be enabled in some applications, hns3 pmd does not need
to create fake queues to enable these scenarios.
This patch Add queue start and stop feature for the new generation hns3
networking engine. Cancel the creation of fake queue on the new
generation network engine. And the previously improperly named queue
related function was renamed to improve readability.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, max scheduling rates configuration of pg, pri and port are
set to 100000Mbps, which is the maximum bandwidth of hns3 network engine
with revision_id equals 0x21. However, max scheduling rate configuration
should be set to hardware based on the actual hardware board
environment.
The max_tm_rate in struct hns3_hw, meaning the rate, is obtained from
firmware. So we should use the variable to configure the max scheduling
rate.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
In order to have more flexible selection of shapping algorithm based on
different versions of hns3 network engine, moves the algorithm of
calculating shapping parameter to firmware to execute. If bit
HNS3_TM_RATE_VLD_B of flag field of struct named hns3_pri_shapping_cmd,
hns3_pg_shapping_cmd or hns3_port_shapping_cmd is set to 1, firmware of
network engine, which device revision_id is greater than and equal to
0x30, will recalculate the shapping parameters according to the xxx_rate
field of struct hns3_xxx_shapping_cmd and the opcode of scheduling
level, and configure to hardware.
But driver still needs to calculate shapping parameters and configure
firmware, so as to be compatible with the network engine with
revision_id eqauls 0x21. And the rate and the flag will be ignored based
on the network engine with revision_id equals 0x21.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The API of rte_flow_error_set is used to pass detail error information
to caller, this patch sets suitable type when calling rte_flow_error_set
API.
Fixes: fcba820d9b9e ("net/hns3: support flow director")
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Because the macro named RTE_FLOW_ERROR_TYPE_ACTION_CONF indicates a
action configuration and the macro named RTE_FLOW_ERROR_TYPE_ACTION
indicates a specific action, the driver needs to return
RTE_FLOW_ERROR_ACTION_CONF type and notify the user when a RSS
configuration is invalid with actions list in the internal function
named hns3_parse_rss_filter called by the '.validate' ops implementation
function named hns3_flow_validate.
Besides, this patch removes some unnecessary judgment lines in
hns3_parse_rss_filter.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The maximum number of queues for hns3 PF and VF driver is 64 based on
hns3 network engine with revision_id equals 0x21. Based on hns3 network
engine with revision_id equals 0x30, the hns3 PF PMD driver can support
up to 1280 queues, and hns3 VF PMD driver can support up to 128 queues.
The following points need to be modified to support maximizing queue
number and maintain better compatibility:
1) Maximizing the number of queues for hns3 PF and VF PMD driver In
current version, VF is not supported when PF is driven by hns3 PMD
driver. If maximum queue numbers allocated to PF PMD driver is less
than total tqps_num allocated to this port, all remaining number of
queues are mapped to VF function, which is unreasonable. So we fix
that all remaining number of queues are mapped to PF function.
Using RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF which comes from
configuration file to limit the queue number allocated to PF device
based on hns3 network engine with revision_id greater than 0x30. And
PF device still keep the maximum 64 queues based on hns3 network
engine with revision_id equals 0x21.
Remove restriction of the macro HNS3_MAX_TQP_NUM_PER_FUNC on the
maximum number of queues in hns3 VF PMD driver and use the value
allocated by hns3 PF kernel netdev driver.
2) According to the queue number allocated to PF device, a variable
array for Rx and Tx queue is dynamically allocated to record the
statistics of Rx and Tx queues during the .dev_init ops
implementation function.
3) Add an extended field in hns3_pf_res_cmd to support the case that
numbers of queue are greater than 1024.
4) Use new base address of Rx or Tx queue if QUEUE_ID of Rx or Tx queue
is greater than 1024.
5) Remove queue id mask and use all bits of actual queue_id as the
queue_id to configure hardware.
6) Currently, 0~9 bits of qset_id in hns3_nq_to_qs_link_cmd used to
record actual qset id and 10 bit as VLD bit are configured to
hardware. So we also need to use 11~15 bits when actual qset_id is
greater than 1024.
7) The number of queue sets based on different network engine are
different. We use it to calculate group number and configure to
hardware in the backpressure configuration.
8) Adding check operations for number of Rx and Tx queue user configured
when mapping queue to tc Rx queue numbers under a single TC must be
less than rss_size_max supported by a single TC. Rx and Tx queue
numbers are allocated to every TC by average. So Rx and Tx queue
numbers must be an integer multiple of 2, or redundant queues are not
available.
9) We can specify which packets enter the queue with a specific queue
number, when creating flow table rules by rte_flow API. Currently,
driver uses 0~9 bits to record the queue_id. So it is necessary to
extend one bit field to record queue_id and configure to hardware, if
the queue_id is greater than 1024.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The maximum number of queues for one TC hns3 PF PMD driver supported is
64 based on hns3 network engine with revision_id equals 0x21, while it
is expanded up to 512 on hns3 network engine with revision_id equals
0x30.
So the following points need to be modified to maintain better
compatibility.
1) Using a extended rss_size_max field as the maximum queue number of
one TC PF driver supported.
2) The data type of the RSS redirection table needs to be changed from
uint8_t to uint16_t.
3) rss_tc_mode modification
The bitwidth of tc_offset, meaning the rx queue index, has to expand
from 10 bit to 11 bits. The tc_size, meaning the exponent with base 2
of queues supported on TC, needs to expand from 3 bits to 4 bits.
4) RSS indirection table modification
Currently, a field with 7 bits width is used to record the queue
index for RSS indirection table. It means that PF needs to expand the
queue index field to 9 bits. As the RSS indirection table config
command reserved 4 bytes to configure the RSS queue index, a extern
field can be added. So an entries of RSS indirection table queue
index has two fields to set: rss_result_l and rss_result_h, while
rss_result_l records the lower 8 bits and rss_result_h records the
higher 1 bit.
In addition, 2~4 modifications is also compatible with hns3 VF PMD
driver.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Flow actions are a limited resource on the Cisco VIC, but they
can be shared between flows if they are exactly the same.
Use a hash table and a reference count in the PMD to enable sharing
actions with the same signature between flows.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
In EAL, we try to sort the experimental symbols per the release they
were introduced in.
Fixes: 8929de043eb4 ("service: retrieve lcore active state")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently some of the status string at the top of the stats output is being
cut off. To fix this, the status string array size has been increased.
In addition to this, the "\n" has been moved to the printf, rather than
having it in the last string, in case of future formatting issues due to
truncation.
Bugzilla ID: 536
Fixes: 632bcd9b5d4f ("examples/ioat: print statistics")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
