Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:
drivers/regex/mlx5/mlx5_regex_fastpath.c:398:17: error:
‘len’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
| complete_umr_wqe(qp, sq, &qp->jobs[mkey_job_id], sq->pi,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| klm_num, len);
| ~~~~~~~~~~~~~
drivers/regex/mlx5/mlx5_regex_fastpath.c:315:31: note: ‘len’ was declared here
| uint32_t klm_num = 0, len;
| ^~~
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
In the removal function, PMD releases all driver resources and
cancels the regexdev registry.
However, regexdev registration is accidentally canceled twice.
Remove one of them.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
In the removal function, PMD releases all driver resources allocated
in the probe function.
The MR btree memory is allocated in the probe function, but it is not
freed in remove function what caused a memory leak.
Release it.
Fixes: cda883bbb6 ("regex/mlx5: add dynamic memory registration to datapath")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The issue can cause illegal physical address access while a huge-page A
is released and huge-page B is allocated on the same virtual address.
The old MR can be matched using the virtual address of huge-page B but
the HW will access the physical address of huge-page A which is no more
part of the DPDK process.
Register a driver callback for memory event in order to free out all the
MRs of memory that is going to be freed from the DPDK process.
Fixes: cda883bbb6 ("regex/mlx5: add dynamic memory registration to datapath")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The constant representing the size of the metadata is defined as an
unsigned int variable with 32-bit.
Similarly the constant representing the maximal output is also defined
as an unsigned int variable with 32-bit.
There is potentially overflowing expression when those constants are
evaluated using 32-bit arithmetic, and then used in a context that
expects an expression of type size_t that might be 64-bit.
Change the size of the above constants to size_t.
Fixes: 30d604bb15 ("regex/mlx5: fix type of setup constants")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
To support auxiliary bus, upgrades driver to use mlx5 common driver
structure.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable inc_dir is not defined in this file.
Fixes: 4cd1c5fd9e ("regex/octeontx2: introduce REE driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Guy Kaneti <guyk@marvell.com>
The get_ib_device_match function iterates over the list of ib devices
returned by the get_device_list glue function and returns the ib device
matching the provided address.
Since this function is in use by several drivers, in this patch we
share the function in common part.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Ensure all lists of drivers are standardized:
* one driver per line
* lists double-indented with spaces (as they are line continuations)
* elements in alphabetical order
* opening and closing list brackets "[" & "]" on own lines
* last element has trailing comma
Any code snippets in the list files is adjusted to single-indent using
whitespace to correspond to the new style also.
The lists of standard library dependencies per class, and other short
lists are not formatted one-per-line as these lists are not expected to
grow beyond 2 or 3 entries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Some mlx5 PMDs define the log prefix as "mlx5_pmd" while others as
"pmd_mlx5".
The patch aligns all pmds to use the "mlx5_pmd" format.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
UMR (User-Mode Memory Registration) WQE can present data buffers
scattered within multiple mbufs with single indirect mkey. Take
advantage of the UMR WQE, scattered mbuf in one operation can be
presented to an indirect mkey. The RegEx which only accepts one
mkey can now process the whole scattered mbuf in one operation.
The maximum scattered mbuf can be supported in one UMR WQE is now
defined as 64. The mbufs from multiple operations can be combined
into one UMR WQE as well if there is enough space in the KLM array,
since the operations can address their own mbuf's content by the
mkey's address and length. However, one operation's scattered mbuf's
can't be placed in two different UMR WQE's KLM array, if the UMR
WQE's KLM does not has enough free space for one operation, the
extra UMR WQE will be engaged.
In case the UMR WQE's indirect mkey will be over wrapped by the SQ's
WQE move, the mkey's index used by the UMR WQE should be the index
of last the RegEX WQE in the operations. As one operation consumes
one WQE set, build the RegEx WQE by reverse helps address the mkey
more efficiently. Once the operations in one burst consumes multiple
mkeys, when the mkey KLM array is full, the reverse WQE set index
will always be the last of the new mkey's for the new UMR WQE.
In GGA mode, the SQ WQE's memory layout becomes UMR/NOP and RegEx
WQE by interleave. The UMR and RegEx WQE can be called as WQE set.
The SQ's pi and ci will also be increased as WQE set not as WQE.
For operations don't have scattered mbuf, uses the mbuf's mkey directly,
the WQE set combination is NOP + RegEx.
For operations have scattered mbuf but share the UMR WQE with others,
the WQE set combination is NOP + RegEx.
For operations complete the UMR WQE, the WQE set combination is UMR +
RegEx.
Signed-off-by: John Hurley <jhurley@nvidia.com>
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds support for the timestamp format settings for
the receive and send queues. If the firmware version x.30.1000
or above is installed and the NIC timestamps are configured
with the real-time format, the default zero values for newly
added fields cause the queue creation to fail.
The patch queries the timestamp formats supported by the hardware
and sets the configuration values in queue context accordingly.
Fixes: 92f2c6a30f ("regex/mlx5: add send queue")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
As announced in the deprecation note, remove all compatibility build
defines from previous make/meson versions and use only the standardized
ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The RegEx engine has no limitation on number of queues.
This commits modifies the max supported queues reported to the application.
Fixes: fbc8c7003b ("regex/mlx5: add completion queue creation")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
The high priority match request flags means that the
RegEx engine should stop on the first match.
This commit add this flag check to the RegEx engine.
Signed-off-by: Ori Kam <orika@nvidia.com>
In order to know which groups in the RegEx engine
should be used there is a need to check the req_flags.
This commit adds the missing check.
Fixes: 4d4e245ad6 ("regex/mlx5: support enqueue")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
The rof file holds programming instructions for
a given HW version.
In order to support future generation of HW it
was decided that the rof file will hold number
of rule configurations, and the driver will use
the one that matches the HW version.
In current code we force sync after each write block.
This has impact on performance.
The solution is to move the sync to the end of the
entire programming sequence.
Signed-off-by: Ori Kam <orika@nvidia.com>
Due to Kernel requirement the memory allocated must be aligned to 2M.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
This commit propagate the response flags from the regex engine.
Signed-off-by: Francis Kelly <fkelly@nvidia.com>
Signed-off-by: Ori Kam <orika@nvidia.com>
Sentinel was missing from pci_id_ree_table[] array initialization
which caused it to overflow.
Bugzilla ID: 603
Fixes: 4cd1c5fd9 ("regex/octeontx2: introduce REE driver")
Cc: stable@dpdk.org
Signed-off-by: Guy Kaneti <guyk@marvell.com>
In regex QP setup, the PMD creates some SQ objects.
When SQ object creation is failed, the previous SQ objects memory were
not freed what caused a memory leak.
Free them.
Fixes: 54fa1f6a67 ("regex/mlx5: add teardown for fastpath buffers")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The constant representing the size of the metadata is defined as a
regular number (32-bit signed), even though all of its uses request an
unsigned int variable.
Similarly the constant representing the maximal output is also defined
as a regular number, even though all of its uses request an unsigned int
variable.
Change the type of the above constants to unsigned.
Fixes: 5f41b66d12 ("regex/mlx5: setup fast path")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
During the rules flush, the rxp_poll_csr_for_value function is called
twice. The rxp_poll_csr_for_value function can fail for two reasons:
1. It could not read the value from register, in which case the
function returns -1.
2. It read a value, but not the value it expected to receive. In this
case it returns -EBUSY.
When the function fails it prints an error message that is relevant only
for a second type of failure. Moreover, for failure of the first type it
prints a value of an uninitialized variable.
In case of success, the function prints a debug message about the number
of cycles it took. This line was probably copied by mistake, since the
variable it reads from, is always equal to 0 and is not an indicator of
the number of cycles.
Remove the incorrect line about the cycles, and reduce the error print
only for the relevant error.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The rxp_flush_rules function tries to read and write to the register
several times using DevX API, and when it fails the function returns an
error.
Similarly the rxp_init_eng function also tries to write to the register
several times, and if writing is failed, it returns an error too.
Both functions have one write that the function does not check if it
succeeded, overriding the return value from the write function without
using it.
Add a check for this writing, and return an error in case of failure.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Fixes: e3dbbf718e ("regex/mlx5: support configuration")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The rxp_poll_csr_for_value function defines a variable named ret. It is
the return value of the function, and it is updated to 0 by default
later in the function.
Similarly the rxp_init_rtru function also defines a variable named ret.
The function assigns into it return values from functions during the
function.
In both functions they initialize the ret variable when defining it.
however, in both cases they do not use any ret variable before assigning
into them different values, so the initializations are unnecessary.
Clean the aforementioned unnecessary initializations.
Fixes: e3dbbf718e ("regex/mlx5: support configuration")
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The mlx5_regex_rules_db_import function goes over all engines in the
loop and program rxp rules.
The iterator of the loop is called id and the variable representing the
number of engines is called priv->nb_engines.
The id variable is of uint8_t type while the priv->nb_engines variable
is of uint32_t type. The size of the priv->nb_engines variable is much
larger than the number of iterations allowed by the id type.
Theoretically there may be a situation where the value of the
priv->nb_engines will be greater than can be represented by 8 bits and
the loop will never end.
Change the type of id to uint32_t.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The mlx5_regex_pci_probe function allocates a mlx5_regex_priv structure
using rte_zmalloc.
If the allocation fails, the function jumps to the dev_error label in
order to release previously allocated resources in the function.
However, in the dev_error label it attempts to refer to the internal
fields of the priv structure and if its allocation fails (as in this
case) it is actually dereferencing to NULL.
Replace the jump with an error label.
Fixes: 1db6ebd4ef ("regex/mlx5: fix crash on initialization failure")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch provides the UAR allocation workaround for the
hosts where UAR allocation with Write-Combining memory
mapping type fails.
Fixes: b34d816363 ("regex/mlx5: support rules import")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The drivers for OCTEON TX2 are not supported in 32-bit mode.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This adds the ConnectX-7 and Bluefield-3 device ids to the list of
supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Following the recent alignment of all driver names,
this new driver get unaligned:
librte_regex_octeontx2_regex.so
The 'fmt_name' must be "octeontx2_regex", and if not provided,
is taken from the 'name' variable.
But the variable 'name' should not be overwritten,
to keep the automatic value from the directory name.
The library name will be composed of the class directory
and the driver directory name:
librte_regex_octeontx2.so
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Add missing out of order scan capability
RTE_REGEXDEV_CAPA_QUEUE_PAIR_OOS_F to mlx5 regex PMD.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add meson based build infrastructure along with the
OTX2 regexdev (REE) device functions.
Add Marvell OCTEON TX2 regex guide.
Signed-off-by: Guy Kaneti <guyk@marvell.com>
Currently job data is being copied to pre-registered buffer.
To avoid memcpy on the datapath, use dynamic memory registration.
This change will reduce latency when sending regex jobs. The first few
jobs may have high latency due to registration, but assuming all
following mbufs will arrive from the same mempool/hugepage, there will
be no further memory registration.
Signed-off-by: Yuval Avnery <yuvalav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Added missing code to free Input/Output buffers and memory
registration.
Also added calls to this code in case of error in the qp setup
procedure.
The rollback code itself did not handle rollback properly
and did not check return value from the fastpath setup.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The driver name was registered as "net_mlx5_regex".
It is renamed as "regex_mlx5".
The same name is used in mlx5_regex_driver.pci_driver.driver.name,
instead of "mlx5_regex", for consistency.
The string used for log registration (pmd.regex.mlx5) could be derived
from the driver name. A macro is created so name definitions are close.
Fixes: cfc672a90b ("regex/mlx5: support probing")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@mellanox.com>
When enqueueing a buffer the PMD check if there is room
in its send queue (SQ).
The current implementation did not take into account that
queue indices are wrapping around, which may result in
consumer index (sq->ci) can have bigger value than than
the producer index (sq->pi).
Fixes: 4d4e245ad6 ("regex/mlx5: support enqueue")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Migrate mlx5 net, vdpa and regex PMD to start using mlx5 common class
driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_common is shared library between mlx5 net, VDPA and regex PMD.
It is better to use common initialization helper instead of using
RTE_PRIORITY_CLASS priority.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When fail to initialize the device, avoid segmentation fault while
accessing uninitialized priv.
Fixes: cfc672a90b ("regex/mlx5: support probing")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Add the start, stop and close functions.
In current implementation they are empty functions
and are only exists in order that when called
from rte level, the function will return with success code.
Signed-off-by: Ori Kam <orika@mellanox.com>
