This patch removes the unused message length parameter, we
do not send multiple commands in the single message anymore,
message length can be taken from the prepared message header,
so length parameter can be removed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The assignment should be done after initialization, or it will be zero.
Fixes: 264b23e3d2c1 ("net/i40e: add parameter check for RSS flow init")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Fixes: 64f1c8539c8c ("net/ixgbe: wait longer for link after fiber MAC setup")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There's an issue that X710 can't receive any packet after
reading some special registers. That's because these
registers are only valid for X722, read access for non-X722
will cause ECC error.
Fixes: d9efd0136ac1 ("i40e: add EEPROM and registers dumping")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Using the rte_bsf32 function to find last set bit. This avoids
the for loop and hence the bad bit shift operation.
Coverity issue: 323477
Fixes: 351fbee21986 ("common/cpt: support hash")
Signed-off-by: Ankur Dwivedi <ankur.dwivedi@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
drivers/bus/pci/linux/pci_vfio.c:45:23: error:
‘failure_handle_lock’ defined but not used
Fixes: 8ffe73865124 ("vfio: add lock for hot-unplug failure handler")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When the sigbus handler be enabled for hot-unplug, whatever hot-unplug
sigbus or origin sigbus occur, the sigbus handler will be invoked and
it will access the bus and device. While in the control path, the vfio
req handler also will process the bus and device, so a protection of
the resources in vfio req handler should be need. This patch add a lock
in vfio req handler when process bus and device resource, to avoid the
synchronization issue when device be hot-unplugged.
Fixes: c115fd000c32 ("vfio: handle hotplug request notifier")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
The function otx_cpt_get_resource() would be setting the pointer
'instance'. In case of error, 'instance' would be set to NULL, and
returns rte_errno. If rte_errno when 'instance' is set to NULL, it can
lead to NULL pointer dereferencing.
Coverity Issue: 323486, 323489
Fixes: bfe2ae495ee2 ("crypto/octeontx: add PMD skeleton")
Fixes: 0961348fdf52 ("crypto/octeontx: add queue pair functions")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
If the length of string pointed by 'name' is equal to or greater than
the sizeof cptvf->dev_name string, the resultant string will not be
null terminated. Using strlcpy would make sure the string would always
be null terminated.
Coverity Issue: 323492
Fixes: 0dc1cffa4d33 ("crypto/octeontx: add hardware init routine")
Signed-off-by: Ankur Dwivedi <ankur.dwivedi@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
This patch fixes the queue pair free for AESNI-MB PMD. Originally
the queue pair ring name are different than the object name,
caused the aesni_mb_pmd_qp_release() cannot find the ring to
release. This patch uses the same name between queue pair object
name and ring name.
Fixes: a831c318c54d ("crypto/aesni_mb: free ring memory on queue release")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
File *fp, opened but not closed, this patch add fclose(fp)
Fixes: ef4b04f87fa6 ("crypto/ccp: support device init")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ravi Kumar <ravi1.kumar@amd.com>
There need an parameter check for RSS flow init, or it may cause
core dump if pointer is NULL in memory copy.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For ixgbevf kernel driver, link status changes from down to up
will trigger vf kernel driver send IXGBE_VF_RESET message to pf
kernel driver, after this, vf kernel driver will disable and enable
it self. By these series operations, the vf kernel driver report
link up. Besides, all these operations handles in kernel thread.
For DPDK user space driver, it only gets link status changes from
down to up, but miss IXGBE_VF_RESET message sending and reset itself.
If we will add fully implementation of link status change for DPDK
user space driver, we need take much more modification. We have
aligned that for link status changes from down to up we only notify
link is up, users need to reset vf port.
Fixes: dc66e5fd01b9 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As mlx5_flow_hashfields_adjust() refers to flow->rss, actions must be
translated prior to items like in Verbs. Otherwise, hash fields are not
correctly set.
Fixes: d02cb0691299 ("net/mlx5: add Direct Verbs translate actions")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The current code wrongly assumes that packets are non-TSO and ends up
rejecting large TSO packets. Check non-TSO and TSO max packet sizes
separately.
Fixes: 5a12c387405a ("net/enic: check maximum packet size in Tx prepare handler")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fields in the struct efx_filter_spec_t starting from efs_outer_vid
are hashed for software filter lookup. efs_mark is not a matching
criteria. Exclude efs_mark from hash.
Fixes: 5f78af523912 ("net/sfc: support MARK and FLAG actions in flow API")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tunneling offloads are represented by multi-bit values. So, feature
wise tunneling offload can only be entirely supported/unsupported
using PKT_TX_TUNNEL_MASK. Its upon PMDs to further isolate which of
the tunneling offload types are supported by respective PMD.
Using subset of bits from PKT_TX_TUNNEL_MASK to indicate supported vs
unsupported offloads can lead to undesired result.
Use PKT_TX_TUNNEL_MASK in QEDE_TX_OFFLOAD_MASK and use independent
value of supported PKT_TX_TUNNEL_* in .tx_pkt_prepare() to mark
supported tunnel offloads.
Fixes: 44346c24b790 ("net/qede: fix VXLAN tunnel Tx offload flag setting")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reviewed-by: Rasesh Mody <rasesh.mody@cavium.com>
When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.
This patch fixes the issue by accounting for
rte_pktmbuf_priv_size(pool) and RTE_PKTMBUF_HEADROOM
while configuring first skip register calculation.
Fixes: 197438ee9f18 ("net/octeontx: add Rx queue setup and release ops")
Cc: stable@dpdk.org
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethdev flag RTE_ETH_DEV_CLOSE_REMOVE is set for drivers
having migrated to the new behaviour of rte_eth_dev_close().
As any other flag, it can be useful to know about its value
as soon as the port is probed.
Unfortunately, it was set inside the close operation,
just before being erased by memset() in rte_eth_dev_release_port().
The flag assignment is moved to the probing stage, so it can
be checked by the application in order to anticipate the behaviour.
Fixes: 42603bbdb58e ("net/mlx5: release port on close")
Fixes: 6c99085d972b ("net/vmxnet3: fix hot-unplug")
Fixes: 4d7877fde2ef ("net/ena: remove resources when port is being closed")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, if configuration fails (for example if a 100G card is used
with an odd number of RX/TX queues) QEDE crashes due to a null pointer
dereference.
This commit fixes it by checking that the pointer is not NULL before
using it.
Fixes: 7105b24f4bb8 ("net/qede: fix memory alloc for multiple port reconfig")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
If rule contains tunneling action (like VXLAN encapsulation)
the VTEP (Virtual Tunneling EndPoint) device is pre-configured
before applying the rule. If kernel returns an error this
VTEP configuration should be rolled back to the origin state.
The patch adds the missing VTEP configuration restoration.
Fixes: 95a464cecc21 ("net/mlx5: add E-switch VXLAN tunnel devices management")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The VXLAN related rule cleanup routine queries and gathers all
existing local IP and neigh rules into buffer list. One buffer
may contain multiple rule deletion commands and is prepared
to send into Netlink as single message. But, if error occurs
for some deletion commands in the buffer, the multiple ACK
message with errors can be send back by the kernel. It breaks
the Netlink communication sequence numbers, because we expect
only one ACK message and it smashes out futher Netlik
communication.
The workaround of this problem is to send rule deletion commands
from buffer in one-by-one fashion and get ACK message for every
command sent. We do not expect too may rules preexist, so there
should not be critical performance degradation at VXLAN outer
interface initialization.
Fixes: f420f03d6772 ("net/mlx5: add E-switch VXLAN rule cleanup routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch is preparation for the following fix, we are going to send
Netlink message from buffer in one-by-one fashion. It is highly
desirable to check multimessage buffer consistency for debug purposes.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The Netlink message buffer is allocated and there is the typo,
the other pointer is checked instead of returned one. If no
memory is allocated and NULL is returned by allocation routine
the bug causes segmentation fault. The patch fixes typo,
returned pointer is validated.
Fixes: f420f03d6772 ("net/mlx5: add E-switch VXLAN rule cleanup routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Don't fail the build if pkg-config can't be found, instead print the
linker flag as it was doing before the change.
Fixes: b6b87939193a ("net/mlx5: use pkg-config to handle SUSE libmnl")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Fix the flow_fdir_cmp() function, used by flow_fdir_filter_lookup().
This function is used by flow_fdir_filter_add() to check if same rule
exists, and by flow_fdir_filter_delete() to find flow rule to delete.
The function compared actions conf pointers, changed to compare
actions type only.
Fixes: 2720f833d461 ("net/mlx5: add missing flow director delete")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When stopping a bonded port all slaves are deactivated. Attempting
to deactivate a slave that was never activated will result in a segfault
when mode 4 is used.
Fixes: 7486331308f6 ("net/bonding: stop and deactivate slaves on stop")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
In general the VF driver should not access the chip. For VF link status
update, VF driver should not use HW lock, use bnx2x_link_report_locked()
instead.
Add few prints for releasing previously held HW locks.
Fixes: a9b58b15ed51 ("net/bnx2x: fix to add PHY lock")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Use rte_log() rather than RTE_LOG() for dynamic logging. Rearrange
dynamic log types to the top and configurable log types to bottom.
Remove unused RTE_LIBRTE_BNX2X_DEBUG_TX_FREE
Fixes: ba7eeb035a5f ("net/bnx2x: fix logging to include device name")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For performance reasons, word1 of send_hdr_s
sub descriptor was not cleared assuming it is always
having default value of zero since it comes from fixed
offsets of SQ buffer.
This is causing issues in case of SG mode because,
the size of send command might change and hence the word1
of send_hdr_s is not always at fixed offsets of the SQ buffer
and hence not having default value of zero.
This fixes the issue by clearing the word1 in case of SG mode
for every packet.
Fixes: 1c421f18e095 ("net/thunderx: add single and multi-segment Tx")
Cc: stable@dpdk.org
Signed-off-by: Subrahmanyam Nilla <snilla@caviumnetworks.com>
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Individual MPS TCAM entries are not allocated as separate entities.
All entries are allocated once as an array. So, fix bug with attempting
to free illegal memory location.
Also add missing MPS TCAM initialization for CXGBEVF.
Fixes: 6fda3f0ddda9 ("net/cxgbe: add API to program hardware MPS table")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Set the "value" in the filter spec and not the "mask". Also, remove
duplicate comparison for hardware supported match items already done
earlier.
Fixes: af44a577988b ("net/cxgbe: support to offload flows to HASH region")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Under heavy load, flow related operations can take more time to
complete. Increase max completion wait time to 10 seconds. Also
increase max receive budget to read more replies from firmware
in every cycle.
Fixes: 9eb2c9a48072 ("net/cxgbe: implement flow create operation")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fix issue where ethertype is set to 0x800 for IPv4 by ether match
item and IPv4 match item also inherently sets ethertype to 0x800.
Current logic returns error when IPv4 match item is parsed. So, fix
by only bailing if the redefined match items have different values.
Fixes: ee61f5113b17 ("net/cxgbe: parse and validate flows")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The AltiVec header file breaks boolean type:
error: incompatible types when initializing type
'__vector _bool int' {aka '_vector(4) __bool int'} using type 'int'
If __APPLE_ALTIVEC__ is defined, then bool type is redefined
and conflicts with stdbool.h.
There is no good solution to fix it for the whole project without
breaking something else, so a workaround is inserted in mlx5 PMD.
This workaround is not compatible with C++ but there is no C++ in DPDK.
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Wilder <dwilder@us.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This patch fixes the variable 'phy_word' may be used uninitialized.
Fixes: 5b6439cf03a4 ("e1000/base: support different EEARBC for i210")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In scenarios for multiq or flowq setup failure
`rte_eth_dev_probing_finish()` has to be invoked for successful device
registration.
Fixes: fbe90cdd776c ("ethdev: add probing finish function")
Cc: stable@dpdk.org
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
- Currently, no device supports partial mask for protocol in IP header.
- As there could be multiple IP items, next_protocol variable in flow
validation has to be reset for inner layer. Otherwise, inner TCP/UDP
will see protocol number of outer IP header.
- Remove redundant protocol checking for MPLS, which is done in
mlx5_flow_validate_item_mpls().
Fixes: 3d69434113d1 ("net/mlx5: add Direct Verbs validation function")
Fixes: 23c1d42c7138 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
dev_flow->verbs is mistakenly used instead of dev_flow->dv. A sanity
check is added for debugging purpose.
Fixes: fc2c498ccb94 ("net/mlx5: add Direct Verbs translate items")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Static analysis tools don't like the fact that fd could be zero
in the error path. This won't happen in real world because
stdin would have to be closed, then other error occurring.
Coverity issue: 14079
Fixes: 02f96a0a82d1 ("net/tap: add TUN/TAP device PMD")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
If sysfs directory was incorrectly formatted then the vmbus
setup code would leak a directory handle in the error path.
Coverity issue: 302848
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some toolchain has fls() definition in string.h as argument type int,
which is conflicting uint32_t argument type.
/export/dpdk.org/lib/librte_eal/common/rte_reciprocal.c:47:19:
error: conflicting types for ‘fls’
static inline int fls(uint32_t x)
^~~
/opt/marvell-tools-201/aarch64-marvell-elf/include/strings.h:59:6:
note: previous declaration of ‘fls’ was here
int fls(int) __pure2;
FreeBSD string.h also has fls() with argument as int type.
https://www.freebsd.org/cgi/man.cgi?query=fls&sektion=3
Fixing the conflict by using rte version of fls.
Fixes: ffe3ec811ef5 ("sched: introduce reciprocal divide")
Fixes: faf2b25c9f80 ("fm10k: support VMDQ in multi-queue configuration")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The devargs of a device can be replaced by a newly allocated one
when trying to probe again the same device (multi-process or
multi-ports scenarios). This is breaking some pointer references.
It can be avoided by copying the new content, freeing the new devargs,
and returning the already inserted pointer.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
