The rte_rings traditionally have only supported having ring sizes as powers
of 2, with the actual usable space being the size - 1. In some cases, for
example, with an eventdev where we want to precisely control queue depths
for latency, we need to allow ring sizes which are not powers of two so we
add in an additional ring capacity value to allow that. For existing rings,
this value will be size-1, i.e. the same as the mask, but if the new
EXACT_SZ flag is passed on ring creation, the ring will have exactly the
usable space requested, although the underlying memory size may be bigger.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_memzone_reserve() provides cache line alignment, but
struct rte_ring may require more than cache line alignment: on x86-64,
it needs 128-byte alignment due to PROD_ALIGN and CONS_ALIGN, which are
128 bytes, but cache line size is 64 bytes.
Fixes runtime warnings with UBSan enabled.
Fixes: d9f0d3a1ff ("ring: remove split cacheline build setting")
Cc: stable@dpdk.org
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The error return code for rte_ring_sc_dequeue_bulk() and
rte_ring_mc_dequeue_bulk() function should be -ENOENT rather
than -ENOBUFS as described in the function description.
Fixes: cfa7c9e6fc ("ring: make bulk and burst return values consistent")
Cc: stable@dpdk.org
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The error return code for rte_ring_dequeue() function should be -ENOENT
rather than -ENOBUFS (which is the error value from the enqueue() fn).
Fixes: cfa7c9e6fc ("ring: make bulk and burst return values consistent")
Reported-by: Zhihong Wang <zhihong.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
build error:
include/rte_ring.h:459:22: error: invalid conversion from ‘void*’
to ‘void**’ [-fpermissive]
ENQUEUE_PTRS(r, &r[1], prod_head, obj_table, n, void *);
Implicit casts of void* to void** are considered warnings in some
compilers. E.g. g++ version 5.8. Cast directly to object types
Fixes: a6619414 ("ring: make struct and macros type agnostic")
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
build error:
In file included from .../lib/librte_ring/rte_ring.c(90):
.../lib/librte_ring/rte_ring.h(162):
error #1366: a reduction in alignment without the "packed" attribute
is ignored
} __rte_cache_aligned;
^
Alignment attribute moved to first element of the struct
Fixes: a6619414e0 ("ring: make struct and macros type agnostic")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Modify the enqueue and dequeue macros to support copying any type of
object by passing in the exact object type. Rather than using the "ring"
structure member of rte_ring, which is of type "array of void *", instead
have the macros take the start of the ring a a pointer value, thereby
leaving the rte_ring structure as purely a header value. This allows it
to be reused by other future ring types which can add on extra fields if
they want, or even to have the actual ring elements, of whatever type
stored separate from the ring header.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Both producer and consumer use the same logic for updating the tail
index so merge into a single function.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
We can write a single common function for head manipulation for enq
and a common one for deq, allowing us to have a single worker function
for enq and deq, rather than two of each. Update all other inline
functions to use the new functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The local variable i is only used for loop control so define it in
the enqueue and dequeue blocks directly, rather than at the function
level.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The bulk fns for rings returns 0 for all elements enqueued and negative
for no space. Change that to make them consistent with the burst functions
in returning the number of elements enqueued/dequeued, i.e. 0 or N.
This change also allows the return value from enq/deq to be used directly
without a branch for error checking.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove the watermark support. A future commit will add support for having
enqueue functions return the amount of free space in the ring, which will
allow applications to implement their own watermark checks, while also
being more useful to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There was a compile time setting to enable a ring to yield when
it entered a loop in mp or mc rings waiting for the tail pointer update.
Build time settings are not recommended for enabling/disabling features,
and since this was off by default, remove it completely. If needed, a
runtime enabled equivalent can be used.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The debug option only provided statistics to the user, most of
which could be tracked by the application itself. Remove this as a
compile time option, and feature, simplifying the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The size and mask fields are duplicated in both the producer and
consumer data structures. Move them out of that into the top level
structure so they are not duplicated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
create a common structure to hold the metadata for the producer and
the consumer, since both need essentially the same information - the
head and tail values, the ring size and mask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Users compiling DPDK should not need to know or care about the arrangement
of cachelines in the rte_ring structure. Therefore just remove the build
option and set the structures to be always split. On platforms with 64B
cachelines, for improved performance use 128B rather than 64B alignment
since it stops the producer and consumer data being on adjacent cachelines.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Applications and other libraries should not be reading inside the
rte_ring structure directly to get the ring size. Instead add a fn
to allow it to be queried.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Previous patch updated the functions without updating all the comments.
Fixes: 591a9d7985 ("add FILE argument to debug functions")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: John McNamara <john.mcnamara@intel.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
The extension keyword is used whenever the C99 syntax cannot do it.
This commit prevents the following errors:
error: ISO C forbids zero-size array `[...]'
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use of rte_smb_wmb() instead of rte_smb_rmb() in sc dequeue function
creates the additional overhead of waiting for all the STOREs
to be completed to local buffer from ring buffer memory.
The sc dequeue function demands only LOAD-STORE barrier where LOADs
from ring buffer memory needs to be completed before tail pointer update.
Changing to rte_smb_rmb() to enable the required LOAD-STORE barrier.
Fixes: ecc7d10e44 ("ring: guarantee dequeue ordering before tail update")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Consumer queue dequeuing must be guaranteed to be done fully before
the tail is updated. This is not guaranteed with a read barrier,
changed to a write barrier just before tail update which in practice
guarantees correct order of reads and writes.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A recent patch brought up an issue about the size of the 'name' fields:
85cf0079 mem: avoid memzone/mempool/ring name truncation
These relations should be observed:
1. Each ring creates a memzone with a prefixed name:
RTE_RING_NAMESIZE <= RTE_MEMZONE_NAMESIZE - strlen(RTE_RING_MZ_PREFIX)
2. There are some mempool handlers which create a ring with a prefixed
name:
RTE_MEMPOOL_NAMESIZE <= RTE_RING_NAMESIZE - strlen(RTE_MEMPOOL_MZ_PREFIX)
3. A mempool can create up to RTE_MAX_MEMZONE pre and postfixed memzones:
sprintf(postfix, "_%d", RTE_MAX_MEMZONE)
RTE_MEMPOOL_NAMESIZE <= RTE_MEMZONE_NAMESIZE -
strlen(RTE_MEMPOOL_MZ_PREFIX) - strlen(postfix)
Setting all of them to 32 hides this restriction from the application.
This patch decreases the mempool and ring string size to accommodate for
these prefixes, but it doesn't apply the 3rd constraint. Applications
relying on these constants need to be recompiled, otherwise they'll run
into ENAMETOOLONG issues.
The size of the arrays are kept 32 for ABI compatibility, it can be
decreased next time the ABI changes.
Signed-off-by: Zoltan Kiss <zoltan.kiss@schaman.hu>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Check the return value of snprintf to ensure that the name of
the object is not truncated.
By the way, update the test to avoid to trigger an error in
that case.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Issuing a zero objects dequeue with a single consumer has no effect.
Doing so with multiple consumers, can get more than one thread to succeed
the compare-and-set operation and observe starvation or even deadlock in
the while loop that checks for preceding dequeues. The problematic piece
of code when n = 0:
cons_next = cons_head + n;
success = rte_atomic32_cmpset(&r->cons.head, cons_head, cons_next);
The same is possible on the enqueue path.
Fixes: af75078fec ("first public release")
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
This commit introduce rte_smp_mb(), rte_smp_wmb() and rte_smp_rmb(), in
order to enable memory barriers between lcores.
The patch does not provide any functional change for IA, the goal is to
have infrastructure for weakly ordered machines like ARM to work on DPDK.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When creating a ring, a memzone is created to allocate it in memory,
but the ring could not be freed, as memzones could not be.
Since memzones can be freed now, then rings can be as well,
taking into account if they were initialized using pre-allocated memory
(in which case, memory should be freed externally) or using rte_memzone_reserve
(with rte_ring_create), freeing the memory with rte_memzone_free.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a new field to the rte_ring structure to store the memzone pointer which
contains the ring. For rings created using rte_ring_create(), the field will
be set automatically.
This new field will allow users of the ring to query the numa node a ring is
allocated on, or to get the physical address of the ring, if so needed.
The rte_ring structure will also maintain ABI compatibility, as the
structure members, after the new one, are set to be cache line aligned,
so leaving a space.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add a sched_yield() syscall if the thread spins for too long,
waiting other thread to finish its operations on the ring.
That gives pre-empted thread a chance to proceed and finish
with ring enqueue/dequeue operation.
The purpose is to reduce contention on the ring.
By ring_perf_test, it doesn't shows additional perf penalty.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
ring debug stat won't take care non-EAL thread.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Enqueue and dequeue burst functions always return a positive
value (including 0), so return type should be unsigned,
instead of int.
Fixed also API doc for one of the functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Since the data structures such as rings are shared in their entirety,
those TAILQ pointers are shared as well. Meaning that, after a
successful rte_ring creation, the tailq_next pointer of the last
ring in the TAILQ will be updated with a pointer to a ring which may
not be present in the address space of another process (i.e. a ring
that may be host-local or guest-local, and not shared over IVSHMEM).
Any successive ring create/lookup on the other side of IVSHMEM will
result in trying to dereference an invalid pointer.
This patchset fixes this problem by creating a default tailq entry
that may be used by any data structure that chooses to use TAILQs.
This default TAILQ entry will consist of a tailq_next/tailq_prev
pointers, and an opaque pointer to arbitrary data. All TAILQ
pointers from data structures themselves will be removed and
replaced by those generic TAILQ entries, thus fixing the problem
of potentially exposing local address space to shared structures.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Allow to initialize a ring in an already allocated memory. The rte_ring_create()
function that allocates a ring in a rte_memzone is still available and now uses
the new rte_ring_init() function in order to factorize the code.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
