This path add framework for raw API support.
The initial patch only test cipher only part.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The structure rte_crypto_sym_vec is updated to
add dest_sgl to support out of place processing.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current crypto raw data vectors is extended to support
rte_security usecases, where we need total data length to know
how much additional memory space is available in buffer other
than data length so that driver/HW can write expanded size
data after encryption.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new fields regarding TSO support were not implemented following
feedback, it was decided to implement TSO support by using existing
mbuf fields.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The deprecation notice regarding extending rte_ipsec_sa_prm with a
new field hdr_l3_len is no longer applicable.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add telemetry support for ipsec SAs.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for the IPsec NAT-Traversal use case for Tunnel mode
packets.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for specifying UDP port params for UDP encapsulation option.
RFC3948 section-2.1 does not enforce using specific the UDP ports for
UDP-Encapsulated ESP Header
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added support for AES_CCM, CHACHA20_POLY1305 and AES_GMAC.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Update ipsec_xform definition to include ESN field.
This allows the application to control the ESN starting value.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
As described in [1] and as announced in [2], The field ``dataunit_len``
of the ``struct rte_crypto_cipher_xform`` moved to the end of the
structure and extended to ``uint32_t``.
In this way, sizes bigger than 64K bytes can be supported for data-unit
lengths.
[1] commit d014dddb2d69 ("cryptodev: support multiple cipher
data-units")
[2] commit 9a5c09211b3a ("doc: announce extension of crypto data-unit
length")
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
MEMPOOL_PG_NUM_DEFAULT and MEMPOOL_PG_SHIFT_MAX are not used.
Fixes: fd943c764a63 ("mempool: deprecate xmem functions")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add RTE_ prefix to macro used to register mempool driver.
The old one is still available but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add RTE_ prefix to helper macro to calculate mempool header size and
make it internal. Old macro is still available, but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.
Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When the first port in a given protection domain (PD) starts,
install a mempool event callback for this PD and register all existing
memory regions (MR) for it. When the last port in a PD closes,
remove the callback and unregister all mempools for this PD.
This behavior can be switched off with a new devarg: mr_mempool_reg_en.
On TX slow path, i.e. when an MR key for the address of the buffer
to send is not in the local cache, first try to retrieve it from
the database of registered mempools. Supported are direct and indirect
mbufs, as well as externally-attached ones from MLX5 MPRQ feature.
Lookup in the database of non-mempool memory is used as the last resort.
RX mempools are registered regardless of the devarg value.
On RX data path only the local cache and the mempool database is used.
If implicit mempool registration is disabled, these mempools
are unregistered at port stop, releasing the MRs.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Mempool is a generic allocator that is not necessarily used
for device IO operations and its memory for DMA.
Add MEMPOOL_F_NON_IO flag to mark such mempools automatically
a) if their objects are not contiguous;
b) if IOVA is not available for any object.
Other components can inspect this flag
in order to optimize their memory management.
Discussion: https://mails.dpdk.org/archives/dev/2021-August/216654.html
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Removing the rawdev based octeontx2-ep driver as the dependent
common/octeontx2 will soon be going away. Moreover this driver is no
longer required as the net/octeontx_ep driver is sufficient.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Removing the rawdev based octeontx2-dma driver as the dependent
common/octeontx2 will be soon be going away. Also a new DMA driver will
be coming in this place once the rte_dmadev library is in.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
This patch add control plane API for dmadev.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
The 'dmadev' is a generic type of DMA device.
This patch introduce the 'dmadev' device allocation functions.
The infrastructure is prepared to welcome drivers in drivers/dma/
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Removed offload flag PKT_RX_EIP_CKSUM_BAD. PKT_RX_OUTER_IP_CKSUM_BAD
should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
get_hugepage_dir() was implemented in such a way that a --huge-dir
option had to exactly match the mountpoint, but there's no reason for
this restriction: DPDK might not be the only user of hugepages, and
shouldn't assume it owns an entire mountpoint. For example, if I have
/dev/hugepages/myapp, and /dev/hugepages/dpdk, I should be able to
specify:
--huge-dir=/dev/hugepages/dpdk/
and have DPDK only use that sub-directory.
Fix the implementation to allow a sub-directory within a suitable
hugetlbfs mountpoint to be specified, preferring the closest match.
Signed-off-by: John Levon <john.levon@nutanix.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds tests for inner IP and inner L4 checksum
verification in IPsec mode.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add inner packet IPv4 hdr and L4 checksum enable options
in conf. These will be used in case of protocol offload.
Per SA, application could specify whether the
checksum(compute/verify) can be offloaded to security device.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Proposed change to event crypto metadata is not done as per deprecation
note. Instead, comments are updated in spec to improve readability.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
CN98xx SoC comes up with two CPT blocks wrt
CN96xx, CN93xx, to achieve higher performance.
Adding support to allocate all LFs of VF with even BDF from CPT0
and all LFs of VF with odd BDF from CPT1.
If LFs are not available in one block then they will be allocated
from alternate block.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This implements in PMD the option to drop the CB CRC
after 4G decoding to help transport block concatenation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
This is to support the case for operation
where CRC16 is to be appended or checked.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Adding a missing operation when CRC16
is being used for TB CRC check.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Added support for 256 bit key length for ZUC in
crypto_cn10k PMD.
Added support for digest length of 8 and 16 bytes
for ZUC with 256 bit key length.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add option to indicate whether UDP encapsulation ports
verification need to be done as part of inbound
IPsec processing.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
This patch also changes dpdk-devbind.py to list new inline
device as misc device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The af_packet pmd driver binds to a raw socket and allows sending and
receiving of packets through the kernel.
Since commit [1], the kernel strips the vlan tags early in
__netif_receive_skb_core(), so we receive untagged packets while running
with the af_packet pmd.
Luckily for us, the skb vlan-related fields are still populated from the
stripped vlan tags, so we end up having all the information that we need
in the mbuf.
Having the pmd driver support DEV_RX_OFFLOAD_VLAN_STRIP allows the
application to control the desired vlan stripping behavior, until we
have a way to describe offloads that can't be disabled by pmd drivers.
This patch will cause a change in the default way that the af_packet pmd
treats received vlan-tagged frames. While previously, the application
was required to check the PKT_RX_VLAN_STRIPPED flag, after this patch,
the pmd will re-insert the vlan tag transparently to the user, unless
the DEV_RX_OFFLOAD_VLAN_STRIP is enabled in rxmode.offloads.
I've attempted a preliminary benchmark to understand if the change could
cause a sizable performance hit.
Setup:
Two virtual machines running on top of an ESXi hypervisor
Tx: DPDK app (running on top of vmxnet3 PMD)
Rx: af_packet (running on top of a kernel vmxnet3 interface)
Packet size :68 (packet contains a vlan tag)
Rates:
Tx - 1.419 Mpps
Rx (without vlan insertion) - 1227636 pps
Rx (with vlan insertion) - 1220081 pps
At a first glance, we don't seem to have a large degradation in terms of
packet rate.
[1]
https://github.com/torvalds/linux/commit/bcc6d47903612c3861201cc3a866fb60
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
It was announced that `min` and `max` fields and variables in public
headers will be renamed to avoid clash with `min` and `max` macros
defined in Windows headers. However, it is unnecessary, because these
are function-like macros, which are not expanded unless the next token
is an opening brace. It cannot happen for integer fields and variables.
Remove the deprecation notices.
Fixes: c4379ee599ef ("doc: announce API changes for Windows compatibility")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This patch enables building the ixgbe driver for Windows.
It also enables its dependencies on security and cryptodev.
I tested on AWS using ixgbe VF device, using dpdk-testpmd.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default VF driver for Intel 700 Series Ethernet Controller already
switch to iavf in DPDK 21.05. And i40evf is no need to maintain now,
so remove i40evf related code.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
- Enable IAVF PMD build on Windows
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types
- Fix for pointer and integer sign warnings using Clang compiler on
Windows
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
A quite common scenario with kvargs is to lookup for a <key>=<value> in
a kvlist. For instance, check if name=foo is present in
name=toto,name=foo,name=bar. This is currently done in drivers/bus with
rte_kvargs_process() + the rte_kvargs_strcmp() handler.
This approach is not straightforward, and can be replaced by this new
function.
rte_kvargs_strcmp() is then removed.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
