Mixing numeric macros with bit shifts macros is not a good idea.
Fixes: 011411586e ("net/nfp: extend speed capabilities advertised")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The barrier needs to be after reading the DD bit. It has not been
a problem because the potential reads which can not happen before
reading the DD bit seem to be far enough, so the compiler is not
rescheduling them. However, a refactoring could make this problem
to arise.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Although this can be done by the app, because other PMDs are doing it,
apps expect this behaviour from the PMD.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some apps can enable RSS but not update the reta table nor the hash.
This patch adds a default reta table setup based on total number of
configured rx queues. The hash key is dependent on how the app
configures the rx_conf struct.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP does CRC strip by default and it is not configurable. But, even
if an app requests not to do it, that should not be a reason for PMD
configuration failure.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When jumbo frames is configured, the hardware mtu needs to be updated to
the specified max_rx_pkt_len. Also, changing mtu should be avoided once
the PMD port started.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The wrong mtu length was used for configuring the hardware. The
max_rx_pktlen reported was also wrong.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Not all struct fields will be written and random data could
confuse readers.
Coverity issue: 140755
Fixes: 92aa491b88 ("nfp: add statistics")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF multiport support has some limitations like not allowing plugging or
unplugging of single ports as they all belong to same PCI device.
A previous patch for removing detachable flag introduced a wrong check.
Fixes: 00a3d8104a ("ethdev: remove detachable device flag")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
VFs rely on config BAR for getting the MAC address, although a
random one is created a valid address is not found.
A PF port has a fixed MAC which is currently acquired using the NSPU
interface. Some NFP firmwares require the MAC being writing back
to the config BAR for doing proper MAC filtering.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
These capabilities are enabled in current NFP firmwares by
default, but it could be they are not with NFP firmwares to come.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Link speed is not advertised in old firmwares. However, it is safe
to remove the check because reading NFP_NET_CFG_STS returns 0 in
those cases.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
During initialization, mac address is read from configuration bar. This is
the default option when using VFs.
This patch adds support for reading the mac address using the NSPU
interface when PMD works with the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PMD has to configure the hardware port: link up when port started and
link down when port stopped. This is not required for VFs but it is
for PF ports.
A minor refactoring in PMD stop and close functions is done because the
Link down needs to happen just when device is stopped.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
A NFP PF PCI device can have several physical ports, up to 8. Because
DPDK core creates one eth_dev per PCI device, nfp pf probe function
is used. Number of PF ports is obtained from firmware symbol using
NSPU API. Inside PF probe function an eth_dev per port is created and
nfp_net_init invoked for each port.
There are some limitations regarding multiport: rx interrupts and
device hotplug are not supported.
Interrupts are handled with the VFIO or UIO drivers help. Those
drivers just know about PCI devices, so it is not possible, without
changing how DPDK handles interrupts, manage interrupts assigned to
different PF ports.
About hotplug, the problem is this functionality is based on a PCI
device, and although device plugin is possible, which would add as
many ports as supported by firmware, unplug is based on device name
linked to a eth_dev, and device name has a suffix now (_portX, with X
being the port index) which DPDK core is not aware of. While rx
interrupts with multiport could be likely solved with some layer of
indirection, hotplug would require changes to DPDK core.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP can support several physical ports per PF device. Depending on
firmware info, one or more eth_dev objects will need to be created.
This patch adds the call to create just one eth_dev by now with future
commits supporting the multiport option. Once the eth_dev has been
created, probe function invokes pmd initialization with the new eth_dev.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
nfp_net_init is where a dpdk port related to a eth_dev is initialized.
NFP VF vNICs use VF PCI BARs as they come after SRIOV is enabled. But for
NFP PF vNIC just a subset of PF PCI BARs are used.
This patch adds support for mapping the right PCI BAR subsets for the PF
vNIC. It uses the NSPU API functions introduced previously for configuring
NFP expansion bars.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PMD will use this function for uploading the firmware. First, a
symbol resolution is done for finding out if there is a firmware
already there. If not, a NFP reset is called before using NSPU
fw upload code.
PMD PF probe function is now using this logic.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Configuring the NFP PMD for using the PF requires access through the
NSPU interface for device configuration. This patch adds a specific probe
function for the PF which uses the NSPU interface. Just basic NSPU access
is done by now reading the NSPU ABI version.
NSPU ABI version needs to be greater than 0.19.
No ethernet port is created yet.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
We need to support how firmware metadata was handled until now and also
the new API, since NFP NFD 3.0 firmware versions. The new metadata API
adds flexibility for working with different metadata types and, mainly,
to allow adding metadata from different firmware components independently.
Although this patch just supports one type handled by the PMD, future uses
regarding firmware apps will extend this support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
A DPDK app could, whatever the reason, send packets with size 0.
The PMD is not sending those packets, which does make sense,
but the problem is the mbuf is not released either. That leads
to mbufs not being available, because the app trusts the
PMD will do it.
Although this is a problem related to app wrong behavior, we
should harden the PMD in this regard. Not sending a packet with
size 0 could be problematic, needing special handling inside the
PMD xmit function. It could be a burst of those packets, which can
be easily handled, but it could also be a single packet in a burst,
what is harder to handle.
It would be simpler to just send that kind of packets, which will
likely be dropped by the hw at some point. The main problem is how
the fw/hw handles the DMA, because a dma read to a hypothetical 0x0
address could trigger an IOMMU error. It turns out, it is safe to
send a descriptor with packet size 0 to the hardware: the DMA never
happens, from the PCIe point of view.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
intr_vec was not properly configured. This is not a problem when
just one queue is supported but it fails with multiqueue.
Some minor refactoring also done for hardware interrupt configuration.
Fixes: ea121b2831 ("net/nfp: add Rx interrupts")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Redirection table was not being updated properly.
There is also a problem when configuring RSS.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
If not a valid mac present in configuration bar, PMD creates a random
one. It needs to be passed to the NIC.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
At some places, the log2() function is used despite this function
works on float. This introduces a dependency to the math lib but
most of the time it is not required because we want an integer log2.
Add a new helper to do this job and fix nfp driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If segments are used, just mbufs previously linked to head descriptor
of a mbuf chain are released. Other Tx descriptor are used for the
mbuf chain but they keep their linked mbufs without releasing them.
It is not a fatal issue because sooner or later those descriptors will
be head descriptors or just used for a single mbuf packet, then those
linked mbufs will be released.
However, this leads to apps needing bigger mbufs pools and some
confusion about memory requirements. Indeed, because larger pools, some
performance impact could also be expected due to cache misses.
With this patch all Tx descriptors will release linked mbufs inside the
xmit function, and rte_pktmbuf_seg_free is used instead of
rte_pktmbuf_free.
Fixes: 142854c621 ("nfp: fix freeing multi-mbuf packets")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This driver can use the library function rte_eth_dma_zone_reserve()
instead of duplicating the code.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Current code enables RX interrupts even if this it not
requested.
Fixes: ea121b2831 ("net/nfp: add Rx interrupts")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Chained mbufs hold data_len as the length of that particular mbuf
and pkt_len as the full packet length including all the chained
mbufs. It is not clear from the mbuf definition if pkt_len should
be set for all the mbufs in a chain, but code there for handling
mbufs suggests just the first mbuf requires to have pkt_len set.
NFP PMD was assuming pkt_len is set in all the chained mbufs and
unit tests for gather dma were building mbufs with pkt_len always
set. This patch gets rid of that assumption.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When LSO, not doing this can led to firmware disruption. It does
not show as error because TCP ends up sending data again later on.
Fixes: 9ba3d0ae20 ("net/nfp: add TSO support")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Fix typo when checking that no VLAN offload flags are passed at port
initialization.
By the way, also fix a typo in the log.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Having those modulo operations implies costly instructions execution,
what can be avoided with conditionals and unlikely clauses.
This change makes the software ring read and write indexes to be now
always within the ring size which has to be handled properly. The main
problem is when write pointer wraps and being less than the read pointer.
This happened before, but just with indexes type size (uint32_t) wrapping,
and in that case the processor does the right thing no requiring special
handling by software.
This work has also led to discovering redundant pointers in the driver,
which have been removed.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP supports more speeds than just 40 and 100GB, which were
what was advertised before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Previous reported speed was hardcoded because there was not firmware
support for getting this information. This change needs also to support
old firmware versions, but instead of the previous hardcoded report, no
speed is reported to the user avoiding to give the wrong speed when link
is not configured to 40G.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Because macros for TCP and UDP related to offload cksums have
same values, this was not a main problem. But better to use the
right ones.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Since commit b1fb53a39d ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.
Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
data->drv_name
- for vdev drivers, manually set data->drv_name
At this stage, virtio-user does not properly report a driver name (fixed in
next commit).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With an app using hotplug feature, when a device is unplugged without
unregistering makes the interrupt handling unstable.
Fixes: 6c53f87b34 ("nfp: add link status interrupt")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Pure coding style, but it might make it easier later if we want to move
fields in rte_cryptodev_driver and eth_driver structures.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Use RTE_PCI_DEVICE macro to set all fields rather than explicitly setting
them individually in the code. This shortens the code while helping to
future-proof against future changes to the rte_pci_id structure.
Fixes: 701c8d80c8 ("pci: support class id probing")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RTE_PCI_DRV_DETACHABLE flag is required to indicate that a device
can be detached during execution.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
mbufs were not properly released post-tx when they are chained.
Fixes: b812daadad ("nfp: add Rx and Tx")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Some apps calling some functions from different threads at the
same time could lead to reconfig problems. Reconfig mechanism is
based on a hardware queue where incrementing a counter signals the
firmware to do the reconfig. If there is a second increment before the
first one has been processed the firmware will stop and a device
reset is necessary.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The NFP driver (unlike other PCI devices) was not copying the pci info
from the pci_dev to the eth_dev. This would make the driver_name be
null (and other unset fields) when application uses dev_info_get.
This was found by code review; do not have the hardware.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This structure has immutable function pointers.
Also fix indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When using start-stop functionality the per queue fields need to
be properly reset.
Fixes: b812daadad ("nfp: add Rx and Tx")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Even with tx checksum offload available, do not set the flag by default.
Fixes: b812daadad ("nfp: add Rx and Tx")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The mbuf ol_flags field was changed to uin64_t with DPDK version 1.8
Fixes: b812daadad ("nfp: add Rx and Tx")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The file sys/io.h was included but it can be unavailable in some
non-x86 toolchains.
As others system includes in the file nfp_net.c, it seems useless,
so the easy fix is to remove them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Macros RTE_MBUF_DATA_DMA_ADDR and RTE_MBUF_DATA_DMA_ADDR_DEFAULT
are defined in each PMD driver file. Convert macros to inline
functions and move them to common lib/librte_mbuf/rte_mbuf.h file.
PMD drivers include rte_mbuf.h file directly/indirectly hence no
additioanl header file inclusion is necessary.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
As discussed on list, switch numbering scheme to be based on year/month.
Release 2.3 then becomes 16.04.
Ref: http://dpdk.org/ml/archives/dev/2015-December/030336.html
Also, added zero padding to the month so that it appear as 16.04 and
not 16.4 in "make showversion" and rte_version().
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
