Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Change the parameter bypass_vlvf to vlvf_bypass for consistency
with ixgbe_common.c.
Clean up some whitespace and misalignment.
Change variable type of secrxreg from int to u32 as it's used
to store register value.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, not all shadow RAM accesses are being done under the
protection of a semaphore, which could result in corruption.
Refactor the code so that it is possible to hold the semaphore
around ixgbe_host_interface_command by introducing an unlocked form.
This patch also eliminates the function ixgbe_read_ee_hostif_data_X550
in favor of the function ixgbe_read_ee_hostif_X550.
The new arrangement is able to get both the management interface semaphore
and the EEPROM semaphore at the same time instead of separately.
Fixes: af75078fec ("first public release")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Create flow control (FC) setup and enable functions to configure PHY
registers. These registers advertise FC settings according to the user
requested mode. On link establishment, these settings are negotiated
with the link partner to agree on the settings to use: RX and TX enabled,
TX only enabled, or FC disabled and RX enabled (which also enables TX).
Remove the part of code that performs FC auto-negotiation (AN) in
ixgbe_setup_m88 and put it in a new function to maintain consistency
with other FC AN implementations so far. Add function pointers to the
setup-fc and enable-fc functions so that they get called during init
to perform FC AN.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for enabling Flow Control (FC)
auto-negotiation on X550em_a:
- rename ixgbe_fc_autoneg_x550a() to ixgbe_fc_autoneg_backplane_x550em_a().
- create ixgbe_fc_autoneg_fiber_x550em_a() specifically for fiber.
- add definitions for KRM_PCS_KX_AN_LP register and related bits.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for setting up Flow Control (FC)
on X550em_a fiber:
- rename ixgbe_setup_fc_x550a() to ixgbe_setup_fc_backplane_x550em_a().
- create ixgbe_setup_fc_fiber_x550em_a() to configure FC for fiber.
- add definitions for KRM_AN_CNTL_4 and KRM_PCS_KX_AN along with related
definitions.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fully initialize X550em_a 1G PHYs; move the PHY definitions from
ixgbe_x550.h to ixgbe_phy.h, where they really belong; define
register numbers in decimal because that is how they are in the spec.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds X550a flow control auto negotiation support.
ixgbe_setup_fc_x550a and ixgbe_fc_autoneg_X550a functions are
added to setup and enable flow control. MAC ops function pointer
fc_autoneg was added so that hardware specific fc autoneg functions
can be called from ixgbe_fc_enable_generic.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch limits getting and putting the PHY Token to PHY MDIO
access only by adding ixgbe_read_phy_reg_x550a and
ixgbe_write_phy_reg_x550a. The PHY Token is only needed to
synchronize access to the MDIO shared between the two MAC instance.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Add new X550EM_a devices and their mac types, X550EM_a
and X550EM_a_vf.
Update the code to use the new devices and mac types.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch implements ixgbe_led_on_t_X550em and ixgbe_led_off_t_X550em
function for turning on and off LEDs on X557 external PHY.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds identify SFP module support for x550em. x550em
support returns an error for SFP module types not supported by
x550em design.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds x550em PHY reset function ixgbe_reset_phy_t_X550em.
ixgbe_reset_phy_t_X550em calls the reset PHY generic, and then enables
the x550em PHY LASI(Link Alarm Status Interrupt) interrupts.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds ixgbe_check_link_t_X550em for checking x550em
PHY link. We check that both the MAC and external x550em PHY have link.
This is to avoid a false link up between the internal and external PHY
when the external PHY doesn't have link.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds x550em external PHY interrupt and forced 1G/10G
support. Support includes enabling and handling Link Status
Change and Thermal Sensor interrupt. ixgbe_handle_lasi has been added
to the API for handling the interrupts received from x550em PHY.
ixgbe_enable_lasi_ext_t_x550em and ixgbe_get_lasi_ext_t_x550em have been
added to X550em to enable mask and check interrupt flags for x550em PHY.
Forced 1G/10G link speed is handled via ixgbe_setup_mac_link_t_X550em.
ixgbe_setup_mac_link_t_X550em sets up the internal PHY and
external PHY link to either 10G or 1G based on the user selected auto
advertised link speed setting. Then sets up the external PHY auto
advertised link speed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch cleans up the ixgbe_setup_internal_phy_ x550em() function as follows:
- Renames it to ixgbe_setup_internal_phy_t_x550em to clarify that it is
specific to copper
- Returns an error if called for non-copper devices
- Corrects the comments
- Removed the LASI(Link Alarm Status Interrupt) status register checks as
this was incorrect and never worked correctly anyway.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The following patch moves the handling of the I2C MUX (which is only
used for x550em SFP+ devices) out of the ixgbe_x540.c file and
into the ixgbe_x550.c file where it belongs.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
For the KR backplane which is different from other backplane,
in that we can't use auto-negotiation to determine the
mode. Instead, use whatever the user configured.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds SW Low Power Link Up (LPLU) support for x550em PHY.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds SFP+ dual-speed support.
82599 fiber link code was moved from ixgbe_82599.c to ixgbe_commom.c
for use by X550em, and the API was updated to support the common code
usage. SFP MAC link code is added to x550em.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
