This patch adds the in_hw flag check for tc flower filter rules.
If rule is applied without skip_sw flag set driver should check
whether the in_hw flag is set after rule applying. If no in_hw
flag set found it means the rule is not hardware offloaded and
error should be returned to application.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The tc flower filter rules are used to control E-switch from
the application side. In order to gain garanteed rule hardware
offload the skip_sw flag should be specified while applying the
rule. But some tc rules is rejected by kernel if skip_sw flag
is set by design. Currently this regards VXLAN tunneling rules,
which are applied to special VXLAN virtual devices. Albeit these
rules are applied with skip_sw flag reset kernel tries to
perform hardware offload. If kernel succeeded the in_hw flag
is set in rule properties and application should check this
flag to get know whether the applied rule is actually hardware
offloaded.
This patch prepares for the rule flags query and check in_hw flag.
The driver checks only the rules with skip_sw flag reset, so we
need to test the actual flags of rule is being applied. The pointer
to flags field into translated rule is introduced and flags are
tested directly in the rule body. It is more reliable than save and
check flags copy.
Also patch swaps the flow_tcf_apply() and flow_tcf_remove(),
we are going to call flow_tcf_remove() from flow_tcf_appy() if
no in_hw flag set found in applied rule.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
While receiving the Netlink reply messages we should stop at DONE
or ACK message. The existing implementation stops at DONE message
or if no multiple message flag set ( NLM_F_MULTI). It prevents
the single query requests from working, these requests send the
single reply message without multi-message flag followed by
ACK message. This patch fixes receiving part of Netlink
communication routine.
Fixes: 6e74990b34 ("net/mlx5: update E-Switch VXLAN netlink routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch removes the unused message length parameter, we
do not send multiple commands in the single message anymore,
message length can be taken from the prepared message header,
so length parameter can be removed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The assignment should be done after initialization, or it will be zero.
Fixes: 264b23e3d2 ("net/i40e: add parameter check for RSS flow init")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Fixes: 64f1c8539c ("net/ixgbe: wait longer for link after fiber MAC setup")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There's an issue that X710 can't receive any packet after
reading some special registers. That's because these
registers are only valid for X722, read access for non-X722
will cause ECC error.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
rte_security has been experimental since DPDK 17.11 release.
Now the library has matured and expermental tag is removed in
this patch.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Using the rte_bsf32 function to find last set bit. This avoids
the for loop and hence the bad bit shift operation.
Coverity issue: 323477
Fixes: 351fbee219 ("common/cpt: support hash")
Signed-off-by: Ankur Dwivedi <ankur.dwivedi@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
drivers/bus/pci/linux/pci_vfio.c:45:23: error:
‘failure_handle_lock’ defined but not used
Fixes: 8ffe738651 ("vfio: add lock for hot-unplug failure handler")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Because the user's callback is invoked in eal interrupt callback, the
interrupt callback need to be finished before it can be unregistered
when detaching device. So finish callback soon and use a deferred
removal to detach device is need.
It is a workaround, once the device detaching be moved into the eal in
the future, the deferred removal could be deleted. This patch aim to
add this workaround and refine the function name and the description to
be more explicit and comment the limitation.
Fixes: 2049c5113f ("app/testpmd: use hotplug failure handler")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
When the sigbus handler be enabled for hot-unplug, whatever hot-unplug
sigbus or origin sigbus occur, the sigbus handler will be invoked and
it will access the bus and device. While in the control path, the vfio
req handler also will process the bus and device, so a protection of
the resources in vfio req handler should be need. This patch add a lock
in vfio req handler when process bus and device resource, to avoid the
synchronization issue when device be hot-unplugged.
Fixes: c115fd000c ("vfio: handle hotplug request notifier")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
When device be hot-unplugged, the hot-unplug handler will be invoked by uio
remove event and the device will be detached, then kernel will sent another
pci remove event. So if there is any unlock miss, it will cause a dead lock
issue. This patch will add this missing unlock for hot-unplug handler.
Fixes: 0fc54536b1 ("eal: add failure handling for hot-unplug")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
In rte_efd_create() write lock has already been unlocked
before ring creation itself.
So second unlock after the ring creation has been removed.
Fixes: 56b6ef874f ("efd: new Elastic Flow Distributor library")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the machine definition 'default' which is special compared
to 'native' (most optimized for current system) or any explicit
type (external entity has to decide on the type).
It defaults to the per arch agreed common minimal baseline
needed for DPDK to reasonable work.
That might not be the most optimized, but the most portable
version while still being able to support the CPU features
required for DPDK.
Going forward this can be bumped up by the DPDK project, but it
can never be an invariant like 'native'.
Distributions and other needing portable code are expected to
define the machine as 'default'.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
So far only if machine was "native" it did use the re-direction to
not set -march on ppc64 (where -march is not supported).
We have to use mcpu/mtune in any case on ppc for whatever someone using
the build system defines as machine.
Fixes: 54d609a138 ("build: add ppc64 meson build")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Building on armv7a with meson currenctly fails:
/usr/lib/gcc/arm-linux-gnueabihf/8/include/arm_neon.h:10369:1: error:
inlining failed in call to always_inline ‘vld1q_s32’: target
specific option mismatch
Set -mfpu=neon on that architecture like the legacy makefiles do to fix
the issue.
Fixes: b1d48c4118 ("build: support ARM with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Removed the use of MAP_HUGETLB for anonymous mapping on ppc64. The
MAP_HUGETLB had previously been added to workaround issues on IBM Power8
systems when mapping /dev/zero.
In the current code the MAP_HUGETLB flag will cause the anonymous mapping
to fail on Power9.
Note, Power8 is currently failing to correctly mmap Hugepages, with and
without this change.
Fixes: 284ae3e9ff ("eal/ppc: fix mmap for memory initialization")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeep@us.ibm.com>
It may so happen that two memory locations may be adjacent in
virtual memory, but belong to different segment lists. With
current code, such segments will be concatenated. Fix the
adjacency checking code to also check if the adjacent malloc
elements belong to the same memseg list.
Fixes: 66cc45e293 ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
For IOVA as VA mode, we assume that memory is contiguous. However,
for external segments that assumption may not necessarily hold.
Fix the code to not assume that external memory segments are
contiguous even in IOVA as VA mode.
Fixes: 5282bb1c36 ("mem: allow memseg lists to be marked as external")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The rte_eal_get_runtime_dir() function is currently being declared in two
header files.
This API was made public in commit 6911c9fd8f ("eal: export function to
get runtime directory"), adding it to rte_eal.h. To make it public, the
'rte' prefix was added to the function so it needed to be modified in the
original location of the declaration, eal_filesystem.h. By only modifying,
and not removing the decalration, it is now a duplicate.
This patch removes the declaration from eal_filesystem.h.
Fixes: 6911c9fd8f ("eal: export function to get runtime directory")
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
One of the failure paths were not updated to clean up on exit,
most likely due to rebase error. Fix the failure path to clean
up instead of simply exiting.
Fixes: 3f9e31d71d ("test: clean up on exit")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The value of array index 'i' is out of bound because of the previous
loop it has been used.
Assuming intention is using '0' since the check before free is robufs[0]
check, fixing according.
Fixes: ecd867faa8 ("test/reorder: fix freeing mbuf twice")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Power_acpi_cpufreq_autotest should not be run on VM and platforms
which dont have acpi_cpufreq module loaded.
Hence changed return as TEST_SKIPPED
Fixes: 0ea2dd4409 ("test: skip when required lib not available")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This patch replaces the rte_exit routine with error printing when
init_power_library() fails and by that restores the previous behavior
of the program (which was to issue an error message and continue
working if init_power_library fails). This allows the user to still
experience the Rx interrupts feature of the DPDK demonstrated in
this program.
Fixes: f88e7c175a ("examples/l3fwd-power: add high/regular perf cores options")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: David Hunt <david.hunt@intel.com>
The function otx_cpt_get_resource() would be setting the pointer
'instance'. In case of error, 'instance' would be set to NULL, and
returns rte_errno. If rte_errno when 'instance' is set to NULL, it can
lead to NULL pointer dereferencing.
Coverity Issue: 323486, 323489
Fixes: bfe2ae495e ("crypto/octeontx: add PMD skeleton")
Fixes: 0961348fdf ("crypto/octeontx: add queue pair functions")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
If the length of string pointed by 'name' is equal to or greater than
the sizeof cptvf->dev_name string, the resultant string will not be
null terminated. Using strlcpy would make sure the string would always
be null terminated.
Coverity Issue: 323492
Fixes: 0dc1cffa4d ("crypto/octeontx: add hardware init routine")
Signed-off-by: Ankur Dwivedi <ankur.dwivedi@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
This patch fixes the queue pair free for AESNI-MB PMD. Originally
the queue pair ring name are different than the object name,
caused the aesni_mb_pmd_qp_release() cannot find the ring to
release. This patch uses the same name between queue pair object
name and ring name.
Fixes: a831c318c5 ("crypto/aesni_mb: free ring memory on queue release")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
File *fp, opened but not closed, this patch add fclose(fp)
Fixes: ef4b04f87f ("crypto/ccp: support device init")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ravi Kumar <ravi1.kumar@amd.com>
The patch fixes the memory allocation for the meter DSCP table.
Fixes: e63b50162a ("app/testpmd: clean metering and policing commands")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patches fixes the coverity issue of logically dead code.
Coverity issue: 323523
Fixes: 96303217a6 ("pipeline: add symmetric crypto table action")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
There need an parameter check for RSS flow init, or it may cause
core dump if pointer is NULL in memory copy.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For ixgbevf kernel driver, link status changes from down to up
will trigger vf kernel driver send IXGBE_VF_RESET message to pf
kernel driver, after this, vf kernel driver will disable and enable
it self. By these series operations, the vf kernel driver report
link up. Besides, all these operations handles in kernel thread.
For DPDK user space driver, it only gets link status changes from
down to up, but miss IXGBE_VF_RESET message sending and reset itself.
If we will add fully implementation of link status change for DPDK
user space driver, we need take much more modification. We have
aligned that for link status changes from down to up we only notify
link is up, users need to reset vf port.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As mlx5_flow_hashfields_adjust() refers to flow->rss, actions must be
translated prior to items like in Verbs. Otherwise, hash fields are not
correctly set.
Fixes: d02cb06912 ("net/mlx5: add Direct Verbs translate actions")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds limitation notice for MLX5 PMD.
IPv6 multicast messages are not received on VM when promiscuous
and allmulticast modes are off, due to netlink restriction.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The current code wrongly assumes that packets are non-TSO and ends up
rejecting large TSO packets. Check non-TSO and TSO max packet sizes
separately.
Fixes: 5a12c38740 ("net/enic: check maximum packet size in Tx prepare handler")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fields in the struct efx_filter_spec_t starting from efs_outer_vid
are hashed for software filter lookup. efs_mark is not a matching
criteria. Exclude efs_mark from hash.
Fixes: 5f78af5239 ("net/sfc: support MARK and FLAG actions in flow API")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
`local_conf` variable was needed for offload conversions but no more
required. No functional difference, only interim variable eliminated.
Fixes: ab3ce1e0c1 ("ethdev: remove old offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The device information cannot be gotten correctly before
the configuration is set. Because on some NICs the
information has dependence on the configuration.
Fixes: 3be82f5cc5 ("ethdev: support PMD-tuned Tx/Rx parameters")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The new configuration is stored during the rte_eth_dev_configure() API
but the API may fail. After failure stored configuration will be
invalid since it is not fully applied to the device.
We better roll the configuration back after failure.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tunneling offloads are represented by multi-bit values. So, feature
wise tunneling offload can only be entirely supported/unsupported
using PKT_TX_TUNNEL_MASK. Its upon PMDs to further isolate which of
the tunneling offload types are supported by respective PMD.
Using subset of bits from PKT_TX_TUNNEL_MASK to indicate supported vs
unsupported offloads can lead to undesired result.
Use PKT_TX_TUNNEL_MASK in QEDE_TX_OFFLOAD_MASK and use independent
value of supported PKT_TX_TUNNEL_* in .tx_pkt_prepare() to mark
supported tunnel offloads.
Fixes: 44346c24b7 ("net/qede: fix VXLAN tunnel Tx offload flag setting")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reviewed-by: Rasesh Mody <rasesh.mody@cavium.com>
When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.
This patch fixes the issue by accounting for
rte_pktmbuf_priv_size(pool) and RTE_PKTMBUF_HEADROOM
while configuring first skip register calculation.
Fixes: 197438ee9f ("net/octeontx: add Rx queue setup and release ops")
Cc: stable@dpdk.org
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethdev flag RTE_ETH_DEV_CLOSE_REMOVE is set for drivers
having migrated to the new behaviour of rte_eth_dev_close().
As any other flag, it can be useful to know about its value
as soon as the port is probed.
Unfortunately, it was set inside the close operation,
just before being erased by memset() in rte_eth_dev_release_port().
The flag assignment is moved to the probing stage, so it can
be checked by the application in order to anticipate the behaviour.
Fixes: 42603bbdb5 ("net/mlx5: release port on close")
Fixes: 6c99085d97 ("net/vmxnet3: fix hot-unplug")
Fixes: 4d7877fde2 ("net/ena: remove resources when port is being closed")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts the patch that enables default RSS action by setting
key=NULL and key_len=0.
In current testpmd implementation a key pointer must exist if
key_len!=0. For example, the following flow rule will cause a
segmentation fault:
flow create 0 <pattern> actions rss queues 0 1 end key_len 40 / end
Fixes: a4391f8bae ("app/testpmd: set default RSS key as null")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
