DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new commands to manipulate with dynamic flow type to
pctype mapping table in i40e PMD.
Commands allow to print table, modify it and reset to default value.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
PMDs which expose this offload cap supports optimization for fast release
of mbufs following successful Tx.
Such optimization requires that per queue, all mbufs come from the same
mempool and has refcnt = 1.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Tx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_TX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
In addition the Tx offloads will be disabled by default and be
enabled per application needs. This will much simplify PMD management of
the different offloads.
Applications should set the ETH_TXQ_FLAGS_IGNORE flag on txq_flags
field in order to move to the new API.
The old Tx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Rx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_RX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
Applications should set the ignore_offload_bitfield bit on rxmode
structure in order to move to the new API.
The old Rx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support for parsing the packet type and L2/L3 checksum offload
capability information.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The flow API is supported in TAP PMD if flower is supported in Linux.
Some commands are combined to suggest a convenient check of its support
by the running kernel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- Use rte_malloc() instead of malloc() for the per device 'vdev' structure
so that it can be shared across processes.
- Only initialize the device if the process type is RTE_PROC_PRIMARY
- Only allow the primary process to do queue setup, start/stop, promisc
allmulticast, mac add/del, mtu.
Fixes: fefed3d1e62c ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Mellanox NICs has a limitation on the number of mbuf segments a multi
segment mbuf can have. The max number depends on the Tx offloads
requested.
The current code not enforce such limitation, which might cause
malformed work requests to be written to the device.
This commit adds verification for the number of mbuf segments posted
to the device. In case of overflow the packet will not be sent.
In addition update the nic documentation with the limitation.
Considering device limitation is 63 data segments in a work request, the
maximum number of segment in mbuf was calculated taking TSO as the worst
case:
max_nb_segs = 63 - (control_segment + ethernet segment +
TSO headers inline + inline segment +
extra inline to align to cacheline)
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Extend the LSC event handling to support the device removal as well.
The mlx5 event handling has been made capable of receiving and
signaling several event types at once.
This support includes next:
1. Removal event detection according to the user configuration.
2. Calling to all registered mlx5 removal callbacks.
3. Capabilities extension to include removal interrupt handling.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
NFP PMD implement now PF and VF drivers. Although the driver
functionality is the same by now, except for initialization, it
will change with future PF additions.
A new feature is required for describing the firmware upload
capability coming with the NFP PF now, so the PF file will be
updated soon in another patch.
SRIOV is not supported by the PF yet, and it is wrong to include it
as a VF driver feature, so none of the files have such a feature.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
NFP PMD has now support for both, PF and VFs. This patch updates
the guide and give some information about implications.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
The Verbs API used to implement Tx and Rx burst functions is deprecated.
Drop scatter/gather support to ease refactoring while maintaining basic
single-segment Rx/Tx functionality in the meantime.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement packet type recognition is deprecated.
Support will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement Tx and Rx checksum offloads is deprecated.
Support for these will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs RSS API used in this PMD is now obsolete. It is superseded by an
enhanced API with fewer constraints already used in the mlx5 PMD.
Drop RSS support in preparation for a major refactoring. The ability to
configure several Rx queues is retained, these can be targeted directly by
creating specific flow rules.
There is no need for "ignored" Rx queues anymore since their number is no
longer limited to powers of two.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Only the default port MAC address remains and is not configurable.
This is done in preparation for a major refactoring.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
