As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Fixes the following build failure with gcc 5.4.0 because
of uninitialized variables:
[..]
examples/pipeline/cli.c:1801:10: error: 'idx' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
[..]
examples/pipeline/cli.c:1916:10: error: 'idx' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
[..]
Fixes: 83f58a7b7b0a ("examples/pipeline: add commands for direct registers")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the example CLI scripts with the commands for code generation
and shared object library build.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
Remove the tap CLI command, as the file descriptor I/O ports of the
pipeline are now configured trough the I/O specification file.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
Rework the link CLI command for better alignment with the naming
conventions used in the pipeline I/O specification file. Use the
library linked list of devices and remove the application list.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
Convert the CLI commands to use the pipeline name query API and remove
the linked list of pipeline objects previously maintained by the
application.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
The pipeline mirroring configuration is done through the I/O
specification file, so this CLI command is no longer needed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
The pipeline I/O ports configuration is now done through the I/O
specification file, hence these CLI commands are no longer needed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
The pipeline configuration is now done through the I/O specification
file, hence this CLI command is no longer needed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
Previously, the pipeline build operation was done based on the
specification file (typically produced by the P4 compiler), then the C
code with optimized functions for the pipeline actions and
instructions was generated, built into a shared object library, loaded
and installed into the pipeline in a completely hardcoded and
non-customizable way.
Now, this process is split into three explicit stages:
i) code generation (specification file -> C file);
ii) code build (C file -> shared object library);
iii) code installation (library load into the pipeline).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
Add an unique name to every pipeline. This enables the library to
maintain a list of the existing pipeline objects, which can be
queried by the application.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Kamalakannan R <kamalakannan.r@intel.com>
The P4 language requires marking a header as valid before any of the
header fields are written as opposed to after the writes are done.
Hence, the optimization of replacing the sequence of instructions to
generate a header by reading it from the table action data with a
single DMA internal instruction are reworked from "mov all + validate
-> dma" to "validate + mov all -> dma".
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes the following build failure seen on Ubuntu 16.04
with gcc 5.4.0 because of uninitialized variable:
[..]
examples/pipeline/cli.c:2853:9: error: 'session_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
[..]
Fixes: 172254555f9f ("examples/pipeline: support packet mirroring")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added the rearm counter to the statistics. Updated the learner table
example to the new learner table timer operation.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for the show CLI command to print table entries to a file
instead of standard output.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Harshad Narayane <harshad.suresh.narayane@intel.com>
An additional output port is now implicitly created for every pipeline
to serve as the packet drop port. Up to now, the drop port had to be
explicitly created for each pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Move the table type registration for the well known table types from
the application to the pipeline library.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Move the port type registration for the well known port types from the
application to the pipeline library.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for configurable number of loops through the input PCAP
file for the source port. Added an additional parameter to source
port CLI command.
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The arguments of actions that are learned are now specified as part of
the learn instruction as opposed to being statically specified as part
of the learner table configuration.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the incorrect array out of bounds check within the function
pipeline_selector_group_member_read().
Coverity issue: 371911
Fixes: 598fe0dd0d8e3 ("examples/pipeline: support selector table")
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes the following build failures seen on Ubuntu 16.04
with gcc 5.4.0 because of uninitialized variables:
...
examples/pipeline/cli.c:1559:11: error: 'weight_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:1545:13: error: 'member_id_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:1538:12: error: 'group_id_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2189:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2179:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2265:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2248:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2358:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2325:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
Fixes: 598fe0dd0d8e ("examples/pipeline: support selector table")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add example for FIB with VRF and ECMP support.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
For more flexibility, the single monolithic table update command is
split into table entry add, table entry delete, table default entry
add, pipeline commit and pipeline abort.
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Move pkg-config override to beginning in the Makefile to allow
use PKGCONF variable to detect the libdpdk availability.
Fixes: fda34680eb9a ("examples: remove legacy sections of makefiles")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.
This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.
Fixes: aec9c13c5257 ("eal: add function to release internal resources")
Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f76 ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a174461 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85badc ("examples/ntb: add example for NTB")
Fixes: b77f66002812 ("examples/pipeline: add new example application")
Fixes: edbed86d1cc3 ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c721 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
