This patch adds a call to the newly introduced cleanup()
function just before quitting the app.
Adding this function call before quitting from a secondary processes
is important, as otherwise it will leak hugepage memory. For a secondary
process that is run multiple times, this could cause hugepage memory
to become depleted and stop a secondary process from starting.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This patch adds a call to the newly introduced cleanup()
function just before quitting the pdump app.
Adding this function call before quitting from a secondary processes
is important, as otherwise it will leak hugepage memory. For a secondary
process that is run multiple times, this could cause hugepage memory
to become depleted and stop a secondary process from starting.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This commit adds a new function rte_eal_cleanup().
The function serves as a hook to allow DPDK to release
internal resources (e.g.: hugepage allocations).
This function allows DPDK to become more like an ordinary
library, where the library context itself can be initialized
and cleaned up by the application.
The rte_exit() and rte_panic() functions must be considered,
particularly if they should call rte_eal_cleanup() to release any
resources or not. This patch adds the cleanup to rte_exit(),
but does not clean up on rte_panic(). The reason to not clean
up on panicing is that the developer may wish to inspect the
exact internal state of EAL and hugepages.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This commit moves the rte_service_finalize() function
to be in the component header, and marks it as @internal.
The function is only called internally by rte_eal_finalize().
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Introduce a new helper for pktmbuf pool, which will allow
the application to optionally specify the mempool ops name
as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
At present the userdefined mempool ops name overwrites
the default mempool ops name variable in internal_config.
This patch change the logic to maintain the value of
user defined only in the internal config.
The pktmbuf_create_pool is updated to reflect the same ie.
use user defined. If not present than use the default.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch prefix the mbuf pool ops name with "user" to indicate
that it is user defined.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
For consistency with the Rx flags, the flags PKT_TX_VLAN_PKT and
PKT_TX_QINQ_PKT are respectively renamed as PKT_TX_VLAN and
PKT_TX_QINQ. The old defines are deprecated but will stay for some time
for compatibility.
Reported-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not panic when calling rte_pktmbuf_free(NULL) with mbuf debug
enabled, it is a valid operation.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
On x86 it is possible to use lock-prefixed instructions to get
the similar effect as mfence.
As pointed by Java guys, on most modern HW that gives a better
performance than using mfence:
https://shipilev.net/blog/2014/on-the-fence-with-dependencies/
That patch adopts that technique for rte_smp_mb() implementation.
On BDW 2.2 mb_autotest on single lcore reports 2X cycle reduction,
i.e. from ~110 to ~55 cycles per operation.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Simple functional test for rte_smp_mb() implementations.
Also when executed on a single lcore could be used as rough
estimation how many cycles particular implementation of rte_smp_mb()
might take.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
On thunderx and octeontx, ring_perf_autotest and
ring_pmd_perf_autotest test shows better performance
when disabling CONFIG_RTE_RING_USE_C11_MEM_MODEL.
On the other hand, Enabling CONFIG_RTE_RING_USE_C11_MEM_MODEL
shows better performance on thunderx2.
Since thunderx2 is using the default armv8 config,
no particular change is required.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch is to support C11 memory model barrier in librte_ring.
There are 2 barrier implementation options in librte_ring (suggested
by Jerin).
1. use rte_smp_rmb
2. use load_acquire/store_release(refer to [1]).
The reason why providing 2 options is the performance benchmark
difference in different arm machines, refer to [2].
CONFIG_RTE_RING_USE_C11_MEM_MODEL is provided, and by default it is "n"
on any architectures and only "y" on arm64 so far.
[1] https://github.com/freebsd/freebsd/blob/master/sys/sys/buf_ring.h#L170
[2] http://dpdk.org/ml/archives/dev/2017-October/080861.html
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Move the common part of rte_ring.h into rte_ring_generic.h.
Move the memory barrier part into update_tail().
No functional changes here.
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
for the code as follows:
if (condition)
rte_smp_rmb();
else
rte_smp_wmb();
Without this patch, compiler will report this error:
error: 'else' without a previous 'if'
Fixes: 84733fd0d7 ("eal/arm64: fix memory barrier definition")
Cc: stable@dpdk.org
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Polling a new packet is basically sensing the generation bit in a
completion entry. For some processors not having strongly-ordered memory
model, there has to be a memory barrier between reading the generation bit
and other fields of the entry in order to guarantee data is not stale.
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit introduces rte_cio_wmb() and rte_cio_rmb(), in order to
guarantee the ordering of coherent shared memory between the CPU and a DMA
capable device.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This commit provides a set of tests for verifying the correctness and
performance of both unsigned 32 and 64bit reciprocal based division.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Currently, rte_reciprocal only supports unsigned 32bit divisors. This
commit adds support for unsigned 64bit divisors.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
In some use cases of integer division, denominator remains constant and
numerator varies. It is possible to optimize division for such specific
scenarios.
The librte_sched uses rte_reciprocal to optimize division so, moving it to
eal/common would allow other libraries and applications to use it.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
The rte_service_finalize routine checks if service is initialized
or not. If yes; releases internal memory for services and lcore
states are freed. This routine is to be invoked at end of application
termination.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Free allocated memory of the rule if not added to the table.
Coverity issue: 257032
Fixes: 50bdac5916 ("flow_classify: remove table id parameter from API")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The __rte_cache_aligned was applied to the whole array,
not the array elements. This leads to a false sharing between
the monitored cores.
Fixes: e70a61ad50 ("keepalive: export states")
Cc: stable@dpdk.org
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The result buffer was not initialized before parsing, inducing garbage
in unused fields or padding of the parsed structure.
Initialize the result buffer each time before parsing.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When using dynamic tokens, the result buffer contains pointers to some
location inside the result buffer. When the content of the temporary
buffer is copied in the final one, these pointers still point to the
temporary buffer.
This works until the temporary buffer is kept intact, but the next
commit introduces a memset() that breaks this assumption.
This commit keeps the successfully parsed buffers, and ensures that the
pointers point to the valid location, by using temp buffer for following
parsing.
Fixes: 9b3fbb051d ("cmdline: fix parsing")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit ensures that if that if we run out of memory
during the initialization of the service library, that the
first allocated memory is correctly freed instead of leaked.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
It is unnecessary to cast from void * to struct rte_mbuf *,
the change can make code clearer.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix build issue with pdf guides. Some indentations in the bbdev test
application doc were causing build failures. Latex Log message:
doc.log:! LaTeX Error: Too deeply nested.
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
ICC reports the issue at compile time as follows.
error #592: variable "i" is used before its value is set
RTE_SET_USED(i);
The patch is to fix it. GCC and CLANG has been tested as well.
Fixes: d548ef513c ("event/opdl: add unit tests")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
Remove CFLAGS -std=c11 and -pedantic in order to guarantee
a successful vdev_netvsc compilation on old Linux distributions.
Otherwise old GCC compilers may complain as follows:
cc1: error: unrecognized command line option -std=c11
Fixes: 6086ab3bb3 ("net/vdev_netvsc: introduce Hyper-V platform driver")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
eBPF has a graceful approach: it must successfully compile on all Linux
distributions. If a specific kernel cannot support eBPF it will gracefully
refuse the eBPF netlink message sent to it.
The kernel header file linux/bpf.h (if present) on different Linux
distributions may not include all definitions required for TAP
compilation.
In order to guarantee a successful eBPF compilation everywhere all the
required definitions for TAP have been locally added instead of including
file <linux/bpf.h>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit reworks the loop counter variable declarations
to be in line with the DPDK source code.
Fixes: 3c7f3dcfb0 ("event/opdl: add PMD main body and helper function")
Fixes: 8ca8e3b48e ("event/opdl: add event queue config get/set")
Fixes: d548ef513c ("event/opdl: add unit tests")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
align the config option name with config/common_base
Fixes: aaa4a221da ("event/sw: add new software-only eventdev driver")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
No config option changed, added or removed.
Only reshuffle PMD config options mostly to help new PMDs where to put
their new config option.
Ordered as physical, paravirtual and virtual groups. Alphabetical order
within a group.
Also tried to group vendor devices together which breaks alphabetical
order in some places.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update "port" function argument variable to "port_id" in public
header to be consistent in all APIs.
No functional change.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
