Fix return value, using -EAGAIN instead of 0 when the callback is busy
and using -ENOENT instead of 0 when the callback is not found.
Fixes: a753e53d51 ("eal: add device event monitor framework")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The event_cb->dev_name is not freed when freeing event_cb,
and this causes a memory leak.
Fixes: a753e53d51 ("eal: add device event monitor framework")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
In rte_efd_create() allocated memory for tailq entry, we should
free it when error happens, otherwise it will lead to memory leak.
Fixes: 56b6ef874f ("efd: new Elastic Flow Distributor library")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
jhash has been forgotten when factorising the x86 arch check.
Fixes: dbf17d44f3 ("hash: use common x86 flag")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Libraries can use the headers variable to install headers.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 63b3907833 ("build: remove library name from version map file name")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When the memory for uevent.devname is allocated in dev_uev_parse(). It
is not freed when parse the subsystem layer fails in dev_uev_parse().
Before return, it is also not freed in dev_uev_handler(). These cause a
memory leak.
Fixes: 0d0f478d04 ("eal/linux: add uevent parse and process")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Following the addition of the in_addr/in6_addr structs
to in.h the header file must have stdint.h included
for the definitions of the uint8_t/uint32_t types used
within the new structs.
Not having it could results in the following errors
in places where in.h is included:
in.h:30:2: error: unknown type name 'uint32_t'
uint32_t s_addr;
in.h:34:2: error: unknown type name 'uint8_t'
uint8_t s6_addr[16];
Fixes: f40a74cfcf ("eal/windows: improve compatibility networking headers")
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add a macro that causes GCC and CLANG to emit a warning when
a deprecated macro is used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rename new rte_flow ops callbacks to emphasize relation to tunnel
offload API.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Fixes spelling in comment and message about thread error.
Found while looking at checkpatch complaints about "thead"
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path. These checks are added in the check alg helper functions.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When choosing the vector path, max SIMD bitwidth is now checked to
ensure the vector path is suitable. To do this, the scalar function is
chosen by default in the struct, but at node initialisation time, this
function pointer is updated to the vector version if supported, and
if it is within the max SIMD bitwidth limit.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
The vector path was initially chosen in RTE_INIT, however this is no
longer suitable as we cannot check the max SIMD bitwidth at that time.
Default handlers are now chosen on initialisation, these default
handlers are used the first time the crc calc is called, and they set
the suitable handlers to be used going forward.
Suggested-by: Jasvinder Singh <jasvinder.singh@intel.com>
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU
enabled path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch adds a max SIMD bitwidth EAL configuration. The API allows
for an app to set this value. It can also be set using EAL argument
--force-max-simd-bitwidth, which will lock the value and override any
modifications made by the app.
Each arch has a define for the default SIMD bitwidth value, this is used
on EAL init to set the config max SIMD bitwidth.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
By using the alloc_size() attribute the compiler can optimize
better and detect errors at compile time.
For example, Gcc will fail one of the invalid allocation examples
in app/test/test_malloc.c because the allocation is outside the
limits of memory.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The existing definition of rte_epoll_wait retries if interrupted
by a signal. This behavior makes it hard to use rte_epoll_wait
for applications that want to use signals do do things like
exit polling loop and shutdown.
Since changing existing semantic might break applications, add
a new rte_epoll_wait_interruptible() function that does the
same thing as rte_epoll_wait but will return -1 and errno of EINTR
if it receives a signal.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
The patch clears distributors returns buffer
in clear_returns() by setting start and count to 0.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
rte_distributor_flush() is using total_outstanding()
function to calculate if it should still wait
for processing packets. However in burst mode
only backlog packets were counted.
This patch fixes that issue by counting also in flight
packets. There are also sum fixes to properly keep
count of in flight packets for each worker in bufs[].count.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
Fix improper indexes while comparing tags.
In the find_match_scalar() function:
* j iterates over flow tags of following packets;
* w iterates over backlog or in flight tags positions.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
After introducing burst API there were some artefacts in the
API documentation from legacy single API.
Also the rte_distributor_poll_pkt() function return values
mismatched the implementation.
Fixes: c0de0eb82e ("distributor: switch over to new API")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
In the single legacy version of the distributor synchronization
requires continues exchange of buffers between distributor
and workers. Empty buffers are sent if only handshake
synchronization is required.
However calls to the rte_distributor_return_pkt()
with 0 buffers in single mode were ignored and not passed to the
legacy algorithm implementation causing lack of synchronization.
This patch fixes this issue by passing NULL as buffer which is
a valid way of sending just synchronization handshakes
in single mode.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
The burst version of distributor implementation was missing proper
handling of worker shutdown. A worker processing packets received
from distributor can call rte_distributor_return_pkt() function
informing distributor that it want no more packets. Further calls to
rte_distributor_request_pkt() or rte_distributor_get_pkt() however
should inform distributor that new packets are requested again.
Lack of the proper implementation has caused that even after worker
informed about returning last packets, new packets were still sent
from distributor causing deadlocks as no one could get them on worker
side.
This patch adds handling shutdown of the worker in following way:
1) It fixes usage of RTE_DISTRIB_VALID_BUF handshake flag. This flag
was formerly unused in burst implementation and now it is used
for marking valid packets in retptr64 replacing invalid use
of RTE_DISTRIB_RETURN_BUF flag.
2) Uses RTE_DISTRIB_RETURN_BUF as a worker to distributor handshake
in retptr64 to indicate that worker has shutdown.
3) Worker that shuts down blocks also bufptr for itself with
RTE_DISTRIB_RETURN_BUF flag allowing distributor to retrieve any
in flight packets.
4) When distributor receives information about shutdown of a worker,
it: marks worker as not active; retrieves any in flight and backlog
packets and process them to different workers; unlocks bufptr64
by clearing RTE_DISTRIB_RETURN_BUF flag and allowing use in
the future if worker requests any new packets.
5) Do not allow to: send or add to backlog any packets for not
active workers. Such workers are also ignored if matched.
6) Adjust calls to handle_returns() and tags matching procedure
to react for possible activation deactivation of workers.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
rte_distributor_request_pkt and rte_distributor_get_pkt dereferenced
oldpkt parameter when in RTE_DIST_ALG_SINGLE even if number
of returned buffers from worker to distributor was 0.
This patch passes NULL to the legacy API when number of returned
buffers is 0. This allows passing NULL as oldpkt parameter.
Distributor tests are also updated passing NULL as oldpkt and
0 as number of returned packets, where packets are not returned.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
Synchronization of data exchange between distributor and worker cores
is based on 2 handshakes: retptr64 for returning mbufs from workers
to distributor and bufptr64 for passing mbufs to workers.
Without proper order of verifying those 2 handshakes a deadlock may
occur. This can happen when worker core wants to return back mbufs
and waits for retptr handshake to be cleared while distributor core
waits for bufptr to send mbufs to worker.
This can happen as worker core first returns mbufs to distributor
and later gets new mbufs, while distributor first releases mbufs
to worker and later handle returning packets.
This patch fixes possibility of the deadlock by always taking care
of returning packets first on the distributor side and handling
packets while waiting to release new.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
rte_distributor_return_pkt function which is run on worker cores
must wait for distributor core to clear handshake on retptr64
before using those buffers. While the handshake is set distributor
core controls buffers and any operations on worker side might overwrite
buffers which are unread yet.
Same situation appears in the legacy single distributor. Function
rte_distributor_return_pkt_single shouldn't modify the bufptr64 until
handshake on it is cleared by distributor lcore.
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The API ``rte_security_session_create`` takes only single
mempool for session and session private data. So the
application need to create mempool for twice the number of
sessions needed and will also lead to wastage of memory as
session private data need more memory compared to session.
Hence the API is modified to take two mempool pointers
- one for session and one for private data.
This is very similar to crypto based session create APIs.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Prefix static function and variables with 'eth_dev'.
For some 'rte_' prefix dropped, and for others 'eth_dev' added.
This is useful to differentiate public and static function/variables.
The cleanup is good to for having consistent naming to help new
additions naming.
No functional change, only naming.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Gaetan Rivet <grive@u256.net>
Use ENODEV as the error code if specified port ID is invalid.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Queue stats will be removed from basic stats to xstats.
It will be PMDs responsibility to fill queue stats based on number of
queues they have.
Until all PMDs implement the xstats, a temporary
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' device flag created. PMDs switched
to the xstats should clear this flag to bypass the ethdev layer autofill
for queue stats.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_dev_stop() return value from void to int
and return negative errno values in case of error conditions.
Also update the usage of the function in ethdev according to
the new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API function rte_eth_dev_close() was returning void.
The return type is changed to int for notifying of errors.
If an error happens during a close operation,
the status of the port is undefined,
a maximum of resources having been freed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The DPDK datapath in the transmit direction is very flexible.
An application can build the multi-segment packet and manages
almost all data aspects - the memory pools where segments
are allocated from, the segment lengths, the memory attributes
like external buffers, registered for DMA, etc.
In the receiving direction, the datapath is much less flexible,
an application can only specify the memory pool to configure the
receiving queue and nothing more. In order to extend receiving
datapath capabilities it is proposed to add the way to provide
extended information how to split the packets being received.
The new offload flag RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT in device
capabilities is introduced to present the way for PMD to report to
application about supporting Rx packet split to configurable
segments. Prior invoking the rte_eth_rx_queue_setup() routine
application should check RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT flag.
The following structure is introduced to specify the Rx packet
segment for RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT offload:
struct rte_eth_rxseg_split {
struct rte_mempool *mp; /* memory pools to allocate segment from */
uint16_t length; /* segment maximal data length,
configures "split point" */
uint16_t offset; /* data offset from beginning
of mbuf data buffer */
uint32_t reserved; /* reserved field */
};
The segment descriptions are added to the rte_eth_rxconf structure:
rx_seg - pointer the array of segment descriptions, each element
describes the memory pool, maximal data length, initial
data offset from the beginning of data buffer in mbuf.
This array allows to specify the different settings for
each segment in individual fashion.
rx_nseg - number of elements in the array
If the extended segment descriptions is provided with these new
fields the mp parameter of the rte_eth_rx_queue_setup must be
specified as NULL to avoid ambiguity.
There are two options to specify Rx buffer configuration:
- mp is not NULL, rrx_conf.rx_nseg is zero, it is compatible
configuration, follows existing implementation, provides
the single pool and no description for segment sizes
and offsets.
- mp is NULL, rx_conf.rx_seg is not NULL, rx_conf.rx_nseg is not
zero, it provides the extended configuration, individually for
each segment.
f the Rx queue is configured with new settings the packets being
received will be split into multiple segments pushed to the mbufs
with specified attributes. The PMD will split the received packets
into multiple segments according to the specification in the
description array.
For example, let's suppose we configured the Rx queue with the
following segments:
seg0 - pool0, len0=14B, off0=2
seg1 - pool1, len1=20B, off1=128B
seg2 - pool2, len2=20B, off2=0B
seg3 - pool3, len3=512B, off3=0B
The packet 46 bytes long will look like the following:
seg0 - 14B long @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B long @ 128 in mbuf from pool1
seg2 - 12B long @ 0 in mbuf from pool2
The packet 1500 bytes long will look like the following:
seg0 - 14B @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B @ 128 in mbuf from pool1
seg2 - 20B @ 0 in mbuf from pool2
seg3 - 512B @ 0 in mbuf from pool3
seg4 - 512B @ 0 in mbuf from pool3
seg5 - 422B @ 0 in mbuf from pool3
The offload RTE_ETH_RX_OFFLOAD_SCATTER must be present and
configured to support new buffer split feature (if rx_nseg
is greater than one).
The split limitations imposed by underlying PMD is reported
in the new introduced rte_eth_dev_info->rx_seg_capa field.
The new approach would allow splitting the ingress packets into
multiple parts pushed to the memory with different attributes.
For example, the packet headers can be pushed to the embedded
data buffers within mbufs and the application data into
the external buffers attached to mbufs allocated from the
different memory pools. The memory attributes for the split
parts may differ either - for example the application data
may be pushed into the external memory located on the dedicated
physical device, say GPU or NVMe. This would improve the DPDK
receiving datapath flexibility with preserving compatibility
with existing API.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_flow API provides the building blocks for vendor-agnostic flow
classification offloads. The rte_flow "patterns" and "actions"
primitives are fine-grained, thus enabling DPDK applications the
flexibility to offload network stacks and complex pipelines.
Applications wishing to offload tunneled traffic are required to use
the rte_flow primitives, such as group, meta, mark, tag, and others to
model their high-level objects. The hardware model design for
high-level software objects is not trivial. Furthermore, an optimal
design is often vendor-specific.
When hardware offloads tunneled traffic in multi-group logic,
partially offloaded packets may arrive to the application after they
were modified in hardware. In this case, the application may need to
restore the original packet headers. Consider the following sequence:
The application decaps a packet in one group and jumps to a second
group where it tries to match on a 5-tuple, that will miss and send
the packet to the application. In this case, the application does not
receive the original packet but a modified one. Also, in this case,
the application cannot match on the outer header fields, such as VXLAN
vni and 5-tuple.
There are several possible ways to use rte_flow "patterns" and
"actions" to resolve the issues above. For example:
1 Mapping headers to a hardware registers using the
rte_flow_action_mark/rte_flow_action_tag/rte_flow_set_meta objects.
2 Apply the decap only at the last offload stage after all the
"patterns" were matched and the packet will be fully offloaded.
Every approach has its pros and cons and is highly dependent on the
hardware vendor. For example, some hardware may have a limited number
of registers while other hardware could not support inner actions and
must decap before accessing inner headers.
The tunnel offload model resolves these issues. The model goals are:
1 Provide a unified application API to offload tunneled traffic that
is capable to match on outer headers after decap.
2 Allow the application to restore the outer header of partially
offloaded packets.
The tunnel offload model does not introduce new elements to the
existing RTE flow model and is implemented as a set of helper
functions.
For the application to work with the tunnel offload API it
has to adjust flow rules in multi-table tunnel offload in the
following way:
1 Remove explicit call to decap action and replace it with PMD actions
obtained from rte_flow_tunnel_decap_and_set() helper.
2 Add PMD items obtained from rte_flow_tunnel_match() helper to all
other rules in the tunnel offload sequence.
VXLAN Code example:
Assume application needs to do inner NAT on the VXLAN packet.
The first rule in group 0:
flow create <port id> ingress group 0
pattern eth / ipv4 / udp dst is 4789 / vxlan / end
actions {pmd actions} / jump group 3 / end
The first VXLAN packet that arrives matches the rule in group 0 and
jumps to group 3. In group 3 the packet will miss since there is no
flow to match and will be sent to the application. Application will
call rte_flow_get_restore_info() to get the packet outer header.
Application will insert a new rule in group 3 to match outer and inner
headers:
flow create <port id> ingress group 3
pattern {pmd items} / eth / ipv4 dst is 172.10.10.1 /
udp dst 4789 / vxlan vni is 10 /
ipv4 dst is 184.1.2.3 / end
actions set_ipv4_dst 186.1.1.1 / queue index 3 / end
Resulting of the rules will be that VXLAN packet with vni=10, outer
IPv4 dst=172.10.10.1 and inner IPv4 dst=184.1.2.3 will be received
decapped on queue 3 with IPv4 dst=186.1.1.1
Note: The packet in group 3 is considered decapped. All actions in
that group will be done on the header that was inner before decap. The
application may specify an outer header to be matched on. It's PMD
responsibility to translate these items to outer metadata.
API usage:
/**
* 1. Initiate RTE flow tunnel object
*/
const struct rte_flow_tunnel tunnel = {
.type = RTE_FLOW_ITEM_TYPE_VXLAN,
.tun_id = 10,
}
/**
* 2. Obtain PMD tunnel actions
*
* pmd_actions is an intermediate variable application uses to
* compile actions array
*/
struct rte_flow_action **pmd_actions;
rte_flow_tunnel_decap_and_set(&tunnel, &pmd_actions,
&num_pmd_actions, &error);
/**
* 3. offload the first rule
* matching on VXLAN traffic and jumps to group 3
* (implicitly decaps packet)
*/
app_actions = jump group 3
rule_items = app_items; /** eth / ipv4 / udp / vxlan */
rule_actions = { pmd_actions, app_actions };
attr.group = 0;
flow_1 = rte_flow_create(port_id, &attr,
rule_items, rule_actions, &error);
/**
* 4. after flow creation application does not need to keep the
* tunnel action resources.
*/
rte_flow_tunnel_action_release(port_id, pmd_actions,
num_pmd_actions);
/**
* 5. After partially offloaded packet miss because there was no
* matching rule handle miss on group 3
*/
struct rte_flow_restore_info info;
rte_flow_get_restore_info(port_id, mbuf, &info, &error);
/**
* 6. Offload NAT rule:
*/
app_items = { eth / ipv4 dst is 172.10.10.1 / udp dst 4789 /
vxlan vni is 10 / ipv4 dst is 184.1.2.3 }
app_actions = { set_ipv4_dst 186.1.1.1 / queue index 3 }
rte_flow_tunnel_match(&info.tunnel, &pmd_items,
&num_pmd_items, &error);
rule_items = {pmd_items, app_items};
rule_actions = app_actions;
attr.group = info.group_id;
flow_2 = rte_flow_create(port_id, &attr,
rule_items, rule_actions, &error);
/**
* 7. Release PMD items after rule creation
*/
rte_flow_tunnel_item_release(port_id,
pmd_items, num_pmd_items);
References
1. https://mails.dpdk.org/archives/dev/2020-June/index.html
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
RTE flow items & actions use positive values in item & action type.
Negative values are reserved for PMD private types. PMD
items & actions usually are not exposed to application and are not
used to create RTE flows.
The patch allows applications with access to PMD flow
items & actions ability to integrate RTE and PMD items & actions
and use them to create flow rule.
RTE flow item or action conversion library accepts positive known
element types with predefined sizes only. Private PMD items and
actions do not fit into this scheme because PMD type values are
negative, each PMD has it's own types numeration and element types and
their sizes are not visible at RTE level. To resolve these
limitations the patch proposes this solution:
1. PMD can expose elements of pointer size only. RTE flow
conversion functions will use pointer size for each configuration
object in private PMD element it processes;
2. RTE flow verification will not reject elements with negative type.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch implements the change proposes in RFC [1], adding dedicated
fields to ETH and VLAN items structs, to clearly define the required
characteristic of a packet, and enable precise match criteria.
Documentation is updated accordingly.
[1] https://mails.dpdk.org/archives/dev/2020-August/177536.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Every hairpin queue pair should be configured properly and the
connection between Tx and Rx queues should be established, before
hairpin function works. In single port hairpin mode, the queues of
each pair belong to the same device. It is easy to get the hardware
and software information of each queue and configure the hairpin
connection with such information. In two ports hairpin mode, it is
not easy or inappropriate to access one queue's information from
another device.
Since hairpin is configured per queue pair, three new APIs are
introduced and they are internal for the PMD using.
The peer update API helps to pass one queue's information to the
peer queue and get the peer's information back for the next step.
The peer bind API configures the current queue with the peer's
information. For each hairpin queue pair, this API may need to be
called twice to configure the Tx, Rx queues separately.
The peer unbind API resets the current queue configuration and state
to disconnect it from the peer queue. Also, it may need to be called
twice to disconnect Tx, Rx queues from each other.
Some parameter of the above APIs might not be mandatory, and it
depends on the PMD implementation.
The structure of `rte_hairpin_peer_info` is only a declaration and
the actual members will be defined in each PMD when being used.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
After hairpin queues are configured, in general, the application will
maintain the ports topology and even the queues configuration for
the hairpin. But sometimes it will not.
If there is no hot-plug, it is easy to bind and unbind hairpin among
all the ports. The application can just connect or disconnect the
hairpin egress ports to/from all the probed ingress ports. Then all
the connections could be handled properly.
But with hot-plug / hot-unplug, one port could be probed and removed
dynamically. With two ports hairpin, all the connections from and to
this port should be handled after start(bind) or before stop(unbind).
It is necessary to know the hairpin topology with this port.
This function will return the ports list with the actual peer ports
number after configuration. Either peer Rx or Tx ports will be
gotten with this function call.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
To support two ports hairpin mode and keep the backward compatibility
for the application, two new attribute members of the hairpin queue
configuration structure will be added.
`tx_explicit` means if the application itself will insert the Tx part
flow rules. If not set, PMD will insert the rules implicitly.
`manual_bind` means if the hairpin Tx queue and peer Rx queue will be
bound automatically during the device start stage.
Different Tx and Rx queue pairs could have different values, but it
is highly recommended that all paired queues between one egress and
its peer ingress ports have the same values, in order not to bring
any chaos to the system. The actual support of these attribute
parameters will be checked and decided by the PMD drivers.
In the single port hairpin, if both are zero without any setting, the
behavior will remain the same as before. It means that no bind API
needs to be called and no Tx flow rules need to be inserted manually
by the application.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In single port hairpin mode, all the hairpin Tx and Rx queues belong
to the same device. After the queues are set up properly, there is
no other dependency between the Tx queue and its Rx peer queue. The
binding process that connected the Tx and Rx queues together from
hardware level will be done automatically during the device start
procedure. Everything required is configured and initialized already
for the binding process.
But in two ports hairpin mode, there will be some cross-dependences
between two different ports. Usually, the ports will be initialized
serially by the main thread but not in parallel. The earlier port
will not be able to enable the bind if the following peer port is
not yet configured with HW resources. What's more, if one port is
detached / attached dynamically, it would introduce more trouble
for the hairpin binding.
To overcome these, new APIs for binding and unbinding are added.
During startup, only the hairpin Tx and Rx peer queues will be set
up. Nothing will be done when starting the device if the queues are
without auto-bind attribute. Only after the required ports pair
started, the `rte_eth_hairpin_bind()` API can be called to bind the
all Tx queues of the egress port to the Rx queues of the peer port.
Then the connection between the egress and ingress ports pair will
be established.
The `rte_eth_hairpin_unbind()` API could be used to disconnect the
egress and the peer ingress ports. This should only be called before
the device is closed if needed. When doing the clean up, all the
egress and ingress pairs related to a single port should be taken
into consideration, especially in the hot unplug case.
mode is described.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When async unregister function is invoked in certain vhost event
callbacks (e.g. vring state change), deadlock may occur due to
recursive spinlock acquire. This patch uses trylock() primitive in
the unregister API to avoid deadlock.
Fixes: 78639d5456 ("vhost: introduce async enqueue registration API")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add check on the async vector buffer usage to prevent the buf overrun.
If the unused vector buffer is not sufficient to prepare for next
packet's iov creation, an async transfer will be triggered immediately
to free the vector buffer.
Fixes: 78639d5456 ("vhost: introduce async enqueue registration API")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Allocate async internal memory buffer by rte_malloc(), replacing array
declaration inside vq structure. Dynamic allocation can help to save
memory footprint when async path is not registered.
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Current async ops allows check_completed_copies() callback to return
arbitrary number of async iov segments finished from backend async
devices. This design creates complexity for vhost to handle breaking
transfer of a single packet (i.e. transfer completes in the middle
of a async descriptor) and prevents application callbacks from
leveraging hardware capability to offload the work. Thus, this patch
enforces the check_completed_copies() callback to return the number
of async memory descriptors, which is aligned with async transfer
data ops callbacks. vhost async data path are revised to work with
new ops define, which provides a clean and simplified processing.
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Applications handling fragmented IPv6 packets need to match on IPv6
fragment extension header, in order to identify the fragments order
and location in the packet.
This patch introduces the IPv6 fragment extension header item,
proposed in [1].
Relevant definitions are moved from lib/librte_ip_frag/rte_ip_frag.h
to lib/librte_net/rte_ip.h, as they are needed for IPv6 header handling.
struct ipv6_extension_fragment renamed to rte_ipv6_fragment_ext to
adapt it to the common naming convention.
Default mask is not defined, since all fields are optional.
[1] http://mails.dpdk.org/archives/dev/2020-March/160255.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using the current implementation of DPDK, an application cannot match on
IPv6 packets, based on the existing extension headers, in a simple way.
Field 'Next Header' in IPv6 header indicates type of the first extension
header only. Following extension headers can't be identified by
inspecting the IPv6 header.
As a result, the existence or absence of specific extension headers
can't be used for packet matching.
For example, fragmented IPv6 packets contain a dedicated extension header
(which is implemented in a later patch of this series).
Non-fragmented packets don't contain the fragment extension header.
For an application to match on non-fragmented IPv6 packets, the current
implementation doesn't provide a suitable solution.
Matching on the Next Header field is not sufficient, since additional
extension headers might be present in the same packet.
To match on fragmented IPv6 packets, the same difficulty exists.
This patch implements the update as detailed in RFC [1].
A set of additional values will be added to IPv6 header struct.
These values will indicate the existence of every defined extension
header type, providing simple means for identification of existing
extensions in the packet header.
Continuing the above example, fragmented packets can be identified using
the specific value indicating existence of fragment extension header.
To match on non-fragmented IPv6 packets, need to use has_frag_ext 0.
To match on fragmented IPv6 packets, need to use has_frag_ext 1.
To match on any IPv6 packets, the has_frag_ext field should
not be specified for match.
[1] https://mails.dpdk.org/archives/dev/2020-August/177257.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Call back functions are registered on the control plane. They
are accessed from the data plane. Hence, correct memory orderings
should be used to avoid race conditions.
Fixes: 4dc294158c ("ethdev: support optional Rx and Tx callbacks")
Fixes: c8231c63dd ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
While registering the call back functions full write barrier
can be replaced with one-way write barrier.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce extension of flow action API enabling sharing of single
rte_flow_action in multiple flows. The API intended for PMDs, where
multiple HW offloaded flows can reuse the same HW essence/object
representing flow action and modification of such an essence/object
affects all the rules using it.
Motivation and example
===
Adding or removing one or more queues to RSS used by multiple flow rules
imposes per rule toll for current DPDK flow API; the scenario requires
for each flow sharing cloned RSS action:
- call `rte_flow_destroy()`
- call `rte_flow_create()` with modified RSS action
API for sharing action and its in-place update benefits:
- reduce the overhead of multiple RSS flow rules reconfiguration
- optimize resource utilization by sharing action across multiple
flows
Change description
===
Shared action
===
In order to represent flow action shared by multiple flows new action
type RTE_FLOW_ACTION_TYPE_SHARED is introduced (see `enum
rte_flow_action_type`).
Actually the introduced API decouples action from any specific flow and
enables sharing of single action by its handle across multiple flows.
Shared action create/use/destroy
===
Shared action may be reused by some or none flow rules at any given
moment, i.e. shared action resides outside of the context of any flow.
Shared action represent HW resources/objects used for action offloading
implementation.
API for shared action create (see `rte_flow_shared_action_create()`):
- should allocate HW resources and make related initializations required
for shared action implementation.
- make necessary preparations to maintain shared access to
the action resources, configuration and state.
API for shared action destroy (see `rte_flow_shared_action_destroy()`)
should release HW resources and make related cleanups required for shared
action implementation.
In order to share some flow action reuse the handle of type
`struct rte_flow_shared_action` returned by
rte_flow_shared_action_create() as a `conf` field of
`struct rte_flow_action` (see "example" section).
If some shared action not used by any flow rule all resources allocated
by the shared action can be released by rte_flow_shared_action_destroy()
(see "example" section). The shared action handle passed as argument to
destroy API should not be used any further i.e. result of the usage is
undefined.
Shared action re-configuration
===
Shared action behavior defined by its configuration can be updated via
rte_flow_shared_action_update() (see "example" section). The shared
action update operation modifies HW related resources/objects allocated
on the action creation. The number of operations performed by the update
operation should not depend on the number of flows sharing the related
action. On return of shared action update API action behavior should be
according to updated configuration for all flows sharing the action.
Shared action query
===
Provide separate API to query shared action state (see
rte_flow_shared_action_update()). Taking a counter as an example: query
returns value aggregating all counter increments across all flow rules
sharing the counter. This API doesn't query shared action configuration
since it is controlled by rte_flow_shared_action_create() and
rte_flow_shared_action_update() APIs and no supposed to change by other
means.
example
===
struct rte_flow_action actions[2];
struct rte_flow_shared_action_conf conf;
struct rte_flow_action action;
/* skipped: initialize conf and action */
struct rte_flow_shared_action *handle =
rte_flow_shared_action_create(port_id, &conf, &action, &error);
actions[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
actions[0].conf = handle;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;
/* skipped: init attr0 & pattern0 args */
struct rte_flow *flow0 = rte_flow_create(port_id, &attr0, pattern0,
actions, error);
/* create more rules reusing shared action */
struct rte_flow *flow1 = rte_flow_create(port_id, &attr1, pattern1,
actions, error);
/* skipped: for flows 2 till N */
struct rte_flow *flowN = rte_flow_create(port_id, &attrN, patternN,
actions, error);
/* update shared action */
struct rte_flow_action updated_action;
/*
* skipped: initialize updated_action according to desired action
* configuration change
*/
rte_flow_shared_action_update(port_id, handle, &updated_action, error);
/*
* from now on all flows 1 till N will act according to configuration of
* updated_action
*/
/* skipped: destroy all flows 1 till N */
rte_flow_shared_action_destroy(port_id, handle, error);
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds checking whether the related Tx or Rx queue has been
setup in the queue-related API functions to avoid illegal address
access.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch extract checking rx_queue_id or tx_queue_id into two separate
common functions named eth_dev_validate_rx_queue and
eth_dev_validate_tx_queue.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Existing API supports AGE action to monitor the aging of a flow.
This patch implements RFC [1], introducing the response format for query
of an AGE action.
Application will be able to query the AGE action state.
The response will be returned in the format implemented here.
[1] https://mails.dpdk.org/archives/dev/2020-September/180061.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When using full offload, all traffic will be handled by the HW, and
forwarded to the requested VF or wire and the control application does
not see this traffic anymore. So there's a need for an action that
enables the control application some forwarded traffic visibility.
The solution introduces a new action that will sample the incoming
traffic and send a duplicated traffic with the specified ratio to the
application, while the original packet will continue to the target
destination.
The packets sampled equals is '1/ratio', the ratio value set to 1
means that the packets will be completely mirrored. The sample packet
can be assigned with different set of actions from the original packet.
In order to support the sample packet in rte_flow, new rte_flow action
definition RTE_FLOW_ACTION_TYPE_SAMPLE and structure rte_flow_action_sample
will be introduced.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As described in doc/guides/prog_guide/poll_mode_drv.rst,
the naming scheme for the xstats is parts separated with underscore:
* direction
* detail 1
* detail 2
* detail n
* unit
where detail 1 can be "q" followed with a queue number.
It means the name of the stats per queue should be rx_qN_* or tx_qN_*.
The second underscore was missing so far.
Fixing the basic xstat names may be considered an API change,
that's why it should not be backported.
While fixing this mistake, some examples of the naming scheme
are given as part of the API documentation of rte_eth_xstat_name.
More proposals about standardizing statistics:
http://fast.dpdk.org/events/slides/DPDK-2019-09-Ethernet_Statistics.pdf
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This small optimization uses the static the Virtio-net
header len in packed datapath, since Virtio-net header
cannot be the legacy one in case of packed ring.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
In case packed ring layout has been negotiated, but neither
Version 1 nor mergeable buffers, the Virtio-net header len
is assigned to the legacy devices value, which is wrong.
This patch fixes this with using the proper len as devices
using packed ring are not legacy devices.
Fixes: a922401f35 ("vhost: add Rx support for packed ring")
Fixes: ae999ce49d ("vhost: add Tx support for packed ring")
Cc: stable@dpdk.org
Reported-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
In virtio_dev_extbuf_alloc(), the shinfo structure used to store
the reference counter and the free callback of the external buffer
is by default stored inside the mbuf data.
This is wrong because the mbuf (and its data) can be freed before
the external buffer, for instance in the following situation:
pkt2 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_attach(pkt2, pkt);
rte_pktmbuf_free(pkt);
After this, pkt is freed, but it still contains shinfo, which is
referenced by pkt2.
Fix this by always storing the shinfo beside the external buffer.
Fixes: c3ff0ac70a ("vhost: improve performance by supporting large buffer")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the feature negotiation for vhost crypto during
initialization. The patch uses the newly created driver start
function to inform the driver type with the fixed vhost features.
In addition the patch provides a new API specifically used by
the application to start a vhost-crypto driver.
Fixes: 939066d965 ("vhost/crypto: add public function implementation")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When testing on some x86 platforms, code compiled with meson was observed
running at a different power-license level to that compiled with make. This
is due to the fact that meson auto-detects the instruction sets available
on the system and enabled AVX512 rte_memcpy when AVX512 was available,
while on make, a build time AVX-512 flag needed to be explicitly set to
enable that AVX512 rte_memcpy code path.
In the absence of runtime path selection for rte_memcpy - which is
complicated by it being a static inline function in a header file - we can
fix this behaviour regression by similarly having a build-time option which
must be set to enable the AVX-512 memcpy path.
Fixes: a25a650be5 ("build: add infrastructure for meson and ninja builds")
Fixes: 3e1bb55fd6 ("build/x86: add SSE flags")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
rte_cldemote is similar to a prefetch hint - in reverse.
On x86, cldemote(addr) enables software to hint to hardware that line is
likely to be shared. This is quite useful in core-to-core communications
where cache-line is likely to be shared.
ARM and PPC implementation is provided with NOP and can be added if any
equivalent instructions could be used for implementation on those
architectures.
Signed-off-by: Omkar Maslekar <omkar.maslekar@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The incriminated commit forgot to clean the Windows export file.
Fixes: 3cd73a1a1c ("eal: simplify exit functions")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add new internal wrapper function for use by pci drivers as a
.probe function to attach to an event interface. Same as
rte_event_pmd_pci_probe, except the caller can specify the name.
Updated rte_event_pmd_pci_probe so as to not duplicate
code.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In rte_event_crypto_adapter_create_ext() allocated memory for
adapter, we should free it when error happens, otherwise it
will lead to memory leak.
Fixes: 7901eac340 ("eventdev: add crypto adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The function rte_zmalloc() could return NULL, the return value
need to be checked.
Fixes: a3bbf2e097 ("eventdev: add eth Tx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
The telemetry library is connected with eventdev xstats and
port link info. The following new telemetry commands are added:
/eventdev/dev_list
/eventdev/port_list,DevID
/eventdev/queue_list,DevID
/eventdev/dev_xstats,DevID
/eventdev/port_xstats,DevID,PortID
/eventdev/queue_xstats,DevID,PortID
/eventdev/queue_links,DevID,PortID
queue_links command displays a list of queues linked with a specified
eventdev port and a service priority associated with each link.
Signed-off-by: Mike Ximing Chen <mike.ximing.chen@intel.com>
Reviewed-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Currently, the rte_flow functions are not defined as thread safe.
DPDK applications either call the functions in single thread or
protect any concurrent calling for the rte_flow operations using
a lock.
For PMDs support the flow operations thread safe natively, the
redundant protection in application hurts the performance of the
rte_flow operation functions.
And the restriction of thread safe is not guaranteed for the
rte_flow functions also limits the applications' expectation.
This feature is going to change the rte_flow functions to be thread
safe. As different PMDs have different flow operations, some may
support thread safe already and others may not. For PMDs don't
support flow thread safe operation, a new lock is defined in ethdev
in order to protects thread unsafe PMDs from rte_flow level.
A new RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE device flag is added to
determine whether the PMD supports thread safe flow operation or not.
For PMDs support thread safe flow operations, set the
RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE flag, rte_flow level functions will
skip the thread safe helper lock for these PMDs. Again the rte_flow
level thread safe lock only works when PMD operation functions are
not thread safe.
For the PMDs which don't want the default mutex lock, just set the
flag in the PMD, and add the prefer type of lock in the PMD. Then
the default mutex lock is easily replaced by the PMD level lock.
The change has no effect on the current DPDK applications. No change
is required for the current DPDK applications. For the standard posix
pthread_mutex, if no lock contention with the added rte_flow level
mutex, the mutex only does the atomic increasing in
pthread_mutex_lock() and decreasing in
pthread_mutex_unlock(). No futex() syscall will be involved.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add pthread mutex lock as it is needed for the thread safe rte_flow
functions.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Tested-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Clarify the documentation of QinQ flags, and extend the meaning of the
flag: if PKT_RX_QINQ_STRIPPED is set and PKT_RX_VLAN_STRIPPED is unset,
only the outer VLAN is removed from packet data, but both tci are saved
in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The SDAP is a protocol in the LTE stack on top of PDCP for
QOS. A particular PDCP session may or may not have
SDAP enabled. But if it is enabled, SDAP header should be
authenticated but not encrypted if both confidentiality and
integrity is enabled. Hence, the driver should be intimated
from the xform so that it skip the SDAP header while encryption.
A new field is added in the PDCP xform to specify SDAP is enabled.
The overall size of the xform is not changed, as hfn_ovrd is just
a flag and does not need uint32. Hence, it is converted to uint8_t
and a 16 bit reserved field is added for future.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch removes enumerators RTE_CRYPTO_CIPHER_LIST_END,
RTE_CRYPTO_AUTH_LIST_END, RTE_CRYPTO_AEAD_LIST_END to prevent
ABI breakage that may arise when adding new crypto algorithms.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds raw data-path APIs for enqueue and dequeue
operations to cryptodev. The APIs support flexible user-define
enqueue and dequeue behaviors.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates ``rte_crypto_sym_vec`` structure to add
support for both cpu_crypto synchronous operation and
asynchronous raw data-path APIs. The patch also includes
AESNI-MB and AESNI-GCM PMD changes, unit test changes and
documentation updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The rte_cryptodev_pmd_parse_input_args function crashes with a
segmentation fault when passing a non-empty argument string.
The function passes cryptodev_pmd_valid_params to rte_kvargs_parse,
which accepts a NULL-terminated list of valid keys, yet
cryptodev_pmd_valid_params does not end with NULL. The patch adds the
missing NULL pointer.
Fixes: 9e6edea418 ("cryptodev: add APIs to assist PMD initialisation")
Cc: stable@dpdk.org
Signed-off-by: Haggai Eran <haggaie@nvidia.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This reverts commit a0f0de06d4 as the
rte_cryptodev_info_get function versioning was a temporary solution
to maintain ABI compatibility for ChaCha20-Poly1305 and is not
needed in 20.11.
Fixes: a0f0de06d4 ("cryptodev: fix ABI compatibility for ChaCha20-Poly1305")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Reviewed-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since librte_ipsec was first introduced in 19.02 and there were no changes
in it's public API since 19.11, it should be considered mature enough to
remove the 'experimental' tag from it.
The RTE_SATP_LOG2_NUM enum is also being dropped from rte_ipsec_sa.h to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The option RTE_EAL_ALWAYS_PANIC_ON_ERROR was off by default,
and not customizable with meson. It is completely removed.
The function rte_dump_registers is a trace of the bare metal support
era, and was not supported in userland. It is completely removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This commit adds new rte_prefetchX_write() variants, that suggest to the
compiler to use a prefetch instruction with intention to write. As a
compiler builtin, the compiler can choose based on compilation target
what the best implementation for this instruction is.
Three versions are provided, targeting the different levels of cache.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The cited commit introduced functions with 'int memory_order' argument.
The C11 standard section 7.17.1.4 defines 'memory_order' as the
"enumerated type whose enumerators identify memory ordering constraints".
A compilation error occurs:
error: declaration of 'memory_order' shadows a global declaration
[-Werror=shadow]
rte_atomic_thread_fence(int memory_order)
This issue was hit when trying to compile OVS with gcc 4.8.5. This
compiler version does not provide stdatomic.h, so enum memory_order is
redefined in OVS code.
In another case, if the compiler does provide stdatomic.h header,
passing -Wsystem-headers in the CFLAGS will also cause that failure.
Fix it by changing the argument name 'memory_order' to 'memorder'.
Fixes: 672a150563 ("eal: add wrapper for C11 atomic thread fence")
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Asaf Penso <asafp@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
gcc 5.4 fails with:
../lib/librte_acl/acl_run_avx512x8.h: In function 'match_process_avx512x8':
../lib/librte_acl/acl_run_avx512x8.h:382:31: error:
pointer targets in passing argument 1 of '_mm256_mask_i32scatter_epi32'
differ in signedness [-Werror=pointer-sign]
Later gcc versions work fine, as for them parameter type was
changed to 'void *'.
Fixed by applying explicit cast for offending argument.
Bugzilla ID: 556
Fixes: b64c2295f7 ("acl: add 256-bit AVX512 classify method")
Fixes: 45da22e42e ("acl: add 512-bit AVX512 classify method")
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Only marking the doxygen declarations is not enough.
Arch specific implementations must be tagged as well since there is no
common declaration of those inlines.
Fixes: 8a00dfc738 ("eal: add write combining store")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
