Reorg within Intel teams causing transfer of maintainership
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Due to position change, cannot be a full time maintainer anymore.
The git tree dpdk-next-net-mlx will be managed by Raslan,
as approved by the DPDK Technical Board.
For mlx5 PMD, Slava is added as additional maintainer.
Will continue to be involved in the DPDK community in different ways.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Replace the mbuf pointer array in the event eth Rx adapter
callback with an event array. Using an event array allows
the application to change attributes of the events enqueued
by the SW adapter.
The callback can drop packets and populate a callback
argument with the number of dropped packets. Add a Rx adapter
stats field to keep track of the total number of dropped packets.
This commit removes the experimental tags from
the callback and stats APIs, the experimental tag from eventdev
is also removed and eventdev functions become part of the
main DPDK API/ABI.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When promoting those symbols as stable, there is no check to ensure that
the final result is consistent.
Add a little script to get the symbols per section from the library map
files.
Validate that all experimental symbols in object files are referenced by
library map files.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This commit replaces rte_rand()'s use of lrand48() with a DPDK-native
combined Linear Feedback Shift Register (LFSR) (also known as
Tausworthe) pseudo-random number generator.
This generator is faster and produces better-quality random numbers
than the linear congruential generator (LCG) of lib's lrand48(). The
implementation, as opposed to lrand48(), is multi-thread safe in
regards to concurrent rte_rand() calls from different lcore threads.
A LCG is still used, but only to seed the five per-lcore LFSR
sequences.
In addition, this patch also addresses the issue of the legacy
implementation only producing 62 bits of pseudo randomness, while the
API requires all 64 bits to be random.
This pseudo-random number generator is not cryptographically secure -
just like lrand48().
Bugzilla ID: 114
Bugzilla ID: 276
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Claim the maintainership of the sub tree dpdk-next-net-mrvl,
which covers all the Marvell network PMDs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Xiaolong Ye will replace Beilei Xing as co-maintainer of
dpdk-next-net-intel.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
A script used with meson was missing in the list of files.
Fixes: 4c773788e0 ("build: generate Windows exports file")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Alan is no longer involved in PMDs maintenance hence
update the list.
Also append new active maintainer to the list.
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
IPC is a big part of secondary process infrastructure now,
and I have been de-facto maintainer for it since 18.05.
Update MAINTAINERS file to match.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reference to test/Makefile was forgotten when removing this file.
Reference to app/test/test_rcu* was forgotten when adding the files.
Fixes: a9de470cc7 ("test: move to app directory")
Fixes: b87089b0bb ("test/rcu: add API and functional tests")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add the experimental tag back to the Rx event adapter callback,
the Rx event callback register and the Rx event adapter statistics
retrieval functions due to an API change to be proposed in a
future patch.
This patch also adds the experimental tag to these
function definitions and adds the functions to the EXPERIMENTAL
section of the map file, these were missing previously.
Fixes: 80bdf91dc8 ("eventdev: promote adapter functions as stable")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
stack_autotest performs positive and negative testing of the stack API, and
exercises the push and pop datapath functions with all available lcores.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The new rte_stack library is derived from the mempool handler, so this
commit removes duplicated code and simplifies the handler by migrating it
to this new API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Updated lib/meson.build to create shared libraries on Windows.
Added DEF files to list the exports for the eal and kvargs libraries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Added initial stub source files and required meson changes
for Windows support.
kernel/windows/meson is a stub file added to support
Windows specific source in future releases.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Succeed Chao Zhu as maintainer of EAL for IBM POWER.
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add myself as co-maintainer for the timer library.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Robert Sanford <rsanford@akamai.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add test cases for ticket lock, recursive ticket lock,
and ticket lock performance.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The spinlock implementation is unfair, some threads may take locks
aggressively while leaving the other threads starving for long time.
This patch introduces ticketlock which gives each waiting thread a
ticket and they can take the lock one by one. First come, first serviced.
This avoids starvation for too long time and is more predictable.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
GitHub is a service used by developers to store repositories. GitHub
provides service integrations that allow 3rd party services to access
developer repositories and perform actions. One of these services is
Travis-CI, a simple continuous integration platform.
This series introduces the ability for any github mirrors of the DPDK
project, including developer mirrors, to kick off builds under the
travis CI infrastructure. For now, this just means compilation - no
other kinds of automated run exists yet. In the future, this can be
expanded to execute and report results for any test-suites that might
exist.
This is a simple initial implementation of a travis build for the DPDK
project. It doesn't require any changes from individual developers to
enable, but will allow those developers who opt-in to GitHub and the
travis service to get automatic builds for every push they make.
The files added under .ci/ exist so that in the future, other CI
support platforms (such as cirrus, appveyor, etc.) could have a common
place to put their requisite scripts without polluting the main tree.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "bsdapp" is a legacy one, but just calling the subdirectory
"freebsd" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After today I will no longer be with Intel, so I am
removing my name from all related maintainer roles.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The bpf folder didn't actual contain a test application, but instead
basic examples of BPF code for use with testpmd. Therefore we can
move it to the `examples` folder. Being different, it also needs
a README with it, explaining what it is and how to use it. References
to the code from the testpmd docs are suitably updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move to "app" directory and enable with meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
