Add EFX_OPTS_EF10() which may be used as synonym of any EF10-based
NIC (i.e. Huntigton, Medford or Medford2 at the time of addition).
Suggested-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead requires Rx buffer size to be specified in INIT_RXQ.
If the parameter is not supported (e.g. on EF10 family adapters),
zero must be used on INIT_RXQ.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Supports the firmware update mechanism described in SF-121352-AN.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The recently added NO_CONT_EV mode is recommended for when looking for
maximum throughput on 100G links as it allows the firmware to operate
more efficiently. The biggest benefit is when using scatter and jumbo
frames, but it is also necessary to achieve line rate in other cases.
Support for NO_CONT_EV when scatter is disabled is simple - the main
datapath change is to always read the packet length from the prefix,
not the event. This requires storing a flag with the event queue so
the event handler knows NO_CONT_EV mode is in use.
Supporting NO_CONT_EV with scatter would require an API change.
(Now the ee_flags field in efx_evq_t is used on the datapath, move it
next to other fields which are also read on the datapath to try to avoid
reading an additional cache line.)
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The macros are deprecated and are not used anymore, so they can
be deleted.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Symbols for maximum and minimum number of Tx, Rx and event descriptors
are deprecated. They are not used anymore, so they can be deleted.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use of the macro for calculating a Rx queue size is deprecated. Replace
it with a call to a function that uses descriptor size specified for
every NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use of the macro for calculating a Rx queue size is deprecated. Replace
it with a call to a function that uses descriptor size specified for
every NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use of the macro for calculating a Tx queue size is deprecated. Replace
it with a call to a function that uses descriptor size specified for
every NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions efx_*q_nbufs return the number of a queue buffers by dividing
the queue size by page size. If minimum size of a queue is smaller than
one page, we still need the page and number of buffers should not be 0.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
For consistency with the size of Tx descriptors, the size of event
descriptors should be a part of NIC config, not a macro that is
common for all NIC families. Also, add a max number of EvQ buffers
define which is needed to initialize an MCDI buffer at compile time.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
For consistency with the size of Tx descriptors, the size of Rx
descriptors should be a part of NIC config, not a macro that is
common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Size of Tx descriptor is different on Riverhead. So, the size
should be a part of NIC config, not a macro that is common for
all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The change is needed for the functions that accept const efx_nic_t
pointer and have to get efx_nic_cfg_t.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The define EFX_TXQ_MAX_BUFS is used only by EF10 family implementation.
Since the macro is not used by any drivers, it does not require
exposed libefx interface.
Make the define EF10-specific.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The macro EFX_RXQ_DC_NDESCS() is used only by Siena implementation.
Since the macro is not used by any drivers, it does not require
exposed libefx interface.
Make the macro Siena-specific.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be
made common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be
made common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be made
common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Min limit is not common for all NIC families. Use the variable from
NIC configuration instead of deprecated define.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min/max limits. So, these limits should
be a part of NIC config, not defines common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min/max limits. So, these limits should
be a part of NIC config, not defines common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
For consistency with defines of min descriptor number, define max
descriptor number for Huntington, Medford and Medford2.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min limit. So, this limit should
be a part of NIC config, not define common for all NIC families.
Define maximum Tx descriptor number for Siena in the same way as
minimum for consistency.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
FreeBSD driver needs a patch to provide a means for packets
which do not need checksum offload but have flow ID set
to avoid hitting only the first Tx queue (which has been used
for packets not needing checksum offload).
This should be possible on Huntington, Medford or Medford2 chips
since these support toggling checksum offload on any given queue
dynamically by means of pushing option descriptors.
The patch for FreeBSD driver will then need a means to figure out
whether the feature can be used, and testing adapter family might
not be a good solution.
This patch adds a feature bit specifically to indicate support
for checksum option descriptors. The new feature bits may have
more users in future, apart from the mentioned FreeBSD patch.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If an event handler requested an abort, only the inner loop was
guaranteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Correct annotations where NULL input can be permitted
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS get requests are supported in secondary process.
Prepare to make sfc_adapter primary process private data.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Logging should be supported in secondary process and now we have
everything required to share at least main logging macro.
sfc_adapter is going to become primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
sfc_adapter structure will become primary process only private data.
Start to factor out shared data into dedicated structure which will
become separate structure finally.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS RETA query and hash configuration get functions use shared
adapter data only. No libefx functions are called.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Tx datapath supports multi-process, secondary process should be
able to use Tx descriptor status API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
