If datapath supports multi-process, it should be possible to get
its TxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Secondary process needs to know TxQ state.
TxQ control structure will become primary process private.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Rx datapath supports multi-process, secondary process should be
able to use Rx descriptor status and related API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If datapath supports multi-process, it should be possible to get
its RxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Secondary process needs to know RxQ state.
RxQ control structure will become primary process private.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The change is required to support datapath-dependent device operations
for secondary process. It is just a step in the direction.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx and Tx datapath ops should be stored in process private
data since these structures are located in the data section
(not allocated from shared memory).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These wrappers are used in single place and just complicate reading
and understanding if these ops could be supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
TxQ control structure contains primary process only data and will become
primary process only. TxQ info get is supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RxQ control structure contains primary process only data and will
become primary process only. RxQ info get is supported in secondary
process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Dynamic log type value may differ in different processes.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx queue count may be used from data core and it should not
generate control path logs.
Fixes: 04aa6b9c5f ("net/sfc: get RxQ pending descriptors count")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
test_create_bonded_device is failing due to improper initialisation in
bonded device configuration. Which leads to crash while setting up
queues.
The value of nb_rx_desc is checked if it is not in range of rx_desc_lim
of bonded device which fails.
This is due to "rx_desc_lim" is set to 0 as default value of bonded
device during bond_alloc().
Hence nb_rx_desc (1024) is > 0 and test fails.
Fix is to set the default values of rx_desc_lim of bonded device to
appropriate value.
Receive the values from slaves configuration like done for other
existing slave configuration
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Added <rte_cycles.h> inclusion, was not included on some
building setups (armv8).
Fixes: 71ab2d6472 ("net/mlx5: fix VXLAN port registration race condition")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When operation calls for auth (digest generation), followed by
encryption of both data plus digest, the digest-in-buffer
flag must be set for QAT.
Fixes: 39e0bee48e ("crypto/qat: rework request builder for performance")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
The rte_errno shouldn't have assigned negative error codes, so it has
to be fixed.
Fixes: b3fc5a1ae1 ("net/ena: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The check for proc type in eth_ena_dev_init() should appear before
modyfing adapter structure.
Calling memset on ena_adapter from secondary process context, was
erasing all structure information, and it was causing the crash of the
main process.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The number of queues was limited by number of lcores in the recent ENAv2
patch. However, some apps like symmetric_mp, are configuring multiple
queues although there is only single lcore used.
To prevent failure in that case, the lcore number constraint was
removed.
Fixes: ea93d37eb4 ("net/ena: add HW queues depth setup")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
There is an intention to support VXLAN tunnel match without
hardware offloaded decapsulation, just to redirect ingress
tunnelled frame untouched. This small fix allows to specify
Flows with VXLAN VNI pattern and with or without following
decapsulation action.
Fixes: 251e8d02cf ("net/mlx5: add VXLAN to flow translate routine")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Log port ID as 16-bit unsigned integer.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071 ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
E-Switch VXLAN tunneling rules require virtual VXLAN network
devices be created. These devices are managed by MLX5 PMD and
created/deleted dynamically.
Kernel creates the VXLAN devices and registers VXLAN UDP ports
to be hardware offloaded within the NIC kernel drivers. The
registration process is being performed into context of working
kernel thread and the race conditions might happen.
The VXLAN device is created and success code is returned to calling
application, but the UDP port registration process is not completed
yet and the next applied rule might be rejected by the driver with
ENOSUP code. This patch adds some timeout for new created devices,
allowing port registration process to be completed. The waiting
is performed once after device been created and first rule is being
applied.
Fixes: 95a464cecc ("net/mlx5: add E-switch VXLAN tunnel devices management")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When tc rule is created via Netlink message application
can provide the unique rule value which can be accepted
by the kernel. Than rule is managed with this assigned
handle. It was found that kernel can reject the proposed
handle and assign its own handle value, the rule control
is lost, because application uses its initially prorosed
rule handle and knows nothing about handle been repleced.
The kernel can assign handle automatically, the application
can get the assigned handle value by specifying NLM_F_ECHO
flag in Netlink message when rule is being created. The
kernel sends back the full descriptor of rule and handle
can be retrieved from and stored by application for further
rule management.
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch modifies function mlx5_flow_validate_action_rss(), to
prevent the setting of rule with rss action, but without specifying
any queues.
For example:
flow create 0 ingress pattern end actions rss queues end / end
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
During port start, function mlx5_ctrl_flow_vlan() is called to create
default ingress flow rules.
For specific use-cases, a port can be used for Tx only.
In such case, number of Rx queues can be set to 0 to save resources,
hence the default ingress rules are irrelevant.
This patch modifies function mlx5_ctrl_flow_vlan() to avoid the
creation of the default ingress rules when number of Rx queues is 0.
It also includes update of validation functions for relevant actions,
mlx5_flow_validate_action_queue() and mlx5_flow_validate_action_rss(),
to prevent creation of flow rules with these actions when number of Rx
queues is 0.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When updating used ring, the id in used element should be the
index of the first desc in the desc chain.
Fixes: f9b9d1a557 ("net/virtio-user: add multiple queues in device emulation")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Always use the virtio variants which support the platform
memory ordering.
Fixes: 9230ab8d79 ("net/virtio: support platform memory ordering")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixed below issues in the packed ring based control
vq support in virtio user:
1. The idx_hdr should be used_idx instead of the id in the desc;
2. We just need to write out a single used descriptor for each
descriptor list;
3. The avail/used bits should be initialized to 0;
Meanwhile, make the function name consistent with other parts.
Fixes: 48a4464029 ("net/virtio-user: support control VQ for packed")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch mainly fixed below issues in the packed ring based
control vq support in virtio driver:
1. When parsing the used descriptors, we have to track the
number of descs that we need to skip;
2. vq->vq_free_cnt was decreased twice for a same desc;
Meanwhile, make the function name consistent with other parts.
Fixes: ec194c2f18 ("net/virtio: support packed queue in send command")
Fixes: a4270ea4ff ("net/virtio: check head desc with correct wrap counter")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 6bc985e411 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix the issue that the link speed is unknown.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: cf911d90e3 ("net/ice: support link update")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The original commit enabled the creation of flow rule with empty
ETH address and with specific VLAN.
It works fine on PF, but such flow rule is still rejected on VF due
to kernel limitation, which blocks MAC address of all zeroes.
This patch complements the original commit.
It sets byte 0 of MAC address to 0xFF.
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
DCB is not necessary to be configured if no user priority of
queue region is requested.
Unexpected configuration of DCB will cause unexpected behavior, like
FDIR does not work on those queues, but could cause more issues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes the inflexible compile issue AESNI-MB PMD.
Originally the compile of the PMD will fail if IPSec_MB is
not installed in default location.
Fixes: c68d7aa354 ("crypto/aesni_mb: use architecture independent macros")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Incorrect placement of prefetch in Tx path is causing
a performance drop of around ~2% on AMD platform.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Allocating replacement buffer per received packet is expensive.
Instead, process received packets first and allocate
replacement buffers in bulk later.
This improves performance by ~25% in terms of PPS on AMD
platforms.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
When ifpga_rawdev_create() allocate memory for a new rawdev,
the original code allocate redundant memory for adapter,
which is a member of the rawdev. What is actually necessary is
the adapter to be initialized, not memory allocated.
Fixes: ef1e8ede3d ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
In the original code, when an AFU device probe a driver,
if the first driver in the driver list does not support
this device or some error happens, bus probe returns an error.
With this patch, a device will try to match driver in the driver
list one by one until an appropriate driver is found.
If some error happens, the error is returned. If the current driver
does not support the device, just try the next driver in the list.
If all the drivers in the list are tried and no driver matches,
0 is returned. Otherwise, the error code is returned.
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Original driver requires users to input "afu_bts" args.
But driver can also work without an explicit "afu_bts" args.
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
This patch removes an unnecessary flag which was breaking the
build with older versions of the ISA-L library (v2.23 and older)
and replace with a more appropriate flag which is present
in older versions of library.
Fixes: bd03d3f1e4 ("compress/isal: enable checksum support")
Signed-off-by: Lee Daly <lee.daly@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Errors, missed and pauses should not be included in delivered
good Rx packets reported by ipackets.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Free flow profile entries when free HW tables.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the module that implemented flow abstraction that base on
flexible pipeline.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The flexible pipeline module provide the infrastructure for ice's
flexible packet processing feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added API ice_alloc_hw_res and ice_free_hw_res.
Added resource type macro.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove some unnecessary code.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rx and Tx datapath references were mixed up in a couple
of log statements and commentary blocks in the original
commit. Correct datapath name references in said places.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
VADAPTER_RX_OVERFLOW means Rx statistics overflow, not a missed
packet because of overflow.
VADAPTER_RX_BAD_PACKETS accumulates a number of error conditions,
but mainly impossibility to deliver because of no descriptors
available, so it is better to classify it as imissed.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In rdma-core library IBV_WQ_FLAG_RX_END_PADDING is renamed to
IBV_WQ_FLAGS_PCI_WRITE_END_PADDING. Way to query the capability is also
changed.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx packet padding is supposed to be set by an environment variable -
MLX5_PMD_ENABLE_PADDING, but it has been missing for some time by mistake.
Rather than using such a variable, a PMD parameter (rxq_pkt_pad_en) is
added instead.
Fixes: a1366b1a2b ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Before this patch, VF must request a specific queues(1/2/4/8/16) with
DPDK PF. This patch align the number of requested queues to next power
of 2. So VF can request any number queues from 1 to 16.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e_aq_set_rss_lut should set register according
to the vsi->type. if not, VF may overwrite the rigister
of PF.
Note, only X722 is impacted, since flag I40E_FLAG_RSS_AQ_CAPABLE
is only enabled on X722.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On replenishing Rx buffers for vectorized Rx, mbuf->buf_addr isn't needed
to be accessed as it is static and easily calculated from the mbuf address.
Accessing the mbuf content causes unnecessary load stall and it is worsened
on ARM.
Fixes: 545b884b1d ("net/mlx5: fix buffer address posting in SSE Rx")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used
Fixes: 828d51d8fc ("bus/fslmc: refactor scan and probe functions")
Fixes: c22fab9a6c ("raw/dpaa2_qdma: support configuration APIs")
Fixes: e5cbdfc537 ("crypto/dpaa2_sec: add basic operations")
Fixes: b23d4e898a ("crypto/dpaa2_sec: add per dev mempool to store FLE")
Fixes: 623326dded ("crypto/dpaa2_sec: introduce poll mode driver")
Fixes: e7a45f3cc2 ("crypto/caam_jr: add UIO specific operations")
Fixes: f44bccadd8 ("crypto/caam_jr: add device basic operations")
Fixes: 7e3e2954e0 ("crypto/dpaa_sec: move mempool allocation to config")
Fixes: c3e85bdcc6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The Netronome's Network Flow Processor chip is highly programmable
with the goal of processing packets at high speed. Processing units
and other chip components are available from the host through the
PCIe CPP(Command Push Pull bus) interface. The NFP PF PMD configures
a CPP handler for setting up and working with vNICs, perform actions
like link up or down, or accessing extended stats from the MAC component.
There exist NFP host tools which access the NFP components for
programming and debugging but they require the CPP interface. When the
PMD is bound to the PF, the DPDK app owns the CPP interface, so these
host tools can not access the NFP through other means like NFP kernel
drivers.
This patch adds a CPP bridge using the rte_service API which can be
enabled by a DPDK app. Interestingly, DPDK clients like OVS will not
enable specific service cores, but this can be performed with a
secondary process specifically enabling this CPP bridge service and
therefore giving access to the NFP to those host tools.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
libgen.h is not used, so do not include it.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
This patch adds the type-of-service and time-to-live IP header
fields validation on E-Switch, both for match pattern and
VXLAN encapsulation action IP header itesm. The E-Switch flows
will use the common mlx5_flow_validate_item_ipv4/6 routines
with added extra parameter, specifying the supported fields
mask.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds the type-of-service and time-to-live IP header
fields support on E-Switch. There match pattern for both fields
with masking is added. Also these fields can be set for VXLAN
tunnel encapsulation header.
This issue is critical for some Open VSwitch configuration
on overlayed (tunneled) networks, where the tos field can be
inherited from outer header to inner header.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch is a preparation for adding the type-of-service and
time-to-live IP header fields support on E-Switch. There are
two types of keys added - one for match pattern, other for
tunnel encapsulation header.
This issue is critical for some Open VSwitch configuration
on overlayed (tunneled) networks, where the tos field can be
inherited from outer header to inner header.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
RH7.2 with kernel 3.10.0-327 does not support VXLAN
devices metadata and IFLA_VXLAN_COLLECT_METADATA
key is neither defined nor supported. We must specify
VNI parameter, which will be actually ignored by kernel,
applied rules will be processed by mlx5 kernel driver
and the actual VNI from rules will be used.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Current design uses the VXLAN virtual devices attached
to outer network interface for decapsulation. Kernel
allows to use non-attached devices, so now we can create
not attached device and use it both for encapsulation
and decapsulation. Devices management becomes simpler,
less VXLAN devices are created and used.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The VXLAN encapsulation neigh/local rules will use
the new introduced structure, which keeps the
rules lists, related to specified outer interface,
instead of attached VTEP structure. It allows us to
unbind VTEP structure from keeping the rules for
interface.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Currently the VXLAN encapsulation neigh/local rules
are stored in the list contained in the VTEP device
structure. Encapsulation VTEP device is attached to
outer interface and stored rules are related to this
underlying interface. We are going to use unattached
VXLAN devices for encapsulation (kernel does not use
attached interface to find egress one), so we should
introduce the structure to keep interface related
neigh/local rules instead of VTEP structure. This
patch introduces internal tcf_irule structure, and
its create/delete methods.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch removes unnecessary local varialbles and optimizes
local and neigh encapsulation rules search.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch add support for inner and outer ethernet types for the
E-Switch Flows with tunnels. Inner and outer ethernet type match
can be specified with ethernet items, vlan items, or implicitly
deduced from IP address items. The tcm_info field in Netlink message
tcm structure is filled always with outer protocol.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch updates the validation routine for the E-Switch Flows.
The ethernet type field can be specified within inner and outer
tunnel ethernet items, by vlan item or implicitly deduced from
IP address items. The validation routine checks all these items
and their combinations for mutual compatibility issues and possible
conflicts.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch updates the translation routine for the E-Switch Flows.
Inner tunnel pattern items are translated into Netlink message,
support for tunnel inner IP addresses (v4 or v6), IP protocol,
and TCP and UDP ports is added.
We are going to support Flows matching with outer tunnel items
and not containing the explicit tunnel decap action (this one
might be drop, redirect or table jump, for exapmle).
So we can not rely on presence of tunnel decap action in the
list to decide whether the Flow is for tunnel, instead we will
use the presence of tunnel item. Item translation is rebound
to presence of tunnel items, instead of relying on decap action.
There is no way to tell kernel driver the outer address type
(IPv4 or IPv6) but specify the address flower key. The outer
address key is put on Netlink with zero mask if there is no
RTE item is specified in the list.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch updates the validation routine for the E-Switch Flows.
The inner/outer item flags are added and set correctly, the
validation routine will accept and check the inner items
which follow the tunnel item (like VNI).
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch removes unnecessary outer tunnel parameters check in the
validation routine for the E-Switch Flows. IPv4/IPv6 may have any
spec and mask, and transferred to tc without changes, all checks
are performed by kernel.
We are going to support Flows matching with outer tunnel items
and not containing the explicit tunnel decap action (this one
might be drop, redirect or table jump, for exapmle). So we can
not rely on presence of tunnel decap action in the list to decide
whether the Flow is for tunnel, instead we will use the presence
of tunnel item (like RTE_FLOW_ITEM_TYPE_VXLAN) in the item list.
The tunnel pattern checks within Flow validation routine are
rebound to presence of tunnel item. VXLAN decap action checks
for presence of VXLAN VNI item.
The tunnel UDP item is checked at the point of processing the tunnel
item (i.e. VXLAN). We can not perform UDP item check as tunnel once
UDP item encountered in the list, because it is not known yet whether
the tunnel item follows. The pointer to UDP item is saved and
checked as outer ones if tunnel item found.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Do the VF message basic validation such as OPCODE message length check,
some special OPCODE message format check, to protect the i40e PMD from
malicious VF message attack.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixed Tx error and allowed untagged packets in
when vlan filter on.
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Printing pointer in log is uninformative (unless in a debugger),
instead print the assigned kernel device name which correlates
well with what TAP is doing.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having a global variable which is set to "TUN" or "TAP" during
probe is a potential bug if probing is ever done in different
processes or contexts. Let's fix it now by using existing enum
that has type of connection.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
Assigning tun and tap index in DPDK tap device driver is racy
and fails if used with primary/secondary. Instead use the kernel
feature of device wildcarding where if a name with %d is used
the kernel will fill in the next available device.
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Cc: stable@dpdk.org
Reported-by: Haifeng Li <hfli@netitest.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
Any messages that normally occur during probe should be at DEBUG
level (not NOTICE). This reduces overall log clutter.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
If interface name is passed to remote or iface then check
the length and for invalid characters. This avoids problems where
name gets truncated or rejected by kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
The code for set_interface_name was incorrectly assuming that
space for null byte was necessary with snprintf/strlcpy.
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
snprintf is not needed here, use strlcpy instead.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by Keith Wiles <keith.wiles@intel.com>
ISP2() macro function misspelled in a check just before it.
Fixes: e1b9445985 ("net/sfc: build libefx")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Previously FSLMC bus only supported blacklisting of DPNI (eth),
DPSECI (crypto) devices. With this patch, devices like DPIO,
DPMCP, and other DP* can also be blacklisted/whitelisted.
This is a required condition for secondary processes where the
secondary needs to be passed a mutually exclusive list of
resources as compared the primary and all other secondaries.
This patch also moves the DPIO memory from malloc to hugepage so
that in future in case the DPIO list can be shared, it can be
accessed in secondaries.
Once this patch is done, multi-process cases can be executed by
whitelisting/blacklisting devices in each instance.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The I/O threads for DPAA2 take their reference for bpool ID, the
port ID and other info like qdid, from the rte_eth_dev. Further,
to get this data during I/O operation, a reference of the RTE
device is kept in the queue structure (dpaa2_queue).
In case of secondary processes, rte_eth_dev is not same as the
primary process. Thus, the reference goes invalid.
This patch changes the implementation to use the dev_private
rather than the rte_eth_dev as that is shared area across
all the processes.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The DPAA2 hw can support a special offset based
configuration to program distribution on hash.
This is for all cases, which are not directly supported.
e.g. HASH based distribution on inner ip header
of a GRE tunnel.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch introduces an rte pmd API to configure dpdmux from
the application.
dpdmux can work in association with dpni as an additional
distribution capability on the NIC.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support in bus and vfio to scan dpdmux type of objects
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
dpdmux object is added as a part of net driver as it is used to
de-multiplex packets to separate interfaces on basis of specific rules.
These rules can be configured from the software
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is to align with the latest qbman hw library
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
