Add new admin queue function and extended fields for cloud filter:
- Add admin queue function for Replace filter command (Opcode: 0x025F)
- Define big buffer for extended general fields in Add/Remove
Cloud filters command
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds:
- ENCAP offload negotiation flag. Use the existing ENCAP_CSUM offload
flag to negotiate GSO_UDP_TUNNEL_CSUM capability and create new ENCAP
flag for negotiating offloads for encapsulated packets
- RX_ENCAP_CSUM offload negotiation flag for VF to negotiate RX
checksum capability for tunnelled packet types.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When sending an adminq command, we wait for the command to complete in
a loop. This loop waits for an entire millisecond, when in practice the
adminq command is processed often much faster.
Change the loop to use i40e_usec_delay instead, and wait for 50 usecs
each time instead. This appears to be about the minimum time required,
based on some manual observation and testing.
The primary benefit of this change is reducing latency of various
operations in the PF driver, especially when related to having a large
number of VFs enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This is fix for klocwork issue where dcbcfg->numapps could
be greater than size of array (i.e dcbcfg->app[I40E_DCBX_MAX_APPS]).
The fix makes sure the array is not accessed past size of array
(i.e. I40E_DCBX_MAX_APPS).
Fixes: 166dceeeeafc ("i40e/base: add parsing for CEE DCBX TLVs")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The X722 doesn't support the AQ command to read/write the control
register so enable it to bypass the check and use the direct read/write
method.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
On X722, we can control whether or not the hardware performs ATR
eviction. Define the correct bit so we can twiddle it.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When setting up the VSIs, MAC filter is used for
receiving MAC broadcast packets.
We should follow it to implement the broadcast
promiscuous mode setting.
Fixes: 61fff9b4c68b ("net/i40e: set VF broadcast mode from PF")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
It's not queue identifier but a descriptor identifier.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
enable DCB on SRIOV VFs, including
- UP and TC mapping according to dcb_tc in struct rte_eth_dcb_rx_conf.
- TC and queue mapping: queues are divided equally for each TC.
- UP insert when sending packet according to the TC the Tx queue
belongs to.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During PF initialization, PF will generate an initial mac address
for VFs, the purpose is to help VF keep a constant mac address between
its startup/shutdown cycles. Now this is not necessary, since we already
provide an API to set VF's MAC address from PF side
(rte_pmd_i40e_set_vf_mac_addr).
Application can use this API to lock down VF's mac address.(of course this
should happen before VF init)
While without this patch, we still can use rte_pmd_i40e_set_vf_mac_addr
to overwrite the random one, but this patch align DPDK's default behavior
with Kernel PF driver's, and this help to give an identical experience
when work with kernel VF driver.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables i40e driver in PowerPC along with its altivec
intrinsic support.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Fix the compile error when RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC
is disabled.
Also fake_mbuf is required to be initialized and assigned to
additional sw_ring entries for vector PMD independent from
RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC config option.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Testpmd failed to start in another hugetlbfs mount point on
i40e, the root cause is that hash table is always allocated
on socket 0.
Issue can be reproduced by forcing testpmd to allocate memory
only from node 1:
testpmd --socket-mem=0,8192 -- -i --socket-num=1
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
PMD: eth_i40e_dev_init(): FW 4.40 API 1.4 NVM 04.05.03 eetrack 80001cd8
RING: Cannot reserve memory
HASH: memory allocation failed
PMD: i40e_init_ethtype_filter_list(): Failed to create ethertype hash
table!
EAL: Error - exiting with code: 1
Cause: Requested device 0000:81:00.0 cannot be used
Fix the issue by assigning socket id during hash parameter definition.
Fixes: 5c53c82c8174 ("net/i40e: store flow director filter")
Fixes: 425c3325f0b0 ("net/i40e: store tunnel filter")
Fixes: 078259773da9 ("net/i40e: store ethertype filter")
Cc: stable@dpdk.org
Reported-by: Ivan Nardi <nardi.ivan@gmail.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
When setting up the VEB, default TC bitmap is used.
But after setting the default TC bitmap, it's not stored. So when we're
trying to get the enabled TCs on the VEB, it's always wrong.
Fixes: 5135f3ca49a7 ("i40e: enable DCB in VMDQ VSIs")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The range of TC bandwidth is 0 ~ 800, it's 16bits not 8bits.
Fixes: c8b9a3e3fe1b ("i40e: support DCB mode")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
PKT_TX_TUNNEL_MASK and PKT_TX_IEEE1588_TMST are missed in bitmask
of all supported packet Tx flags by i40e. It will cause packet preparing
fail when sending tunnel packets with Tx offload.
This patch fixes it.
Fixes: 3f33e643e5c6 ("net/i40e: add Tx preparation")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix the redundant delay in function link update. There is no need to
call rte_delay_ms and hold CPU for 100ms when link status is up.
Fixes: 263333bbb7a9 ("i40e: fix link status timeout")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Missed packets on RX were erroneously being assigned to the ierrors
struct member. Change it to be assigned to imissed.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Tom Crugnale <tcrugnale@sandvine.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The GL_SWR_PRI_JOIN_MAP registers are effective on filters, changing
the register's default value will fail the ethertype filter.
The GL_SWR_PRI_JOIN_MAP values are different for each NIC, and current
X722 register values are wrong.
Fix X722 ethertype filter by setting registers to X722 default NVM
values.
Fixes: 92fbf2cbdff4 ("i40e: support X722 and its A0 hardware")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c00c ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Creating IPv4 flow and IPv6 flow will cause conflict error.
Root cause is there's no IP info included in tunnel filter
input.
Fixes: 425c3325f0b0 ("net/i40e: store tunnel filter")
Fixes: d416530e6358 ("net/i40e: parse tunnel filter")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
VNI of VXLAN is parsed wrongly. The root cause is that
array VNI in item VXLAN uses network byte ordering.
Fixes: d416530e6358 ("net/i40e: parse tunnel filter")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Fixes: a541407fe4bc ("net/i40e: set VF MAC anti-spoofing from PF")
Fixes: 4cbc41efcbb2 ("net/i40e: set VF VLAN anti-spoofing from PF")
Fixes: c0ec14757c5f ("net/i40e: set VF unicast promiscuous mode from PF")
Fixes: ae57070ca8b7 ("net/i40e: set VF multicast promiscuous mode from PF")
Fixes: 83bb95e3fefc ("net/i40e: set VF VLAN insertion from PF")
Fixes: 61fff9b4c68b ("net/i40e: set VF broadcast mode from PF")
Fixes: c33abbc1440e ("net/i40e: set VF VLAN tag from PF")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the order of releasing the VSI's.
Release the VMDq VSI's first, then release the main VSI.
Fixes: 3cb446b4aeb2 ("i40e: free vmdq vsi when closing")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When no error reported in Rx descriptor, we should set
CKSUM_GOOD flag before return.
Fixes: 9966a00a0688 ("net/i40e: enable bad checksum flags in vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
filter_type is not set when removing all macvlan filters. It will
cause error when send AQ command to HW.
This patch fixes this issue.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When VF sends request to remove MAC address, PF host will check
if it is a non-zero or unicast address. When VF remove a multicast
address, it will report error.
This patch fixes this issue.
Fixes: ec852c94af39 ("net/i40e: enhance sanity check of MAC")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When no error reported in Rx descriptor, we should set CKSUM_GOOD flag
before return.
Fixes: b704f9071b09 ("net/i40e: implement new Rx checksum flag")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
i40e PF host only support to work with DPDK VF driver, Linux
VF driver is not supported. This change will enhance in
configuring IRQ link list.
This Change will identify VF client by number of vector
requested. DPDK VF will ask only single one while Linux VF
will request at least 2. It will have different configuration
for different clients. DPDK VF will be configured to link all
queue together, while Linux VF will be configured per request.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
When VF requested to configure TX queue, a few parameters are
missed to be configured in PF host. This change have more
fields parsed and configured for TX context.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
PF host didn't return correct VSI id to VF.
This change fix it.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
i40e PF host only support to work with DPDK VF driver, Linux
VF driver is not supported. This change will enhance in version
number returned.
Current version info returned won't be able to be recognized
by Linux VF driver, change to values that both DPDK VF and Linux
driver can recognize.
The expense is original DPDK host specific feature like
CFG_VLAN_PVID and CONFIG_VSI_QUEUES_EXT will not available.
DPDK VF also can't identify host driver by version number returned.
It always assume talking with Linux PF.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This patch add support to get/clear VF statistics
from PF side.
Two APIs are added:
rte_pmd_i40e_get_vf_stats.
rte_pmd_i40e_reset_vf_stats.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
When VF sends request to add a new MAC address, PF host
will check if it's a non-zero or unicast address, or it
will return with error. In fact, VF still can set multicast
address. This change remove to check if it's a unicast
address.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
add rte_pmd_i40e_set_vf_vlan_filter API.
User can call the API on PF to enable/disable
a set of VF's VLAN filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add rte_pmd_i40e_set_vf_vlan_tag API.
User can call the API on PF to enable/disable a specific
VF's VLAN tag.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF broadcast mode from PF.
User can call the API on PF to enable/disable a specific
VF's broadcast mode.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support inserting VF VLAN id from PF.
User can call the API on PF to insert a VLAN id to a
specific VF.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add a function to configure vlan strip enable/disable for specific
SRIOV VF device.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
