The logic to read vf_id used by ACQUIRE/TEARDOWN_Q/RELEASE TLVs,
multiplexed return value to convey vf_id value and status of read vf_id
API. This lets to segfault at dev_start() as resources are not properly
cleaned and re-allocated.
Fix read vf_id API to differentiate between vf_id value and return
status. Adjust the status checking accordingly.
Added bnx2x_vf_teardown_queue() API and moved relevant code from
bnx2x_vf_unload() to new API.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add new ack interrupt API to avoid using
VFIO_IRQ_SET_ACTION_TRIGGER(rte_intr_enable()) for
acking interrupt purpose for VFIO based interrupt handlers.
This implementation is specific to Linux.
Using rte_intr_enable() for acking interrupt has below issues
* Time consuming to do for every interrupt received as it will
free_irq() followed by request_irq() and all other initializations
* A race condition because of a window between free_irq() and
request_irq() with packet reception still on and device still
enabled and would throw warning messages like below.
[158764.159833] do_IRQ: 9.34 No irq handler for vector
In this patch, rte_intr_ack() is a no-op for VFIO_MSIX/VFIO_MSI interrupts
as they are edge triggered and kernel would not mask the interrupt before
delivering the event to userspace and we don't need to ack.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This reverts commit 89aac60e0b.
"vfio: fix interrupts race condition"
The above mentioned commit moves the interrupt's eventfd setup
to probe time but only enables one interrupt for all types of
interrupt handles i.e VFIO_MSI, VFIO_LEGACY, VFIO_MSIX, UIO.
It works fine with default case but breaks below cases specifically
for MSIX based interrupt handles.
* Applications like l3fwd-power that request rxq interrupts
while ethdev setup.
* Drivers that need > 1 MSIx interrupts to be configured for
functionality to work.
VFIO PCI for MSIx expects all the possible vectors to be setup up
when using VFIO_IRQ_SET_ACTION_TRIGGER so that they can be
allocated from kernel pci subsystem. Only way to increase the number
of vectors later is first free all by using VFIO_IRQ_SET_DATA_NONE
with action trigger and then enable new vector count.
Above commit changes the behavior of rte_intr_[enable|disable] to
only mask and unmask unlike earlier behavior and thereby
breaking above two scenarios.
Fixes: 89aac60e0b ("vfio: fix interrupts race condition")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The eth_dev_info was used with content that was obsolete. Added update
of struct content prior to use.
Fixes: 6b7780bfeb ("examples/ip_frag: fix use of ethdev internal device array")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added telemetry to EAL long options so that when
--telemetry is passed as an EAL arg that there is
no unrecognized argument error message printed.
Fixes: 8877ac688b ("telemetry: introduce infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Tested-by: John OLoughlin <john.oloughlin@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
When bus layer reports the preferred mode as RTE_IOVA_DC then
select the RTE_IOVA_VA mode:
- All drivers work in RTE_IOVA_VA mode, irrespective of physical
address availability.
- By default, a mempool asks for IOVA-contiguous memory using
RTE_MEMZONE_IOVA_CONTIG. This is slow in RTE_IOVA_PA mode and it
may affect the application boot time.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This reverts commit 0cb86518db.
The PCI bus now reports DC when faced with a device bound to an unknown
driver and, in such a case, the IOVA mode is selected against physical
address availability.
As a consequence, there is no reason for this special case for Mellanox
drivers.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
fslmc_vfio.c:387:36: note: format string is defined here
DPAA2_BUS_DEBUG("VFIO dmamap 0x%llx:0x%llx, size 0x%llx\n",
format ‘%llx’ expects argument of type ‘long long unsigned int’
argument 6 has type ‘__u64 {aka long unsigned int}’
Fixes: 2b5fa25708 ("mempool/dpaa2: map external memory with VFIO")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa2 devices.
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa devices.
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove unused macros from the library, and update release
notes.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Update ip pipeline sample app for configuration flexiblity of
pipe traffic classes and queues.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
update unit tests for configuration flexibility of pipe traffic
classes and queues size.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Update softnic tm function for configuration flexiblity of pipe
traffic classes and queues size.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Change the traffic class 3 related params name to best-effort(be)
traffic class.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Allow setting the maximum number of pipe profiles in run time.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Add support for zero queue sizes of the traffic classes. The queues
which are not used can be set to zero size. This helps in reducing
memory footprint of the hierarchical scheduler.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
When building dpdk with different kernel headers by specifying
RTE_KERNELDIR igb_uio is compiled to directory with a name of the
version of kernel thats running on the system instead of the one that
dpdk is actually compiled against. Fixed by replacing hardcoded value
with value from RTE_KERNELDIR.
Fixes: 3967af352a ("mk: install kernel modules")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The session init shall return failure if the internal
session create fails for any reasons.
Fixes: 13273250ee ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add the support to handle the failure in session
create for wireless related cases. Else it will cause
segment fault due to I/O on un-initialized sessions.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove workaround in tun_aesgcm_defs.sh and trs_aesgcm_defs.sh
to get around the bug where the first inbound packet is dropped
for inline crypto.
Fixes: 9297844520 ("examples/ipsec-secgw: add scripts for functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline crypto installs a flow rule in the NIC. This flow
rule must be installed before the first inbound packet is
received.
The create_session() function installs the flow rule,
create_session() has been refactored into create_inline_session()
and create_lookaside_session(). The create_inline_session() function
uses the socket_ctx data and is now called at initialisation in
sa_add_rules().
The max_session_size() function has been added to calculate memory
requirements.
The cryprodev_init() function has been refactored to drop calls to
rte_mempool_create() and to drop calculation of memory requirements.
The main() function has been refactored to call max_session_size() and
to call session_pool_init() and session_priv_pool_init() earlier.
The ports are started now before adding a flow rule in main().
The sa_init(), sp4_init(), sp6_init() and rt_init() functions are
now called after the ports have been started.
The rte_ipsec_session_prepare() function is called in fill_ipsec_session()
for inline which is called from the ipsec_sa_init() function.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
BT0 block type padding after rfc2313 has been discontinued.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Asymmetric nature of RSA algorithm suggest to use
additional field for output. In place operations
still can be done by setting cipher and message pointers
with the same memory address.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
RSA modulus cannot be prime as its security depends on the problem
of integer factorization.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch updates the constant names and function names used
in code snippets in the Compression Device Library documentation.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds checking if device support ZUC
algorithms before running ZUC test cases.
It also removes unnecessary checks of digest
appended space and fixes some comments wording.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes fail status returned from compression PMD
in case destination buffer size is not enough to store
all data.
Fixes: 3dc9ef2d23 ("compress/qat: fix returned status on overflow")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Use ERR rather than INFO to warn that it's a negative test else
the errors are seen but the warning to expect them isn't.
Also add comment to make it easier to follow code.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Resolution for seg-faults observed:
1) in buffer re-alignment in-place sgl case
2) case where data end is exactly at end of an sgl segment.
Also renamed variable and increased comments for clearer code.
Fixes: 40002f6c2a ("crypto/qat: extend support for digest-encrypted auth-cipher")
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Damian Nowak <damianx.nowak@intel.com>
This patch add parameter --mtu parse key and enumeration value.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch changes the key pointer data types in cipher, auth,
and aead xforms from "uint8_t *" to "const uint8_t *" for a
more intuitive and safe sessionn creation.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Liron Himi <lironh@marvell.com>
This patch fixes some minor problems like 'magic numbers',
spelling mistakes, enumes naming.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a possibility to force controlled process termination
as a result of two signals: SIGTERM and SIGINT
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a benchmark part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Also updates release notes.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a verification part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds --ptest option to make possible to choose
test case from command line.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds template functions for multi-cores performance
version of compress-perf-tool
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Compiler could generate non-atomic stores for whole table entry
updating. This may cause incorrect nexthop to be returned, if
the byte with valid flag is updated prior to the byte with nexthop
is updated.
Besides, field by field updating of table entries follow
read-modify-write sequences. The operations are not atomic,
nor efficient. And could cause entries out of synchronization.
Changed to use atomic store to update whole table entry.
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Suggested-by: Gavin Hu <gavin.hu@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
When a tbl8 group is getting attached to a tbl24 entry, lookup
might fail even though the entry is configured in the table.
For ex: consider a LPM table configured with 10.10.10.1/24.
When a new entry 10.10.10.32/28 is being added, a new tbl8
group is allocated and tbl24 entry is changed to point to
the tbl8 group. If the tbl24 entry is written without the tbl8
group entries updated, a lookup on 10.10.10.9 will return
failure.
Correct memory orderings are required to ensure that the
store to tbl24 does not happen before the stores to tbl8 group
entries complete.
Besides, explicit structure alignment is used to address atomic
operation building issue with older version clang.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
