In order to check the congestion state of Egress FQs,
this qbman function will be used by the DPAA2 Ethernet PMD.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Typically when the PMD issues a Rx command to DPAA2 hardware,
the HW writes the available descriptors into the given memory.
The RX function then processes the frames and prepare them as
mbufs.
This patch adds support to issue another pull request to hardware
in another memory location, before we start processing the output
of the first request. This help in controlling the CPU cycles
wasted during the wait for the hardware to write the descriptors.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 hardware support the option to configure
multiple memories for Rx recv buffer (DPAA2-DQRR).
Each Rx request executing is called as 'DQ' request.
This patch adds routines to get information w.r.t each DQ request.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DPAA2 driver is not using the DPAA2 frame descriptor
software annotation area. This patch reduces the
PTA length to zero and adjust the RX Buffer Layout
accordingly.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This code in device init is not required, as the buffer
layout setting is also being programmed during queue configuration.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 devices now support cortex-a72. They no longer support a57.
Also fp and simd is no more required to be stated explicitly for
standard a72 core.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add subsystem device id of CN23xx cards and expose speed capability of
devices. Update liquidio feature file to mark support.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Before this patch, flex_filter->index was always zero when it was read
and used after rte_zmalloc. The corresponding code was therefore moved
into the add and delete parts of the if/else statement.
Fixes: 231d43909a ("igb: migrate flex filter to new API")
Cc: stable@dpdk.org
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
i210/i211 also support flex filters. Tested on i210.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Completion buffer size was computed wrongly, causing
completion polling to wraparound too early and miss entries.
Fixing it by using Direct Verbs to query the CQ info.
Fixes: 6218063b39 ("net/mlx5: refactor Rx data path")
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
On error, we also need to zero the bytes transmitted.
Fixes: f4ff17a465 ("net/af_packet: guard against buffer overruns in Tx path")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Required to be able to use logging in the secondary process
where Ethernet device pointer stored in sfc_adapter is invalid.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Update enic NIC guide, release notes and add flow API to the
supported features list.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Added a debug function to print enic filters and actions when
rte_validate_flow is called. Compiled in CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW
is enabled and log level is INFO.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
5-tuple exact Flow support for 1200 series adapters. This allows:
Attributes: ingress
Items: ipv4, ipv6, udp, tcp (must exactly match src/dst IP
addresses and ports and all must be specified).
Actions: queue and void
Selectors: 'is'
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode disabled via the UCS management interface. This allows:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
With advanced filters disabled, an IPv4 or IPv6 item must be specified
in the pattern.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
For VICs with filter tagging, support the MARK and FLAG actions
by setting appropriate mbuf ol_flags if there is a filter match.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Flow support for 1300 series adapters with the 'Advanced Filter'
mode enabled via the UCS management interface. This enables:
Attributes: ingress
Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
ipv6, udp, tcp.
Actions: queue, and void
Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Stub callbacks for the generic flow API and a new FLOW debug define.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Update the base functions for the Cisco VIC. These files are mostly
common with other VIC drivers so are left alone is as much as possible.
Includes in a new filter/action interface which is needed for Generic
Flow API PMD support. Update FDIR code to use the new interface.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Unfortunately the datasheet has a mistake. The
address of the TX error counter is wrong.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
i210 and i211 also support unicast MAC filters.
The patch was tested on i210 based hw, for i211
support was looked up in the specs.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, the FDIR programming time is +11ms on i40e.
This patch will result in an average programming time of
22usec with a max of 60usec .
Signed-off-by: Michael Lilja <ml@napatech.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Coverity issue: 144512
Coverity issue: 144513
Fixes: 9c7188a68d ("net/ark: provide API for hardware modules pktchkr and pktgen")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Check for the current MAC address on both the remote and the tap
netdevices before setting a new value.
While there, remove wrong empty lines and ensure tap_ioctl() return
value is negative, just like what is done throughout this code.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
This has three main benefits:
- tun_alloc is now generic again for any queue,
- mtu no longer needs to be handled in tap_setup_queue(),
- an actual netdevice is created as soon as the device is probed.
On top of it, code in eth_dev_tap_create() has been reworked to have a
more logical behavior; initialization can now fail if a remote is
requested but cannot be set up.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Print a detailed debug message inside tap_ioctl() directly. The caller
now only needs to check for return value.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Support for a fixed MAC address for testing with the last octet
incrementing by one for each interface defined with the new 'mac=fixed'
string on the --vdev option. The default option is still to randomize
the MAC address for each tap interface.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
