CONFIG_RTE_BUILD_SHARED_LIB and CONFIG_RTE_BUILD_COMBINE_LIBS does not
have quotes in their values (only y or n). That's why the variables
RTE_BUILD_SHARED_LIB and RTE_BUILD_COMBINE_LIBS are always identical to
their CONFIG_ counterpart, and are useless.
In order to have consistent naming of config options in the makefiles,
these options are removed and the "CONFIG_ prefixed" variables are used.
Fixes: e25e4d7ef1 ("mk: shared libraries")
Fixes: 4d3d79e7a5 ("mk: combined library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Added code that saves the pointers to the detached devices, during
driver loading, and during driver unloading, go over the list,
and re-attach them by calling device_probe_and_attach
on each device.
Signed-off-by: Raz Amir <razamir22@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch removes CONFIG_RTE_LIBRTE_EAL_HOTPLUG option, and enables it
as default in both Linux and BSD.
Also, to support port hotplug, rte_eal_pci_scan() and below missing
symbols should be exported to ethdev library.
- rte_eal_parse_devargs_str()
- rte_eal_pci_close_one()
- rte_eal_pci_probe_one()
- rte_eal_pci_scan()
- rte_eal_vdev_init()
- rte_eal_vdev_uninit()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch consolidates below functions, and implements these in common
eal code.
- rte_eal_pci_probe_one_driver()
- rte_eal_pci_close_one_driver()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: David Marchand <david.marchand@6wind.com>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_resource()
- pci_unmap_resource()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch consolidates below structures, and defines them in common code.
- struct pci_map
- struct mapped_pci_resources
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds a new function called pci_uio_map_resource_by_index().
The function hides how to map uio resource in linuxapp and bsdapp.
With the function, pci_uio_map_resource() will be more abstracted.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds new functions called pci_uio_alloc_resource() and
pci_uio_free_resource().
The functions hides how to prepare or free uio resource in linuxapp
and bsdapp. With the function, pci_uio_map_resource() will be more
abstracted.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch fixes below.
- bsdapp
- Use map_id in pci_uio_map_resource().
- Fix interface of pci_map_resource().
- Move path variable of mapped_pci_resource structure to pci_map.
- linuxapp
- Remove redundant error message of linuxapp.
'pci_uio_map_resource()' is implemented in both linuxapp and bsdapp,
but interface is different. The patch fixes the function of bsdapp
to do same as linuxapp. After applying it, file descriptor should be
opened and closed out of pci_map_resource().
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
To merge pci code of linuxapp and bsdapp, this patch changes names
like below.
- uio_map to pci_map
- uio_resource to mapped_pci_resource
- uio_res_list to mapped_pci_res_list
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch fixes following memory leaks.
- When open() is failed, uio_res and fds won't be freed in
pci_uio_map_resource().
- When pci_map_resource() is failed but path is allocated correctly,
path and fds won't be freed in pci_uio_map_recource().
Also, some mapped resources should be freed.
- When pci_uio_unmap() is called, path should be freed.
Also, fixes below.
- When pci_map_resource() is failed, mapaddr will be MAP_FAILED.
In this case, pci_map_addr should not be incremented in
pci_uio_map_resource().
- To shrink code, move close().
- Remove fail variable.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
When pci_uio_unmap_resource() is called, a file descriptor that is used
for uio configuration should be closed.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch fixes coding style of below files in linuxapp and bsdapp.
- eal_pci.c
- eal_pci_uio.c
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_prefetchX functions included volatile void *p as parameter,
but the function does not modify it,
so it should include the const keyword.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch extends flow director commands to support l2_payload flow type.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends flow director to support l2_payload flow
type in i40e driver.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a new struct rte_eth_l2_flow to support
l2_payload flow type.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The outer vlan should be copied from source packet buffer to
support double vlan stripping and insertion, as double vlan can be
stripped or inserted by some of NIC hardware.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add checksum offload capability flags which have already been
supported for a long time.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Use the reserved 16 bits in rte_mbuf structure for the outer vlan,
also add QinQ offloading flags for both RX and TX sides.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Little endian to CPU order conversion had been added for reading
vlan tag from RX descriptor, while its original source line was
forgotten to delete. That's a discarded source line and should be
deleted.
Fixes: 23fcffe8ff ("ixgbe: fix id and hash with flow director")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function to clear the TX ring when a port was being closed, e.g. on
exit in testpmd, was not checking the mbuf refcnt before freeing it.
Since the function in the vector driver to clear the ring after TX does
not set the pointer to NULL post-free, this caused crashes if mbuf
debugging was turned on.
To reproduce the issue, ensure the follow config variables are set:
RTE_IXGBE_INC_VECTOR
RTE_LIBRTE_MBUF_DEBUG
Then compile up and run testpmd using 10G ports with the vector driver.
Start traffic and let some flow through, then type "stop" and "quit" at
the testpmd prompt, and crash will occur. Output below:
testpmd> quit
Stopping port 0...done
Stopping port 1...PANIC in rte_mbuf_sanity_check():
bad ref cnt
[New Thread 0x7fffabfff700 (LWP 145312)]
[New Thread 0x7fffb47fe700 (LWP 145311)]
[New Thread 0x7fffb4fff700 (LWP 145310)]
[New Thread 0x7ffff6cd5700 (LWP 145309)]
18: [/home/bruce/dpdk.org/x86_64-native-linuxapp-gcc/app/testpmd(_start+0x29)
<....snip for brevity...>
Program received signal SIGABRT, Aborted.
0x00007ffff7120a98 in raise () from /lib64/libc.so.6
A similar error occurs when clearing the RX ring, which is also fixed by
this patch.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As well as the fast-path functions in the rxtx code, there are also
functions which set up and tear down the descriptor rings. Since these
are not performance critical functions, there is no need to have them
extensively optimized, so we add __attribute__((cold)) to their
definitions. This has the side-effect of making debugging them easier as
the compiler does not optimize them as heavily, so more variables are
accessible by default in gdb.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for a minor Sphinx build warning in the ABI guidelines docs:
versioning.rst:126: WARNING: Bullet list ends without a
blank line; unexpected unindent.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
When a target is finished building, it reports just "Build complete".
When building multiple targets simultaneously, e.g.
make install T=x86_64-native-linuxapp-*
and one target fails, it's not always obvious which of the builds
failed. To help this, we add the actual target that is completed to the
"Build complete" message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The code pattern is repeated so many times, it is a good
idea to introduce template like other code here uses.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This fixes lots of complaints from checkpatch about whitespace
and other non-material things. Important to fix the old code now
befor more code does copy/paste of same junk.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_devices is in BSS, the address of rte_eth_devices
plus port_id can not ever be NULL for a valid port_id number.
Remove this unnecessary check and fix the code style.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Nature of the problem was not initialised buffer[256], there were probability
that operation system will provide previously used memory and on special condition
there were probability that string operations will work on random data that
could provide unexpected program behaviour.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Software implementation of the Toeplitz hash function used by RSS.
Can be used either for packet distribution on single queue NIC
or for simulating of RSS computation on specific NIC (for example
after GRE header decapsulating).
Signed-off-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_hash_hash is a public function but was not in
rte_hash_version.map
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When compiling the cxgbe driver with icc, multiple errors about using
enums as integers appear across a number of files, including in the base
code and in the DPDK-specific driver code.
.../drivers/net/cxgbe/cxgbe_main.c(386): error #188: enumerated type mixed
with another type
t4_get_port_type_description(pi->port_type));
^
For the errors in the base driver code we use the CFLAGS_BASE_DRIVER
approach used by other drivers to disable warnings.
For errors in the DPDK-specific code, typecasts are used to fix the
errors in the code itself.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
fm10k was failing to run in XEN domain0, as the physical
memory for DMA should be allocated and translated
in a different way for XEN domain0. So
rte_memzone_reserve_bounded() should be used for DMA
memory allocation, and rte_mem_phy2mch() should be used
for DMA memory address translation to support running
fm10k PMD in XEN domain0.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Multicast loopback must be disabled on PF devices to prevent the adapter
from sending frames back. Required with MOFED 3.0.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
RDs are a new feature of MOFED 3.0 that makes Verbs aware of how CQ and QP
resources are being used for internal performance tuning.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Depending on adapters features and VXLAN support in the kernel, VXLAN frames
can be automatically recognized, in which case checksum validation and
generation occurs on inner and outer L3 and L4.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
