Some files were left with full license and wrong copyright format.
They are switched to this format:
SPDX-License-Identifier: BSD-3-Clause
Copyright 2017 Mellanox Technologies, Ltd
Fixes: 5feecc57d9 ("align SPDX Mellanox copyrights")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We have many stable branches being maintained at the same time, and
sometimes it's not clear which branch a patch is being backported for.
Note in the guidelines that it should be specified via the cover letter,
annotation or using --subject-prefix.
Also note to send only to stable@dpdk.org, not dev@dpdk.org.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Added contribution guideline for adding stable
tags when sending patches all fix patches to the
master branch that are candidates for backporting
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Added contribution guideline for adding tags
when sending patches that have been raised by
coverity
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since we move to new offload APIs, IXGBE_SIMPLE_FLAGS is not used.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add force_link_up devargs to always force link as up for VFs.
This enables VFs on the same NIC to send traffic to each other
even when physical link is down.
Also add RTE_PMD_REGISTER_PARAM_STRING to export all supported
devargs.
Fixes: 011ebc236d ("net/cxgbe: add skeleton VF driver")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch corrects some spelling issues in i40e.rst and clarifies
which controllers and connections are part of the 700 Series.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Update information for blacklist and whitelist options for secondary
process to share same from primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Intel's libsso_zuc library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_snow3g library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_kasumi library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Some feature flags, such as RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER
are ambiguous. In this case, it is not clear if Scatter Gather lists
are supported in the input buffer and/or output buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_start/stop
are not really used in any of the crypto drivers
(they all just return 0 or -ENOTSUP).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_attach_sym_session
and rte_cryptodev_queue_pair_detach_sym_sessions
are not really used in any of the crypto drivers
(only one driver implements it and it just return 0).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Cryptodev info structure currently contains
a pointer to an rte_pci_device structure.
This field depends on a specific bus type (PCI),
which is not following a bus independent design.
Following the same approach taken in ethdev, the field
will be replaced with a pointer to an rte_device structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Since the API changes made in 17.08, the session mempool
is not created anymore in each crypto device.
Therefore, there is no need to have, in the cryptodev info
structure, the maximum number of sessions supported per device
and per queue pair.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Multi-Packet Rx Queue (MPRQ a.k.a Striding RQ) can further save PCIe
bandwidth by posting a single large buffer for multiple packets. Instead of
posting a buffer per a packet, one large buffer is posted in order to
receive multiple packets on the buffer. A MPRQ buffer consists of multiple
fixed-size strides and each stride receives one packet.
Rx packet is mem-copied to a user-provided mbuf if the size of Rx packet is
comparatively small, or PMD attaches the Rx packet to the mbuf by external
buffer attachment - rte_pktmbuf_attach_extbuf(). A mempool for external
buffers will be allocated and managed by PMD.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is the new design of Memory Region (MR) for mlx PMD, in order to:
- Accommodate the new memory hotplug model.
- Support non-contiguous Mempool.
There are multiple layers for MR search.
L0 is to look up the last-hit entry which is pointed by mr_ctrl->mru (Most
Recently Used). If L0 misses, L1 is to look up the address in a fixed-sized
array by linear search. L0/L1 is in an inline function -
mlx4_mr_lookup_cache().
If L1 misses, the bottom-half function is called to look up the address
from the bigger local cache of the queue. This is L2 - mlx4_mr_addr2mr_bh()
and it is not an inline function. Data structure for L2 is the Binary Tree.
If L2 misses, the search falls into the slowest path which takes locks in
order to access global device cache (priv->mr.cache) which is also a B-tree
and caches the original MR list (priv->mr.mr_list) of the device. Unless
the global cache is overflowed, it is all-inclusive of the MR list. This is
L3 - mlx4_mr_lookup_dev(). The size of the L3 cache table is limited and
can't be expanded on the fly due to deadlock. Refer to the comments in the
code for the details - mr_lookup_dev(). If L3 is overflowed, the list will
have to be searched directly bypassing the cache although it is slower.
If L3 misses, a new MR for the address should be created -
mlx4_mr_create(). When it creates a new MR, it tries to register adjacent
memsegs as much as possible which are virtually contiguous around the
address. This must take two locks - memory_hotplug_lock and
priv->mr.rwlock. Due to memory_hotplug_lock, there can't be any
allocation/free of memory inside.
In the free callback of the memory hotplug event, freed space is searched
from the MR list and corresponding bits are cleared from the bitmap of MRs.
This can fragment a MR and the MR will have multiple search entries in the
caches. Once there's a change by the event, the global cache must be
rebuilt and all the per-queue caches will be flushed as well. If memory is
frequently freed in run-time, that may cause jitter on dataplane processing
in the worst case by incurring MR cache flush and rebuild. But, it would be
the least probable scenario.
To guarantee the most optimal performance, it is highly recommended to use
an EAL option - '--socket-mem'. Then, the reserved memory will be pinned
and won't be freed dynamically. And it is also recommended to configure
per-lcore cache of Mempool. Even though there're many MRs for a device or
MRs are highly fragmented, the cache of Mempool will be much helpful to
reduce misses on per-queue caches anyway.
'--legacy-mem' is also supported.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This is the new design of Memory Region (MR) for mlx PMD, in order to:
- Accommodate the new memory hotplug model.
- Support non-contiguous Mempool.
There are multiple layers for MR search.
L0 is to look up the last-hit entry which is pointed by mr_ctrl->mru (Most
Recently Used). If L0 misses, L1 is to look up the address in a fixed-sized
array by linear search. L0/L1 is in an inline function -
mlx5_mr_lookup_cache().
If L1 misses, the bottom-half function is called to look up the address
from the bigger local cache of the queue. This is L2 - mlx5_mr_addr2mr_bh()
and it is not an inline function. Data structure for L2 is the Binary Tree.
If L2 misses, the search falls into the slowest path which takes locks in
order to access global device cache (priv->mr.cache) which is also a B-tree
and caches the original MR list (priv->mr.mr_list) of the device. Unless
the global cache is overflowed, it is all-inclusive of the MR list. This is
L3 - mlx5_mr_lookup_dev(). The size of the L3 cache table is limited and
can't be expanded on the fly due to deadlock. Refer to the comments in the
code for the details - mr_lookup_dev(). If L3 is overflowed, the list will
have to be searched directly bypassing the cache although it is slower.
If L3 misses, a new MR for the address should be created -
mlx5_mr_create(). When it creates a new MR, it tries to register adjacent
memsegs as much as possible which are virtually contiguous around the
address. This must take two locks - memory_hotplug_lock and
priv->mr.rwlock. Due to memory_hotplug_lock, there can't be any
allocation/free of memory inside.
In the free callback of the memory hotplug event, freed space is searched
from the MR list and corresponding bits are cleared from the bitmap of MRs.
This can fragment a MR and the MR will have multiple search entries in the
caches. Once there's a change by the event, the global cache must be
rebuilt and all the per-queue caches will be flushed as well. If memory is
frequently freed in run-time, that may cause jitter on dataplane processing
in the worst case by incurring MR cache flush and rebuild. But, it would be
the least probable scenario.
To guarantee the most optimal performance, it is highly recommended to use
an EAL option - '--socket-mem'. Then, the reserved memory will be pinned
and won't be freed dynamically. And it is also recommended to configure
per-lcore cache of Mempool. Even though there're many MRs for a device or
MRs are highly fragmented, the cache of Mempool will be much helpful to
reduce misses on per-queue caches anyway.
'--legacy-mem' is also supported.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
There are two capabilities related to CRC stripping:
1. mlx4 HW capability to perform CRC stripping on a received packet.
This capability is built in mlx4 HW. It should be returned by the API
call mlx4_get_rx_queue_offloads().
2. mlx4 driver capability to enable/disable HW CRC stripping. This
capability is dependent on the driver version.
Before this commit the second capability was falsely returned by
the mentioned API. This commit fixes it by returning the first
capability.
mlx4 HW performs CRC stripping by default and this capability is
always reported as "true".
The ability to enable/disable CRC stripping is supported since this
commit and requires OFED version 4.3-1.5.0.0 or rdma-core version v18.
CRC stripping will be done by default regardless of its configuration
when working with OFED or rdma-core versions earlier than those
previously specified or before this commit.
Fixes: de1df14e6e ("net/mlx4: support CRC strip toggling")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Report on TAP supported RSS functions as part of dev_infos_get
callback: ETH_RSS_IP, ETH_RSS_UDP and ETH_RSS_TCP.
Known limitation: TAP supports all of the above hash functions together
and not in partial combinations.
Previous to this commit RSS support was reported as none. Since the
introduction of [1] it is required that all RSS configurations will be
verified.
[1] commit 8863a1fbfc ("ethdev: add supported hash function check")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Company policy discourages the mention of unreleased hardware in
guides and release notes.
Fixes: 08df773 ("doc: update enic guide and features")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Add more descriptions regarding SR-IOV and RSS settings.
Remove 'Multicast MAC filter' and add 'Allmulticast mode' to the
features.
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
After the commit 2a04139f66 ("eal: add single file segments option"),
one hugepage file could contain multiple hugepages which are further
mapped to different memory regions.
Original enumeration implementation cannot handle this situation.
This patch filters out the duplicated files; and adjust the size after
the enumeration.
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In VM2NIC case zero copy may need some tuning to get best performance.
This patch describes the zero copy starved case and provides a tuning
tip.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add two new command-line parameters for either enabling or
disabling locking all memory at app startup.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce API to install BPF based filters on ethdev RX/TX path.
Current implementation is pure SW one, based on ethdev RX/TX
callback mechanism.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduce rte_bpf_elf_load() function to provide ability to
load eBPF program from ELF object file.
It also adds dependency on libelf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
