Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device before the initialization of the related VF device, hns3 VF
PMD driver should get the MAC address from PF driver through mailbox
and configure hardware using this MAC address in the initialization.
The hns3 VF PMD driver get the MAC address form PF driver, if
obtaining a non-zero MAC address from mailbox, VF driver will
configure hardware using it, otherwise using a random MAC address in
the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device after the initialization of the related VF device, the PF
driver will notify VF driver to reset VF device to make the new MAC
address effective immediately. The hns3 VF PMD driver should check
whether the MAC address has been changed by the PF kernel netdevice
driver, if changed VF driver should configure hardware using the new
MAC address in the recovering hardware configuration stage of the
reset process.
3) When user has configured a mac address for VF device by "ip link set
..." command based on the PF device, the hns3 PF kernel ethdev driver
does not allow VF driver to request reconfiguring a different default
mac address and return -EPREM to VF driver through mailbox.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Hardware does not support individually enable/disable/reset the Tx or Rx
queue in hns3 network engine, driver must enable/disable/reset Tx and Rx
queues at the same time.
Currently, hns3 PMD driver does not support the scenarios as below:
1) When calling the following function, the input parameter nb_rx_q and
nb_tx_q are not equal.
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf);
2) When calling the following functions to setup queues, the
cumulatively setup Rx queues are not the same as the setup Tx queues.
rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,,,);
rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,,,);
However, these are common usage scenarios in some applications, such as,
l3fwd, ip_ressmbly and OVS-DPDK, etc.
This patch adds support for this usage of these functions by setup fake
Tx or Rx queues to adjust numbers of Tx/Rx queues. But these fake queues
are imperceptible, and can not be used by upper applications.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The ring is used only by af_xdp PMD itself, so no need to support
multi-producer and multi-consumer mode. This patch changes the ring
to single-producer and single-consumer mode, which could yield better
performance for addr enqueue and dequeue.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The tx_burst routine supporting multi-segment packets with
legacy MPW and without inline was missed, and there was no
valid selection for these options, patch adds the missing
routine.
Fixes: 82e75f8323 ("net/mlx5: fix legacy multi-packet Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Use the API rte_ether_addr_copy to do MAC assignment, instead of
calling rte_memcpy function directly.
Fixes: 84dc7a95a2 ("net/ice: enable flow director engine")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change the iavf base code as driver common library, it is used by iavf
PMD now, and it can be used by other Intel SR-IOV PMDs in the future.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes 'NIC Link is Up, Unknown bps' message in dmesg
for 2.5Gb/5Gb speeds. This problem is fixed by adding constants
for VIRTCHNL_LINK_SPEED_2_5GB and VIRTCHNL_LINK_SPEED_5GB.
Fixes: a58860f689 ("net/i40e/base: use new virtchnl header file")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add X710T*L device specific operations (in port LED detection and
handling of GLGEN_GPIO_CTL.PIN_FUNC field) to enable LED blinking.
Signed-off-by: Damian Milosek <damian.milosek@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some VFs may want to disable CRC stripping on incoming packets
so create an offload for that. The VF already sends information
about configuring it's RX queues so use that structure to
indicate that the CRC stripping should be enabled or not.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce offsets of firmware registers holding a number of EMP resets.
Implement offsets as a preprocessor's constants.
Required by drivers to read a number of EMP resets reported by FW.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The previous code had the LED code wrapped such that, it was
static to the file and not usable outside of it. It is now available.
Signed-off-by: Mateusz Rusinski <mateusz.rusinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There was no time duration statistics for LPI (Low Power Idle)
in EEE (Energy-Efficient Ethernet).
Added new procedure to get duration values from FW.
Otherwise there is no available procedure to get tx_lpi_duration
and rx_lpi_duration values.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.
Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The result of the check is always FALSE and the code within "if"
is never executed.
Signed-off-by: Dzmitry Sautsa <dzmitryx.sautsa@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add defines for creating Flow Director flows as defined in datasheet
section 7.1.5.4 for field vectors.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix display of FEC settings for ethtool.
This patch change variable 'phy.link_info.req_fec_info' sent to ethtool.
Without this patch wrong FEC settings can be shown.
Fixes: 1216fb9f0c ("net/i40e/base: store the requested FEC information")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Mark bits 0xD through 0xF for the command flags of a cloud filter as
reserved. These bits are not yet defined and are considered as reserved
in the data sheet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fixed a bug where driver was breaking out of the loop and
reporting an error without retrying first.
Fixes: 466eec7d6b ("net/i40e/base: retry AQC to overcome IRCRead hangs")
Signed-off-by: Marcin Formela <marcin.formela@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Make i40e_set_mac_type() public. i40e driver requires
i40e_set_mac_type() to be public. It is required for recovery mode
handling. Without this patch recovery mode could not be detected at
probe() function.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds a function to read NVM module data and uses it to
read current LLDP agent configuration from NVM API version 1.8.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update FW API version to 1.9.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Function check_recovery_mode had wrong if statement. Now we check proper
FWS1B register values, which are responsible for the recovery mode.
Recovery mode has 6 values in total. That's why we need 6 different
flags. Now in if statement we recognize type of mac and register value.
Without those changes driver could show wrong state.
Signed-off-by: Adrian Podlawski <adrian.podlawski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds "drop mode" parameter to set mac config AQ command.
This bit controls the behavior when a no-drop packet is blocking a TC
queue.
0 – The PF driver is notified.
1 – The blocking packet is dropped and then the PF driver is notified.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently FW use MDIO I/F number corresponded with current PF for PHY
access. This code allow to specify used MDIO I/F number.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The existing driver allows setting the number of TX descriptors
to the value that is indivisible by 32. This is not properly
supported by x710 hardware. The patch limits the number of TX
descriptors to the whole value of 32.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Dariusz Chaberski <dariuszx.chaberski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a few new status codes and rename a few to make them more
consistent. Error code are mapped to similar values as in
i40e_status.h, so as to be compatible with older VF drivers not using
this status enum.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The upstream virtchnl.h has a few minor style differences to what is
out-of-tree, and there is no real reason we should prefer the current
style over whats upstream.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change introduces new function i40e_get_lpi_counters() reading
Low Power Idle (LPI) mode counters from Energy Efficient Ethernet (EEE)
statistics. Since reading EEE statistics requires running DNL script,
function i40e_aq_run_phy_activity() able to run it, was implemented.
i40e_lpi_stat_update() was introduced as helper function for retrieving
LPI counters' values relative to given offsets.
This change also fixes order of fields in struct
i40e_aqc_run_phy_activity and introduces union in the struct
providing more descriptive names of fields depending on usage
(command or response).
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix for missing "Supported link modes" and "Advertised link modes"
info in ethtool after changed speed on X722 devices with BASE-T PHY
with FW API version >= 1.7.
The same FW API version on X710 and X722 does not mean the same
feature set so the change was needed as mac type of the device
should also be checked instead of FW API version only.
Fixes: e8228f1a16 ("net/i40e/base: report supported link modes")
Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When external PHY is used, MAC register may not reflect actual
state of LPI. Add function reading it directly from PHY or MAC,
depending on what is supported by the device.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change adds i40e_enable_eee() function controlling advertisement
of Energy Efficient Ethernet mode (EEE).
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change introduces i40e_get_fw_lldp_status() function capable of
reporting status of FW Link Layer Discovery Protocol (LLDP) agent.
Since reading LLDP configuration from NVM only gives information what
is the default state of FW LLDP agent after POR, this change introduces
more reliable method for checking if agent is enabled.
Current state of FW LLDP agent may be different if user disabled the
agent, so i40e_get_fw_lldp_status() uses LLDP MIB checking to determine
status of the agent.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch makes it possible to log only AQ descriptors, without the
entire AQ message buffers being dumped too. It should greatly reduce
kernel log size in cases where a full AQ dump is not needed.
Selection is made by setting flags in hw->debug_mask.
Additionally, some debug messages that preceded an AQ dump have been
moved to I40E_DEBUG_AQ_COMMAND class, which seems more appropriate.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Adding bit flags to enable/disable EEE capability for 2.5GBase-T and
5GBase-T PHY types as well as 'Set autonomous EEE for relevant enabled
PHY types' flag.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Michal Litwicki <michalx.litwicki@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some features were introduced in different FW API version on XL710 and
X722 MACs. Others are available only on specific MAC type. Make sure
that they are properly assigned. Also fix the style issues reported by
current check-patch.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New device ids are created to support SFP+ and backplane connections.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This code implements changes necessary for LLDP Agent support.
1. Modified i40e_aq_start_lldp and i40e_aq_stop_lldp. Now Stop and Start
can also be persistent across power cycles.
2. Added new function i40e_aq_restore_lldp which restores factory
setting for LLDP Agent or gets its status.
Signed-off-by: Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch changes an error code for an admin queue head overrun to use
I40E_ERR_ADMIN_QUEUE_FULL instead of I40E_ERR_QUEUE_EMPTY.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There is a need to enable MIB change event, not at the same time as
init_dcb. This patch will serve this requirement.
Modify the i40e_init_dcb to return the correct error when LLDP or DCBX
is not in operational state.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The high 32-bits were being set incorrectly in the 'Set Local LLDP MIB'
AQ command (0x0A08). Change it to use the right macro to get the correct
bits.
Fixes: 1fa6324ad3 ("i40e/base: add new interfaces")
Cc: stable@dpdk.org
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For historical reasons, we allowed 3 VSIs per VF, but never used more
than one. Now with ADq, we can use up to 4 VSIs per VF, so change this
value to match.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Extend NVM Update API to support reporting of features
available for the tools.
This change is needed by NVM Update to determine if driver
supports changing NVM layout from structured to flat.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Setting up supported ptypes using testpmd command is failing
because supported_ptypes_get callback will never return ptypes
supported, as NIX_RX_OFFLOAD_PTYPE_F bit in rx_offload_flags
is zero by default in testpmd.
Fixes: d2706e15e6 ("net/octeontx2: support reduced set of packet types")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
(Not sure if the previous code is checking for true/false condition.
Recommend careful review on this patch.)
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Remove 'typedef char Bool' and use 'bool' instead.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
