Currently, when using VXLAN-GPE or VXLAN item in the flow
both are being treated the same with flags 0x8 in VXLAN
header. Which mean the matching of the item VXLAN-GPE
will match any VXLAN packet.
This fixes the translation of VXLAN GPE item into PMD flow
item. Which will by default set the flags to VXLAN-GPE
to be 0xc.
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Use the MLX5_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX5_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX5_DEBUG is enabled MLX5_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX5_DEBUG is disabled, the global CONFIG_RTE_ENABLE_ASSERT
can still make this assert active by calling RTE_VERIFY inside RTE_ASSERT.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use the RTE_LIBRTE_MLX5_DEBUG configuration flag to get rid of dependency
on the NDEBUG definition. This is a preparation step to switch
from standard assert clauses to DPDK RTE_ASSERT ones in MLX5 driver.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds support for dynamic flag that hints transmit
datapath do not copy data to the descriptors. This flag is
useful when data are located in the memory of another (not NIC)
physical device and copying to the host memory is undesirable.
This hint flag is per mbuf for multi-segment packets.
This hint flag might be partially ignored if:
- hardware requires minimal data header to be inline into
descriptor, it depends on the hardware type and its configuration.
In this case PMD copies the minimal required number of bytes to
the descriptor, ignoring the no inline hint flag, the rest of data
is not copied.
- VLAN tag insertion offload is requested and hardware does not
support this options. In this case the VLAN tag is inserted by
software means and at least 18B are copied to descriptor.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The inline feature is designed to save PCI bandwidth by copying some
of the data to the wqe. This feature if enabled works for all packets.
In some cases when using external memory, the PCI bandwidth is not
relevant since the memory can be accessed by other means.
This commit introduce the ability to control the inline with mbuf
granularity.
In order to use this feature the application should register the field
name, and restart the port.
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are RDMA-CORE versions which are not supported multi-table for
some Mellanox mlx5 devices.
Hence, the optimization added in commit [1] which forwards all the FDB
traffic to table 1 cannot be configured.
Make the above optimization optional:
Do not fail when either table 1 cannot be created or the jump rule
(all =>jump to table 1) is not configured successfully.
In this case, all the flows will be configured to table 0.
[1] commit b67b4ecbde ("net/mlx5: skip table zero to improve
insertion rate")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move Netlink mechanism and its dependencies from net/mlx5 to
common/mlx5 in order to be ready to use by other mlx5 drivers.
The dependencies are BITFIELD defines, the ppc64 compilation workaround
for bool type and the function mlx5_translate_port_name.
Update build mechanism accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As an arrangment for Netlink command moving to the common library,
reduce the net/mlx5 dependencies.
Replace ethdev class command parameters.
Improve Netlink sequence number mechanism to be controlled by the
mlx5 Netlink mechanism.
Move mlx5_nl_check_switch_info to mlx5_nl.c since it is the only one
which uses it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Netlink commands interfaces is included in the mlx5.h file with a
lot of other PMD interfaces.
As an arrangement to make the Netlink commands shared with different
PMDs, this patch moves the Netlink interface to a new file called
mlx5_nl.h.
Move non Netlink pure vlan commands from mlx5_nl.c to the
mlx5_vlan.c.
Rename Netlink commands and structures to use prefix mlx5_nl.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There might be a case that one Mellanox device can be probed by
multiple mlx5 drivers.
One case is that any mlx5 vDPA device can be probed by both net/mlx5
and vdpa/mlx5.
Add a new mlx5 common API to get the requested driver by devargs:
class=[net/vdpa].
Skip net/mlx5 PMD probing while the device is selected to be probed by
the vDPA driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add option to create an indirect mkey by the current
mlx5_devx_cmd_mkey_create command.
Indirect mkey points to set of direct mkeys.
By this way, the HW\SW can reference fragmented memory by one object.
Align the net/mlx5 driver usage in the above command.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The CQE has owner bit to indicate if it is in SW control or HW.
Share a CQE check for all the mlx5 drivers.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move the vendor information, vendor ID and device IDs from net/mlx5 PMD
to the common mlx5 file.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move PCI detection by IB device from mlx5 PMD to the common code.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A new Mellanox vdpa PMD will be added to support vdpa operations by
Mellanox adapters.
This vdpa PMD design includes mlx5_glue and mlx5_devx operations and
large parts of them are shared with the net/mlx5 PMD.
Create a new common library in drivers/common for mlx5 PMDs.
Move mlx5_glue, mlx5_devx_cmds and their dependencies to the new mlx5
common library in drivers/common.
The files mlx5_devx_cmds.c, mlx5_devx_cmds.h, mlx5_glue.c,
mlx5_glue.h and mlx5_prm.h are moved as is from drivers/net/mlx5 to
drivers/common/mlx5.
Share the log mechanism macros.
Separate also the log mechanism to allow different log level control to
the common library.
Build files and version files are adjusted accordingly.
Include lines are adjusted accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The DevX commands interface is included in the mlx5.h file with a lot
of other PMD interfaces.
As an arrangement to make the DevX commands shared with different PMDs,
this patch moves the DevX interface to a new file called mlx5_devx_cmds.h.
Also remove shared device structure dependency on DevX commands.
Replace the DevX commands log mechanism from the mlx5 driver log
mechanism to the EAL log mechanism.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Flow with meter will split to three subflows, the prefix subflow with
meter action do the color, the meter subflow filter the packets, the
suffix subflow do all the left actions for packets pass the filter.
Both the color and the subflow match between prefix and suffix use the
register to store the tag.
For some of the NICs with meter color register share capability, it
only uses 8 LSB of the register for color, the left 24 MSB can be used
for flow id match between meter prefix subflow and suffix subflow.
Currently, one entire register is allocated for flow matching which
causes the NICs with limited registers don't have enough register for
other matching.
Add the meter color share capability checking to fix lacking of
registers issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The id allocated is for the register unique id match. Some registers may
not use the full 32 bits. Add the maximum id to avoid allocate id over
the register restriction.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The ConnectX-5 HW cannot calculate the checksum for ICMPv6,
therefore flows with pattern 'ipv6 proto is 58' with actions that change
the header should be rejected. the actions that change the header
in this type of flow are 'set_ipv6_src' and 'set_ipv6_dst'.
Fixes: 4bb14c83df ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Previous patch fixed the setting of port-id for eswitch rules, which
are ingress only.
This patch expands the fix, to support NIC rules as well, which can
be ingress or egress.
Fixes: ce777b147b ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The cited commit zeroed the UDP checksum for raw-encap case.
Add the same handling for vxlan-encap case.
Fixes: bf1d7d9a03 ("net/mlx5: zero out UDP checksum in encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Compilation massage example:
"dpdk/drivers/net/mlx5/mlx5_flow_dv.c:1087:10: error: comparison of
unsigned enum expression < 0 is always false
[-Werror,-Wtautological-compare]
if (reg < 0)
~~~ ^ ~
"
enum modify_reg holds only non-negative integers and in some places in
the code it was used to be compared with negative value, hence
compilation was failed.
Change all thus places to use integer instead of enum modify_reg.
Fixes: 3e8edd0ef8 ("net/mlx5: update metadata register ID query")
Fixes: 55deee1715 ("net/mlx5: extend flow mark support")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Description of several functions is not accurate.
This patch updates the description, parameter names etc.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'set VLAN VID' action checks twice for existing
same action in flow rule.
This patch updates the validation function logic, to check the same
restrictions more efficiently.
Fixes: 5f163d520c ("net/mlx5: support modify VLAN ID on existing VLAN header")
Fixes: b8c0372bc5 ("net/mlx5: fix set VLAN ID/PCP in new header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'POP VLAN' action includes check for other
'POP VLAN' actions present in flow.
It doesn't check for 'PUSH VLAN' actions present in flow.
This patch adds check for 'PUSH VLAN' actions present in flow.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add missing check in validation function of 'pop VLAN' action.
Action is not allowed for egress flow rules.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add missing check in validation function of 'push VLAN' action.
Action is not allowed for ingress flow rules.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
According to PRM: "Drop action is mutually-exclusive with any other
action, except for Count action".
In current code this limitation is checked separately in validation
function of each action.
This patch removes the discrete checks, and adds a single check common
for all actions.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently the push VLAN action requires a VID value, either from
existing VLAN item, or from following 'set VLAN vid' action.
This patch removes this limitation, allowing a push VLAN action with
vid value 0.
Fixes: b8c0372bc5 ("net/mlx5: fix set VLAN ID/PCP in new header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'push VLAN' action uses (POP_VLAN or PUSH_VLAN)
actions flags, instead of using a mask of both flags.
This patch replaces it to use existing VLAN_ACTIONS mask.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Flow validation function includes, after all items and actions are
validated discretely, a check for VLAN and VXLAN actions.
This check is incorrect and redundant.
This patch removes the invalid check from validation function.
Check is incorrect, action_flags bit map is checked against
items mask MLX5_FLOW_LAYER_TUNNEL.
Check is also redundant, because VLAN push/pop actions can be used
together with packet reformat actions.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
PUSH_VLAN and POP_VLAN actions flags were added to ENCAP_ACTIONS
and DECAP_ACTIONS bit masks, respectively.
This is incorrect, because VLAN actions are considered as 'modify
header' actions, not as 'packet reformat' actions.
This patch removes the PUSH_VLAN and POP_VLAN actions flags from
ENCAP_ACTIONS and DECAP_ACTIONS bit masks.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the root table, there is some limitation of total number of header
modify actions, 16 or 8 for each. But in other tables, there is no
such strict limitation. In an IPv6 case, the IP fields modifying
will occupy more actions than that in IPv4, so the total support
number should be increased in order to support as many actions as
possible for an IPv6 + TCP packet.
And in the meanwhile, the memory consumption should also be taken
into consideration because sometimes only several actions are needed.
The root table checking could also be done in low layer driver and
the error code will be returned if the actions number is over the
maximal supported value.
Fixes: 0e9d000276 ("net/mlx5: check maximum modify actions number")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The meter suffix flow item pointer restore is not correct to decrease
a fixed value. The incorrect operation will cause incorrect match to
the meter suffix flow, the flow create will fail once the magic number
in the wrong offset memory start with RTE_FLOW_ITEM_TYPE_END.
The pointer should decrease the real offset it increases.
Set the decrease value to the real offset the pointer increases to fix
the issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Previous fix added translation of Rx hash fields to PRM format.
This patch optimizes the fix, to perform value translation only
if value is not zero.
In case value is zero, there is no need to translate it.
Fixes: c3e33304a7 ("net/mlx5: fix setting of Rx hash fields")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The free on completion queue keeps the indices of elts array,
all mbuf stored below this index should be freed on arrival
of normal send completion. In debug version it also contains
an index of completed transmitting descriptor (WQE) to check
queues synchronization.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new software manged entity is introduced in Tx datapath
- free on completion queue. This queue keeps the information
how many buffers stored in elts array must freed on send
completion. Each element of the queue contains transmitting
descriptor index to be in synch with completion entries (in
debug build only) and the index in elts array to free buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step, we are going to store the index
of elts to free on completion in the dedicated free on
completion queue, this patch updates the elts freeing routine
and updates Tx error handling routine to be synced with
coming new queue.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The complete request flag is set once per Tx burst call,
the code of appropriate routine moved to the end of sending
loop. This is preparation step to remove WQE reserved field
usage to store index of elts to free.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In the Rx datapath the flags in the newly allocated mbufs
are all explicitly cleared but the EXT_ATTACHED_MBUF must be
preserved. It would allow to use mbuf pools with pre-attached
external data buffers.
The vectorized rx_burst routines are updated in order to
inherit the EXT_ATTACHED_MBUF from mbuf pool private
RTE_PKTMBUF_POOL_F_PINNED_EXT_BUF flag.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add pmd unix socket server to enable external tool applications to
trigger flow dump.
Socket path:
/var/tmp/dpdk_mlx5_<pid>
Socket format:
io_raw: port_id of uint16
file: file descriptor of int
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Dump fdb/nic_rx/nic_tx raw flow data into specified file.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The mlx5 datapath does not implement any endianness conversions
for the metadata being sent and received to provide the better
performance (because these conversions would be performed for
each packet). These metadata are also involved into flow processing
(there might be some flows matching on metadata patterns or setting
the new metadata values) inside the NIC. It order to configure
hardware in correct way all necessary endianness conversions are
done by rte_flow handling code (only once on flow creation). This
patch fixes one of these conversions for the little-endian hosts
in case if META/MARK items are less than 32 bits.
Fixes: acfcd5c52f ("net/mlx5: update meta register matcher set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Matcher is flow table related structure providing the flow pattern
to be translated directly in hardware controlling data. This structure
includes the metadata register c0 field, that might be engaged to
support META and MARK related flow items and actions. Also, this
register might be used by kernel to specify the source vport index.
In this case (if kernel uses the field) the register c0 is split
into two 16-bit subfields - one for META/MARK items and another
to handle vport.
The actual configuration is queried by PMD from kernel in runtime
and depending on the mask returned by kernel the PMD can use upper
or lower half of register c0 field. This patch adds the missing
support for upper half. This missed support caused the non-operational
META/MARK items on some kernel configurations.
Fixes: e554b672aa ("net/mlx5: support flow tag")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Matcher is flow table related structure providing the flow pattern
to be translated directly in hardware controlling data. Some fields
in this structure might be split (by software) between multiple items.
For example, the metadata register c0 field in the matcher might be
split into two independent subfields - the source vport index and
META item value. These subfields have no permanent assigned masks,
the actual configuration is queried from the kernel drivers in
runtime. To handle source vport value (the port of e-Switch which
is origin of the packet) the kernel might use the dedicated vport
field in the matcher or the part of register c0 field, depending
on configuration.
To setup the matcher structure fields the macro MLX5_SET is used.
MLX5_SET configures the specified 32-bit field as whole entity.
For metadata register c0 we should take into account the provided
mask in order to configure the specified subfield bits only,
otherwise setting vport overrides the META values and vice versa.
Fixes: acfcd5c52f ("net/mlx5: update meta register matcher set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The doorbell register is mapped using mmap() and offset
must have off_t instead of unsigned int. Bug is not critical
due to only least significant bits of offset are currently
tested to determine mapping mode.
Fixes: 8409a28573 ("net/mlx5: control transmit doorbell register mapping")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The tx_burst routine supporting multi-segment packets with
legacy MPW and without inline was missed, and there was no
valid selection for these options, patch adds the missing
routine.
Fixes: 82e75f8323 ("net/mlx5: fix legacy multi-packet Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When offloading the meter, should check the action
conf and make sure it is valid.
Fixes: f46bf74887 ("net/mlx5: support meter flow action")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
