When perf-config option is specified, we are calling into the power
library even though it may not necessarily be enabled. It is
questionable whether perf-config option is even applicable to non-power
library modes, but for now, fix it just by avoiding calling into the
power library if it wasn't initialized, and assume that every lcore is
high performance core.
Fixes: e0194feb32 ("examples/l3fwd-power: add interrupt-only mode")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Anything coming from sysfs has a newline at the end. Cut it off before
comparing the strings.
Fixes: 20ab67608a ("power: add environment capability probing")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
If allocation is successful on the first attempt, typically
there is no problem since we allocated everything required and
we'll terminate the loop (if memory chunk is really sufficient
to populate required number of mempool elements).
If the first attempt fails, we try to allocate half
of mem_size and it succeed, we'll have one more iteration of
the for-loop to allocate memory for remaining elements and
should not try the next time with quarter of the mem_size.
It is wrong that max_alloc_size is divided by 2 in the
case of successful allocation as well, or invalid memory
can be allocated, and leads to population failure, then errno
other than ENOMEM may be returned.
Fixes: 3a3d0c75b4 ("mempool: fix slow allocation of large pools")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This node classifies pkts based on packet type and
sends them to appropriate next node. This is node
helps in distribution of packets from ethdev_rx node
to different next node with a constant overhead for
all packet types.
Currently all except non fragmented IPV4 packets are marked
to be sent to "pkt_drop" node.
Performance difference on ARM64 Octeontx2 is -4.9% due to
addition of new node in the path.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add fecmode setting on NIOS SPI primary initialization.
this SPI is shared by NIOS core inside FPGA, NIOS will
use this SPI primary to do some one-time initialization
after power up, and then release the control to DPDK.
Fix the timeout initialization for polling the
NIOS_INIT_DONE.
Fixes: bc44402f ("raw/ifpga/base: configure FEC mode")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
0x4a means idle status on physical layer. when encounter
0x4a on raw data, it need insert a ESCAPE character for
indication.
Fixes: 96ebfcf8 ("raw/ifpga/base: add SPI and MAX10 device driver")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The commit below changed the readiness condition of vhost device to fix
multi-queues issues showed with QEMU versions.
Now, the vhost device is ready when the first queue-pair is ready.
When more queues are being ready, the queue state callback will be
triggered to notify the vhost manager.
In case of Rx interrupt configuration, the vhost driver set the
kickfd queue file descriptor in order to be notified on Rx traffic.
So, when queue becomes ready, the kickfd may be changed and should be
updated in the Rx interrupt structure.
Update kickfd when the queue state callback is invoked.
Also update event notification when it is enabled by the user.
Fixes: d0fcc38f5f ("vhost: improve device readiness notifications")
Suggested-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rx RSS hash offload should be controlled by the user and should
not be enforced by RSS multi-queue Rx mode.
Fixes: 8b945a7f7d ("drivers/net: update Rx RSS hash offload capabilities")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Defines and functions from rte_mbuf_ptype.h are not used.
Only libefx types and EF10 register definitions are used.
Native datapaths should be independent from main libefx interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
efx_types.h uses defines from efx_annote.h, but does not include the
header. As the result if efx_types.h is included by a driver first,
build fails.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
when trying to compile rte_mpls with pedantic enabled,
on old compilers like 4.8 it will complain about bit field definition.
error: type of bit-field 'bs' is a GCC extension [-Werror=pedantic]
error: type of bit-field 'tc' is a GCC extension [-Werror=pedantic]
error: type of bit-field 'tag_lsb' is a GCC extension [-Werror=pedantic]
This fixes the compilation error by adding extension to the header
definition.
Fixes: e480cf487a ("net: add MPLS header structure")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
zmbufs should be set to NULL when getting freed to avoid double free on
the same buffer pointer
Fixes: b0a985d1f3 ("vhost: add dequeue zero copy")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In async enqueue copy, a packet could be split into multiple copy
segments. When polling the copy completion status, current async data
path assumes the async device callbacks are aware of the packet
boundary and return completed segments only if all segments belonging
to the same packet are done. Such assumption are not generic to common
async devices and may degrade the copy performance if async callbacks
have to implement it in software manner.
This patch adds tracking of the completed copy segments at vhost side.
If async copy device reports partial completion of a packets, only
vhost internal record is updated and vring status keeps unchanged
until remaining segments of the packet are also finished. The async
copy device is no longer necessary to care about the packet boundary.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Vring should not be touched if vq is disabled. This patch adds the vq
status check in async enqueue polling to avoid accessing to a disabled
queue.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds the check of dev pointer in vhost async enqueue
completion poll. If a NULL dev pointer detected, the poll function
returns immediately.
Coverity issue: 360839
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Free CQ ring memzone on Rx queue release. This prevents CQ using
incorrect memory size when ring size is reconfigured.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
PMD flow priority is different from application flow priority. Flow
rules with higher match granularity assigned higher PMD priority. Also
PMD splits internally RSS flows according to flow RSS layer.
Final PMD flow rule priority derived from the last match item network
level, after PMD adjusts flow rule, where L4 match gets the highest
priority and L2 the lowest.
The patch adjusts tunnels flow rule priority calculation for PMDs
running verb API.
Introduce MLX5_TUNNEL_PRIO_GET macro.
Fixes: 4a78c88e3b ("net/mlx5: fix Verbs flow tunnel")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Push VLAN action is allowed on Tx only, same as encap action.
Flow rules for hairpin queue are created on Rx, and split
by PMD to Rx and Tx rules, according to the above limitation.
In current implementation the encap action is split to Tx rule.
This patch adds the same handling for push-vlan action, as well as
its complementing actions set-vlan-vid and set-vlan-pcp.
Fixes: d85c7b5ea5 ("net/mlx5: split hairpin flows")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The combination of decap action followed by pop VLAN action is not
fully validated in existing code.
This patch updates the validation function of pop vlan action.
Pop VLAN with preceding Decap requires inner header with VLAN.
Pop VLAN without preceding Decap requires outer header with VLAN.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When debugging performance of a DPDK application the user may
need to view the different statistics of DPDK (for example out_of_buffer)
This can be enabled by using testpmd command 'show port xstats
<port_id>' for example.
The current implementation assumes legacy mode in which the counters
are at <ibdev_path>/<port_id>/hw_counters/<file_name>.
In switchdev mode the counters file is located right after the device
name, hence resides at <ibdev_path>/hw_counters.
The fix tries to open the path in the second location after a failure
to open the file from the first location.
Fixes: 9c0a9eed37 ("net/mlx5: switch to the names in the shared IB context")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The mlx5 PMD did not support queue_start and queue_stop eth_dev API
routines, queue could not be suspended and resumed during device
operation.
There is the use case when this feature is crucial for applications:
- there is the secondary process handling the queue
- secondary process crashed/aborted
- some mbufs were allocated or used by secondary application
- some mbufs were allocated by Rx queues to receive packets
- some mbufs were placed to send queue
- queue goes to undefined state
In this case there was no reliable way to recovery queue handling
by restarted secondary process but reset queue to initial state
freeing all involved resources, including buffers involved in queue
operations, reset the mbuf pools, and then reinitialize queue
to working state:
- reset mbuf pool, allocate all mbuf to initialize pool into
safe state after the crush and allow safe mbuf free calls
- stop queue, free all potentially involved mbufs
- reset mbuf pool again
- start queue, reallocate mbufs needed
This patch introduces the queue start/stop feature with some
limitations:
- hairpin queues are not supported
- it is application responsibility to synchronize start/stop
with datapath routines, rx/tx_burst must be suspended during
the queue_start/queue_stop calls
- it is application responsibility to track queue usage and
provide coordinated queue_start/queue_stop calls from
secondary and primary processes.
- Rx queues with vectorized Rx routine and engaged CQE
compression are not supported by this patch currently
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch continues the work to use DevX API for different objects
creation and management.
On Rx control path, the RQ, RQT, and TIR objects can already be
created using DevX API.
This patch adds the support to create CQ for RxQ using DevX API.
The corresponding event channel is also created and utilized using
DevX API.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Several source files include Verbs header files as in (1). These source
files will not compile under non-Linux operating systems. This commit
removes this inclusion in two cases:
Case 1: There is no usage of ibv_* or mlx5dv_* symbols in the source
file so the inclusion in (1) can be safely removed.
Case 2: Verbs symbols are used. Please note the inclusion in (1) already
appears in file linux/mlx5_glue.h (which represents the interface
to the rdma-core library). Therefore, replace (1) in the source file
with (2). Under non-Linux operating systems - file mlx5_glue.h will not
include (1).
(1)
#include <infiniband/verbs.h>
#include <infiniband/mlx5dv.h>
(2)
#include <mlx5_glue.h>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
1. The shared data communication between the primary and the secondary
processes is implemented using Linux API. Move the Linux API code under
linux directory (file linux/mlx5_os.c).
2. File net/mlx5/mlx5_mp.c handles requests to the primary and secondary
processes (e.g. start_rxtx, stop_rxtx). It is Linux based so it is moved
under linux (new file linux/mlx5_mp_os.c).
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The cleanup refers to header file mlx5.h.
1. Remove unused prototypes.
2. Move prototypes under their correct title.
3. Change functions to static and remove their prototye from the header
file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit eliminates Linux dependencies in shared file mlx5.h.
1. All functions using 'struct ifreq' are moved to file
linux/mlx5_ethdev_os.c such that this struct can be removed from mlx5.h.
2. Function mlx5_set_flags() that uses Linux flags (e.g. IFF_UP) is
changed to static and its prototype is removed from mlx5.h.
3. Remove redundant member verbs_action from 'struct mlx5_priv'.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit adds Linux implementation of routines mlx5_os_set_promisc()
and mlx5_os_set_promisc(). The routines call netlink APIs.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move OS specific MAC operations add, remove, modify VF into file
linux/mlx5_os.c.
Remove unused function mlx5_get_mac().
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The following Linux calls are replaced by their matching rte APIs.
mmap ==> rte_mem_map()
munmap == >rte_mem_unmap()
sysconf(_SC_PAGESIZE) ==> rte_mem_page_size()
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Function calls mlx5_flow_adjust_priority() and
mlx5_flow_discover_priorities() are Verbs based. Move them from file
mlx5_flow.c to file mlx5_flow_verbs.c
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are some limitations on some NICs (at least on ConnectX-6 Dx
and BlueField 2) with supporting FCS (frame checksum) scattering for
the tunnel decapsulated packets.
For the case only one of the features can be supported in the same time,
and the new devarg "decap_en" is introduced to provide the choice to the
users.
If FCS scattering feature is not supposed to be engaged by application,
this new devarg should be specified as "decap_en=0", forcing the FCS
feature enable and rejecting tunnel decap actions in the rte_flow engine.
If FCS scatter is not needed and application supposes to use tunnel
decapsulation in rte_flow, the devarg can be omitted or set to non-zero
value (this is default settings).
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As scatter FCS might be not supported for decapsulated tunnel
packets in some NIC HW, a new capability bit which indicates
if scatter FCS works with decap is added.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit allocates the miscellaneous configuration objects from the
unified malloc function.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit allocates the data path object page and B-tree table memory
from unified malloc function with explicit flag MLX5_MEM_RTE.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit allocates the control path objects memory from the unified
malloc function.
These objects are all used during the instances initialize, it will not
affect the data path.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, for MLX5 PMD, once millions of flows created, the memory
consumption of the flows are also very huge. For the system with limited
memory, it means the system need to reserve most of the memory as huge
page memory to serve the flows in advance. And other normal applications
will have no chance to use this reserved memory any more. While most of
the time, the system will not have lots of flows, the reserved huge
page memory becomes a bit waste of memory at most of the time.
By the new sys_mem_en devarg, once set it to be true, it allows the PMD
allocate the memory from system by default with the new add mlx5 memory
management functions. Only once the MLX5_MEM_RTE flag is set, the memory
will be allocate from rte, otherwise, it allocates memory from system.
So in this case, the system with limited memory no need to reserve most
of the memory for hugepage. Only some needed memory for datapath objects
will be enough to allocated with explicitly flag. Other memory will be
allocated from system. For system with enough memory, no need to care
about the devarg, the memory will always be from rte hugepage.
One restriction is that for DPDK application with multiple PCI devices,
if the sys_mem_en devargs are different between the devices, the
sys_mem_en only gets the value from the first device devargs, and print
out a message to warn that.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add the internal mlx5 memory management functions:
mlx5_malloc_mem_select();
mlx5_memory_stat_dump();
mlx5_rellaocate();
mlx5_malloc();
mlx5_free();
User will be allowed to manage memory from system or from rte memory
with the unified functions.
In this case, for the system with limited memory which can not reserve
lots of rte hugepage memory in advanced, will allocate the memory from
system for some of not so important control path objects based on the
sys_mem_en configuration.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Update the release notes of mlx5 PMD part by adding the
support of eCPRI.
Update the firmware configuration in the mlx5 NIC guide to support
the usage of eCPRI.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
If the NIC or the FW does not support the dynamic flex parser,
it will return error when trying to create the parser for eCRPI.
Then it is hard to know the detail error reason of the failure.
Before creating the parser node and the following usage of the
parser, the capacity bit saved in the HCA_CAP could be used to
confirm if the dynamic flex parser is supported.
If no, an error will be returned directly with ENOTSUP to prevent
the following steps to be executed.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
eCPRI protocol has unified format layout for the variants, over
ETH layer (including .1Q) and UDP layer.
The common header of the message has 4 bytes fixed length, and the
message payload layers are different based on the type field. Now
only type #0, #2 and #5 will be supported, and 2 bytes are needed.
When creating the flex parser, the header will be extended to 8
bytes and 2 DW samples are needed. The 1st DW starts from offset 0
and will be used for the type field of the common header. The 2nd
DW starts from offset 4 and will be used for the physical channel
ID, real-time control ID or measurement ID fields.
The parser will be created once a flow with eCPRI item is observed
for the first time. After creating, it will remain in the system
and HW until the device is stopped. Right now, there is no need to
destroy the eCPRI flex parser after the last flow with eCPRI item
is destroyed. This is to get rid of the alternate states of creating
and destroying eCPRI flex parser with a single eCPRI flow.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In order to use dynamic flex parser to parse protocols that is not
supported natively, two steps are needed.
Firstly, creating the parse graph node. There are three parts of the
flex parser: node, arc and sample. Node is the whole structure of a
flex parser, when creating, the length of the protocol should be
specified. Then the input arc(s) is(are) mandatory, it will tell the
HW when to use this parser to parse the packet. For a single parser
node, up to 8 input arcs could be supported and it gives SW ability
to support this protocol over multiple layers. The output arc is
optional and also up to 8 arcs could be supported. If the protocol
is the last header of the stack, then output arc should be NULL. Or
else it should be specified. The protocol type in the arc is used to
indicate the parser pointing to or from this flex parser node. For
output arc, the next header type field offset and size should be set
in the node structure, then the HW could get the proper type of the
next header and decide which parser to point to.
Note: the parsers have two types now, native parser and flex parser.
The arc between two flex parsers are not supported in this stage.
Secondly, querying the sample IDs. If the protocol header parsed
with flex parser needs to used in flow rule offloading, the DW
samples are needed when creating the parse graph node. The offset
of bytes starting from the header needs to be set. After creating
the node successfully, a general object handle will be returned.
This object could be queried with Devx command to get the sample
IDs.
When creating a flow, sample IDs could be used to sample a DW from
the parsed header - 4 continuous bytes starting from the offset. The
flow entry could specify some mask to use part of this DW for
matching. Up to 8 samples could be supported for a single parse
graph node. The offset should not exceed the header length.
The HW resources have some limitation, low layer driver error should
be checked once there is a failure of creating parse graph node.
Signed-off-by: Netanel Gonen <netanelg@mellanox.com>
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The structures and other definitions will be used for the dynamic
flex parser creation via Devx command interface. These structures
will be used as some some intermediate variables and input
parameters for the parser creation API.
It is better to keep all members consistent with the PRM definition
even though some of them will not be used.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the translation stage, the eCPRI item should be translated into
the format that lower layer driver could use. All the fields that
need to match must be in network byte order after translation, as
well as the mask. Since the header in the item belongs to the network
layers stack, and the input parameter of the header is considered to
be in big-endian format already.
Base on the definition in the PRM, the DW samples will be used for
matching in the FTE/STE. Now, the type field and only the PC ID, RTC
ID, and DLY MSR ID of the payload will be supported. The masks should
be 00 ff 00 00 ff ff(00) 00 00 in the network order. Two DWs are
needed to support such matching. The mask fields could be zeros to
support some wildcard rules. But it makes no sense to support the
rule matching only on the payload but without matching type field.
The DW samples should be stored after the flex parser creation for
eCPRI. There is no need to query the sample IDs each time when
creating a flow rule with eCPRI item. It will not introduce
insertion rate degradation significantly.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When creating a flow with eCPRI header item, the validation of it is
mandatory. The detailed limitations are listed below:
1. Over Ether / VLAN, ethertype must be 0xAEFE.
2. No tunnel support is described in the specification now.
3. L3 layer is only supported when L4 is UDP, see #4.
4. Over TCP is not supported from the specification, and over UDP
is not supported right now.
5. Concatenation indicator matching is not supported now.
6. No need to check the revision.
7. Only type field in the common header is mandatory, and one byte
should be matched integrally.
8. Fields in the message payload header are optional.
9. Only messages with type #0, #2 and #5 are supported now.
Some limitations are only from software right now, because there is
no need to support all the message types and variants of protocol
stack listed in the specification.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The ConnectX-6DX supports the timestamps in various formats,
the new realtime format is introduced - the upper 32-bit word
of timestamp contains the UTC seconds and the lower 32-bit word
contains the nanoseconds. This patch detects what format is
configured in the NIC and performs the conversion accordingly.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The DevX routine to read/write NIC registers via DevX API is added.
This is the preparation step to check timestamp modes and units
and gather the extended statistics.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
