These are driver MACsec configuration routines.
They fill in config structures and prepare these
to be send to FW. Actual configuration will happen in
link interrupt handler.
We declare MACsec offload bits in DPDK offload capabilities
and provide external experimental MACsec API wrappers.
Also update documentation with feature matrix for the
enabled feature.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Here we define hardware and software configuration structures
for MACsec interface. MACSEC itself is implemented in Phy module,
but its configuration is done via firmware interface
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
When launch testpmd with VF and quit testpmd, there'll
be lots of messages "i40evf_handle_aq_msg(): Request 0
is not supported yet", which are triggered during VF
reset and VF needn't do anything. So cancel alarm handler
before VF reset to ignore the admin queue messages.
Fixes: e0e6a7f215 ("net/i40e: cancel alarm handler at the end of closure")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable CLEARPBA bit is required by ice NIC of A0/A1 version to
enable Tx and Rx queue interrupt.
Also enable CLEARPBA bit does no impact on IAVF behaviour when be
hosted by other devices, so we can make it as default.
Fixes: d6bde6b5ea ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
We should use ETH_AF_XDP_RX_BATCH_SIZE in Rx function rather than
ETH_AF_XDP_TX_BATCH_SIZE.
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
As David pointed out, if we reserve N slots for Tx, but only submit n
slots, we would end up with an incorrect opinion of the number of available
slots later, we also would get wrong idx when we call
xsk_ring_prod__reserve next time. It also applies to
xsk_ring_cons__peek()/xsk_ring_cons__release().
This patch ensures that both reserve/submit and peek/release are
consistent.
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Properly report mtu capability in port device info.
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When it fails to allocate enough slots in Tx queue for transmitting
packets, we need to return the dequeued addrs to buf ring.
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When eth_virtio_dev_init() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Found during unit-test fixes.
Fixes: 43d18765c0 ("net/virtio: fix memory leak on failure")
Cc: stable@dpdk.org
Reported-by: Michael Santana <msantana@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
vhost should notify the application in case of all vring state changes.
In general, application should not care about negotiation of
VHOST_USER_F_PROTOCOL_FEATURES. Protocol details like this should
be hidden by the vhost library.
With this patch applications like OVS will be able to assume that
all vrings disabled by default and only process 'vring_state_changed'
events.
Fixes: 321203a54b ("vhost: enable rings at the right time")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Application should be able to obtain information like 'ifname' from
the 'vid' passed to 'destroy_connection' callback. Currently, all the
API calls with passed 'vid' fails with 'device not found'.
Fixes: efba12a78d ("vhost: add user callbacks for socket open/close")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Null value for parameters will cause segfault.
Fixes: d7280c9fff ("vhost: support selective datapath")
Fixes: 72e8543093 ("vhost: add API to get MTU value")
Fixes: a277c71598 ("vhost: refactor code structure")
Fixes: ca33faf9ef ("vhost: introduce API to fetch negotiated features")
Fixes: eb32247457 ("vhost: export guest memory regions")
Fixes: 40ef286f23 ("vhost: export vhost vring info")
Fixes: bd2e0c3fe5 ("vhost: add APIs for live migration")
Fixes: 0b8572a0c1 ("vhost: add external message handling to the API")
Fixes: b4953225ce ("vhost: add APIs for datapath configuration")
Fixes: 5fbb3941da ("vhost: introduce driver features related APIs")
Fixes: 292959c719 ("vhost: cleanup unix socket")
Cc: stable@dpdk.org
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Need to destroy allocated device if application fails to
add new connection or we have fdset failure.
Fixes: acbff5c67e ("vhost: fix crash when exceeding file descriptors")
Fixes: efba12a78d ("vhost: add user callbacks for socket open/close")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The function rte_vlan_insert may allocate a new buffer for the
vlan header and return a different mbuf than originally passed.
In this case, the stored mbuf in txm[] array could point to wrong
buffer.
Fixes: dd856dfcb9 ("virtio: use any layout on Tx")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the incorrect iv offset calculation.
Fixes: b063e843fa ("crypto/virtio: fix IV physical address")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When device promiscuous mode has already been enabled,
should not return error if user re-enable it.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Variable "status" should be defined as "enum ice_status"
instead of "uint16_t". This patch fixes the issue.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
iavf driver reset the dev_info structure. This action will clear
the setting in core library. This patch fix that issue.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
At port detach routine after calling the rte_dev_remove()
testpmd performs some cleanup, checking the statuses of
remaining ports and closes the appropriate ones. The port
scanning is based on the new sibling iterator which uses the
invalid (already closed) port for reference. This patch
replaces the foreach iterator and uses the device object for
reference. It is worth to note this cleanup is not needed
for some drivers (at least for mlx5 and probably for others)
and is preserved due to possible compatibility issues.
Fixes: 13302cd5bd ("app/testpmd: use port sibling iterator in device cleanup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The vring relay thread is created after HW datapath start and is
canceled before HW datapath stop, so we need to take care of the
ring update when the relay thread is not on duty.
Fixes: 4bb531e152 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
The mediated vring's index should be set as initial value before
enabling HW datapath.
Fixes: 4bb531e152 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Relay for Tx queue doesn't provide any benefit, since the packet buffer
in Tx queue is read-only, there's no dirty page logging for Tx buffer.
This change further reduces CPU usage and improves throughput.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Fixes: 88fbedcd5e ("app/testpmd: move speed and duplex parsing in a function")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Using prefix name "ifpga_" for feature and feature_ops data
struct on ifpga base code, which is suggested by Yigit, Ferruh.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is two eth group devices in PAC N3000 card,
each eth group include PHY device and MAC device. Exposing
APIs for DPDK PMD driver to access those devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
1. Add Altera I2C master device driver
2. Add at24 eeprom driver which is i2c slave device
3. Introducing a new ops for opae_manager: opae_manager_networking_ops.
This ops will include some networking operation by FPGA, like vBNG
operation, MAC ROM operation and so on.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is a SPI bus link between A10 FPGA and MAX10 FPGA.
MAX10 is in charge of board management, like power management,
sensors, flash devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Get private features attribute like size, id, address after
enumeration, and insert into FEM or Port dedicate list.
when initial the private feature driver, we just compare the
private feature id between the list and feature drivers array
to match the proper drivers.
This patch avoid the hardcore in feature_info array in previous
implementation. and the same time we can use one driver for mulitple
devices which the id is the same.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
clean up code:
1. use opae_memcpy instead of memcpy
2. use opae_memset instead of memset
3. disable opae_adapter_dump by default
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
In many scenarios, AFU is needed searched by name, this
function add the feature.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
AFU can be implemented into many different acceleration
devices, these devices need shared data to store private
information when they are handled by users.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
On xmit side, there should be a check whether BD ring
has free BDs available before transmit a packet to avoid
data corruption and buffer leak issue.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Support for SXGMII port has been enabled. It will
depends on boot loader information passed through IERB.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
There was an error at rte_constant_bswap64 while compiling
with big endian toolchain. so fixing it by adding type cast.
Also, rte_pktmbuf_alloc API should be used to allocate mbuf
instead of rte_pktmbuf_raw_alloc to avoid use of stale mbuf
information.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
First configure ring with BDs properly then enable
the ring.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
