The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This change aligns the PF behavior with that of the L2-fw, so that flows
(to remove an incorrect MAC) for PF and VF could remain the same.
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
IOV regression testing led to discovery of a minor issue + possibly race
in IOV flows:
a. Malicious indications in VF-database on PF-side get cleared during
FLR flows - but not when disabling SRIOV. At least in Linux if you
disable IOV while having a malicious VF you wouldn't be able to
clear the indication as driver would prevent from initializing it.
b. Possible race during PF response to VF - the channel is made ready
only after sending the rc via dmae to VF. It's possible due to
context switch at end of DMAE [when releasing Mutex] that VF would
start running and send another message prior to PF clearing the
channel, making the FW consider that VF to be malicious.
This patch fixes that by
- clearing the indication even if we're only going to disable VF
- resetting the channel to ready before PF copies the rc to the VF, PF
can then continue and send an additional message
Fixes: 47b302d64624 ("net/qede/base: add handling of malicious VF")
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix an access to an uninitialized list when the management FW is not
initialized by simply doing the list initialization always, at a
previous step, before ecore_mcp_cmd_init() can stop in the middle and
return.
Fixes: 22c996968bf7 ("net/qede/base: revise management FW mbox access scheme")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Remove some dead definitions, function declarations and unused
variables
- Remove an obsolete workaround from ecore_int_igu_enable()
- Remove set variables that are not used
- Remove needless check in ecore_init_wfq_param() when configuring
minimum vport BW. We already check whether total for all vports is
greater than the PF's, so no need to check independently the current
requested configuration as well.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Changes include:
- adding new log to print Dcbx version
- reformatting log in ecore_dmae_operation_wait() in case of DMA engine
failure
- changing verbosity of some log messages such as:
VFs incorrect behavior should be logged on PF with DP_VERBOSE(), not
DP_NOTICE(). In general keep IOV-related logs at low verbosity.
Log the critical issues from VF perspective, like message to PF
times-out or the PF rejects the VF configuration, as NOTICE than
VERBOSE
- Add a printout of some MCP CPU info in case of no MFW response
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Introduce OSAL_IOV_VF_VPORT_STOP to allow VF to carry out required
operations and prevent a potential assert before closing vport
- Add OSAL_DIV_S64() for 64-bit division on 32-bit platforms.
- Add OSAL for transceiver update OSAL_TRANSCEIVER_UPDATE()
- Add OSAL for MFW command preemption OSAL_MFW_CMD_PREEMPT() within the
spinning loops while sending a mailbox command to the MFW
- Implement OSAL_SPIN_LOCK_IRQSAVE macro
- Rename OSAL_NUM_ACTIVE_CPU() to OSAL_NUM_CPUS()
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Introduce 2 new API functions, one for the VF and the other for
PF [per-VF] which allows to decide whether to use HW/SW channel
for PF<->VF communication(a per-VF configuration). A HyperV might
have different VMs with different requirements.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support to firmware for:
- New SFP type 1000BaseT
- DON (Diag Over Network). This feature implements a server side for
process data access commands over Ethernet.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Retain user dcbx configurations till the config is applied to the adapter
i.e. till the negotiation completes. If base driver receives a config
update before negotiation completes, then base driver merges the new config
with the cached config and sends it to management FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add per-PF virtual link support.
This feature adds a logical layer over the physical link to reflect the
control of OEM management protocols either thru' sideband or a switch.
For example, a switch could send a link-down tlv for a PF and this will
put down logical link and virtual link in shared mem (SHMEM) for that PF
inspite of physical link being up for that port.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Add an internal API ecore_dcbx_get_dscp_value() for getting the
dscp value for a given priority.
- Initialize dscp parameters in the dcbx-config cache to be used by
the clients for configuring dcbx parameters.
- Reset NIG_REG_DSCP_TO_TC_MAP_ENABLE register when user disables the dscp.
- Fix to always send "dscp + dcbx" update to FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Determines whether VF utilizes doorbells via limited register bar or via
the doorbell bar and return the size of the HW doorbell bar via acquire
response. By doing that limit the VF CIDs to an amount that would make sure
doorbells for all CIDs fall within the bar.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for UFP (Unified Fabric Port) multi-function mode.
It includes new APIs for reading UFP configuration, handling
UFP events, retriving UFP status and UFP ramrod update etc.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Upgrade QEDE PMD FW to version 8.30.12.0.
The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add source QP field for GSI offload.
- Add UFP support.
- Add support for outer IPv4 TX CSO with unknown tunnel type (in addition
to inner header CSO).
- Support flow ID in accelerated RFS flow.
- Allow Doorbell on empty SPQ and LL2 TX queue (for doorbell recovery).
- Enable PCI Relaxed Ordering for L2 RX data placement.
- Additional enhancements and bug fixes
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Configure only the available/requested number of app entries rather
than max entries (DCBX_MAX_APP_PROTOCOL) in ecore_dcbx_get_app_data().
Also, fixed a minor issue where incorrect size value is being passed for
memcpy().
Fixes: 26ae839d06e9 ("qede: add DCBX support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change verbosity of events related to malicious VFs to DP_NOTICE
from DP_INFO. They are not just informational events.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Add ECORE_IS_CMT macro (CMT: couple mode teaming) and use that in all the
places where there are checks for number of HW functions per device > 1.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
If for some reason the send message from VF to PF times out, don't bail out
right away without taking proper cleanup action. The goto statement calls
ecore_vf_pf_req_end() which will unlock the mutex previously held.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Make ecore_dcbx_set_local_params(), ecore_cm_init_pf() as static
- Remove src_proto()
- remove reference to PROTOCOLID_TOE when determining whether a a protocol
requires SRC ILT memory
- Add auxiliary variables in various places
- All other changes are simple semantic corrections
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Turn ecore_ptt_get_hw_addr() into static
- Convert ecore_dcbx_get_operational_params() to void since we don't
care about the return value
Fixes: 26ae839d06e9 ("qede: add DCBX support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Use OSAL_PAGE_SIZE instead of assuming it to be 4096.
- While at it make sure the minimum number of doorbells that can be issued
is 4.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Avoid having num_of_ports as 0 [to prevent a division by 0 via
MFW_PORT()]. Also fix the MFW_PORT() macro for CMT.
- Read the device's number of ports from shmem.
- Rename num_ports_in_engines to num_ports_in_engine.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add base driver API to read per queue coalescing from hardware.
Move ecore_set_rxq|txq_coalesce() declarations to ecore_l2.h.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix the ECORE_IS_[AB]0() macros to check both the chip revision and the
chip metal. Realign defines in the struct ecore_dev.
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This is an attempt to clean up many unused API parameters across the base
code. Most of the changes are related to removing unused p_hwfn or p_ptt
handlers. The warnings are generated using 'unused-parameter' cflags.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
PF checks upon stop-vport from VF whether it's legal, but if it's not it
would STILL send the request to FW, which might cause it to assert.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Block sending of mailbox command to the management FW if it is not
responsive. Use MCP_REG_CPU_STATE_SOFT_HALTED register to verify the MCP
is actually halted after sending the halt command and before proceeding
further.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for doorbell overflow recovery mechanism:
The doorbell recovery mechanism consists of a list of entries which
represent doorbelling entities (l2 queues, roce sq/rq/cqs, the slowpath
spq, etc). Each entity needs to register with the mechanism and provide
the parameters describing it's doorbell, including a location where last
used doorbell data can be found. The doorbell execute function will
traverse the list and doorbell all of the registered entries.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
For chip variant CHIP_NUM_AH_xxx, MSI-x configuration for VFs is controlled
per-PF [for all of its child VFs] instead of on a per-VF basis. A flag
called "dont_override_vf_msix" is added that allows the caller/client to
specify the mode they want to operate. If dont_override_vf_msix is false as
in the case of VF of CHIP_NUM_AH_xxx, first a check is made as to what is
currently configured number. Management FW will be asked to configure the
requested number only if its bigger than the currently configured value.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Changes for management FW, change of _SHIFT defines to _OFFSET.
Accordingly, rename and fix the ECORE_MFW_GET_FIELD() and
ECORE_MFW_SET_FIELD() macros and update wherever used.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a function that provides default initialization to resc lock/unlock
parameters. Change acquire flow that use resources into using this
function.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
