The ioat driver has been superseded by the ioat and idxd dmadev drivers,
and has been deprecated for some time, so remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With DMA devices supported as a separate flavor of devices,
the DPAA2 QDMA driver is moved in the DMA devices.
This change removes the DPAA2 QDMA driver from raw devices.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add initial support for PMD that allows to control particular pins form
userspace. Moreover PMD allows to attach custom interrupt handlers to
controllable GPIOs.
Main users of this PMD are dataplain applications requiring fast and low
latency access to pin state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Removing the rawdev based octeontx2-ep driver as the dependent
common/octeontx2 will soon be going away. Moreover this driver is no
longer required as the net/octeontx_ep driver is sufficient.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Removing the rawdev based octeontx2-dma driver as the dependent
common/octeontx2 will be soon be going away. Also a new DMA driver will
be coming in this place once the rte_dmadev library is in.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Add baseband PHY CGX/RPM skeleton driver which merely probes a matching
device. CGX/RPM are Ethernet MACs hardwired to baseband subsystem.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Ensure all lists of drivers are standardized:
* one driver per line
* lists double-indented with spaces (as they are line continuations)
* elements in alphabetical order
* opening and closing list brackets "[" & "]" on own lines
* last element has trailing comma
Any code snippets in the list files is adjusted to single-indent using
whitespace to correspond to the new style also.
The lists of standard library dependencies per class, and other short
lists are not formatted one-per-line as these lists are not expected to
grow beyond 2 or 3 entries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As announced in the deprecation note, remove all compatibility build
defines from previous make/meson versions and use only the standardized
ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
